Shopping Cart
There are no more items in your cart
Yokomo BD11 Touring Car kit, carbon chassis
MRTC-BD11
YOKOMO
1/10 scale racing chassis kit with 4x4 drive and carbon plates.
Express delivery
Large selection of carriers
Satisfaction guarantee
Yokomo BD11
The BD10 platform has been a huge success for us. It was clear in advance that improving the car even more would be a challenge. Anyway, now it's time for a completely new racing car platform.
The ideology behind the new design is to meet the demands of end users. We want to create a completely new experience for you, so that you can enjoy racing competitively . Our big priority is the quality and performance of our products. Over the past year, we have frequently called in our factory riders to test and develop this project. Now we are finally ready to introduce you to the brand new BD11 platform .
Thanks to Yokomo's extensive development, the BD11 is user-friendly, easy to work with, and a winner !
Properties
- Pronounced long solid carbon suspension arms are constructed from hybrid plastic and aluminum parts to reduce chassis roll and improve cornering speed.
- The kit is basically equipped with an active rear camber system . This system allows the driver to increase speed when going through a corner, allowing even higher acceleration on the exit!
- The front antlers underwent a dramatic change in shape. Splitting the left and right sides makes the front of the car flexible for optimal feel. Parts to increase stiffness for riding on grippy surfaces will also be available.
- The front double-link half-axles have also been redesigned for improved accuracy and durability. A stabilizer was also installed under the suspension arms to achieve a lower center of gravity.
- The upper plate has a new shape to correspond with the set elasticity of the lower plate. The front side can be used with a stiffener, allowing the stiffness balance to be adjusted according to the surface.
- The rear side of the top plate is attached by a post, but the lateral tilt is set to soft, while maintaining the rigidity of the longitudinal tilt, thanks to the placement of the bearings and the fine adjustment of the ground clearance.
- The back side of the top plate has a deflection structure supported by a roller pin with an o-ring insert. This maximizes the torsional flexibility of the chassis for better rear axle traction.
- The front and rear shock absorbers also have newly designed guide rings for even smoother operation.
| Scale | 1/10 |
| Wheelbase [mm] | 256 |
| Width [mm] | 198 |
| Chassis type | Road, Racing |
| Engine type | AC, DC |
| Li-Po [Art.] | 2 |
New and improved adjustment module for EzRun, XeRun, Platinum and Seaking series controllers. Option to display measured values in real time (only for some ESCs). Dimensions 30x25.5x8.5mm. Weight 10.2g. You need to use the new version of the mobile app...
- Special price
Tweezers with pointed bent ends. Overall length: 114mm
Mini soldering iron 60W with microprocessor temperature control (100-400 °C) with 12-24 V power supply. LED display and 2 buttons for easy operation. Adjustable operating temperature, temperature compensation and intelligent standby mode for energy...
Hex key / screwdriver with aluminum handle and replaceable shank.
Hex key / screwdriver with aluminum handle and replaceable shank.
Hex key / screwdriver with aluminum handle and replaceable shank.
Bag dimensions: 54 x 26 x 22 cm.
Last items in stock
Transport bag on wheels with five compartments and pull-out handle. Dimensions: 60 x 37 x 60 cm.
Dual-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with a current of 0.2–12 A (max. 200 W). Discharge 2x 0.1–1.5 A (max. 2x15 W). Power supply 230 V. Internal resistance...
High-performance two-channel fast charger with balancers for 2-16 units. Li-Po/Li-ion/Li-Fe/LiHV/ULiHV with a current of 1-20 A (max. 2x1100 W). Discharge 2x 0.5-3.0 A (max 2x50 W). Power supply 230 V. Measurement of internal resistance.
KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
Intelligent soldering station with 90W micro soldering iron with microprocessor temperature control (50–480 ° C). Mains supply 230V / 50Hz. LED display and 3 buttons for easy operation. Adjustable operating temperature, soldering tip temperature...
Soldering station with 60W pencil micro-soldering iron with microprocessor temperature control (200–480 ° C). Mains supply 230V / 50Hz. LED display and knob for easy operation. Adjustable operating temperature. Replaceable soldering tip, grounded to...
LED programming box for Platinum V1 / V2 series flight controllers, Flyfun V5, for a large number of XeRun, EzRun and QuicRun series car controllers (alternating ESC). And also for Seaking ship regulators. Specific supported versions in the description.
Programming card for Flyfun and Skywalker controllers. Input voltage 4.8-6V.
Adjustable aluminum wing mounts for 1/10 on-road racing specials.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO aluminum stand for 6 pcs screwdrivers, 4 pcs electric screwdriver bits and mobile phone. Including compartments for storing parts, a screw gauge and holes for soldering XT60 and 2, 3.5, 4 and 5mm bullet connectors.
Side and rear reinforcements for 1/10 on-road bodywork.
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 15.6 and 19mm shock absorber plates, 1/10 and 1/8 differential mount. Including strong packaging for transport.
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 14.8 and 15.6mm damper plates, 1/10 differential mount. Including strong packaging for transport.
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
Oils - Shock " Differential
MIBO Racing Oil set for 1/10 Onroad shock absorbers/differential incl. bags
MIBO
MB-8002
A set of silicone oils for shock absorbers and differential in viscosities most used for on-road racing. Including a practical nylon bag.
A tire grinder for easy removal of the center seam on new RC car tires. Power supply 7.2-12V (2S LiPo, 12V mains supply), XT-60 connector, cable with G4 connectors is included in the package.
Rear reinforcement for 1/10 on-road bodywork.
MIBO file with light carbon handle and round tip. Black handle.
Last items in stock
MIBO lightweight black carbon handle with 3mm diameter hole. Suitable for 1.5mm and 2.0mm hex, file tip and other bits with 3mm diameter.
MIBO lightweight black carbon handle with 4mm diameter hole. Suitable for 3.0mm hex and other bits with 4mm diameter.
The set contains black screwdrivers with a carbon handle in sizes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket).
The set includes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket) black screwdrivers with a carbon handle, and an aluminum stand for 6 screwdrivers, 4 electric screwdriver bits and a mobile phone. Including compartments for storing parts, gauge w
Side reinforcement for 1/10 on-road bodywork.
Last items in stock
MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
Adjustable aluminum front body mount for drift cars with strong 10mm magnets and hidden construction for a clean chassis look.
Last items in stock
stands
Multi-stand and holder - trays - soldering holder - CNC milled - color red
Team Corally
C-16306
The massive aluminum multifunctional plate is a great helper when servicing your RC car models. Includes 4 small parts compartments, connector holders, damper and damper rod holders and gauge. The surface is red anodized.
Last items in stock
stands
Multi-stand and holder - trays - soldering holder - CNC milled - titanium color
Team Corally
C-16305
The massive aluminum multifunctional plate is a great helper when servicing your RC car models. Includes 4 small parts compartments, connector holders, damper and damper rod holders and gauge. The surface is titanium anodized.
Last items in stock
Pliers with long, curved, thin, flat jaws. Jaw width 1-5mm.
Pliers with thin flat jaws.
Last items in stock
Store your HPI tools in a quality zipper closure.
Bag fits 1/10 2 and 4wd Buggy: Dimensions: 390x280x100mm
The bag fits for 1/10 Touring Car chassis. Dimensions: 460x220x120mm
Last items in stock
Tool bag: Dimensions: 280x230x90mm
Last items in stock
The set includes: side splitting pliers, semicircular straight pliers and curved ball joint pliers. The pliers are made of steel. The handles are coated with two-tone PVC.
- New
Two-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb current 0.1-15A (max. 2x100W). Discharge 0.1-3.0A (max. 2x8W). 230 V power supply. Internal resistance measurement, USB port,...
Microprocessor charger 30W with balancer for 2-4 cells Li-poly / Li-Fe with switchable current 1, 2 or 3A. Mains supply 100-240V. Ideal as a much more powerful and intelligent replacement for "box" chargers from RTF / RTR sets.
Tin 63Sn/37Pb 1.2% Flux Diameter 1.0mm, 100g.
Last items in stock
Transport bag with two drawers for transporting accessories for RC cars or its accessories. The size of the drawer is 30 x 48 x 15 cm, the size of the bag is 54 x 34 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made of plastic...
Transport bag with two drawers for transporting RC car accessories or its accessories. The dimensions of the drawer are 30 x 48 x 15 cm, the dimensions of the bag are 54 x 51 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made...
Last items in stock
Adapter for LRP FLOW X and NOSRAM HD controllers (all versions) and older FLOW, iX8 and SPIN.
Last items in stock
Adapter for LRP FLOW X and NOSRAM HD controllers (all versions) and older FLOW, iX8 and SPIN.
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
The clear body for 1/10 GT models is covered with a protective foil, made of high quality polycarbonate, the package contains camouflage stickers including stickers.
The clear body for 1/10 GT models is covered with a protective foil, made of high quality polycarbonate, the package contains camouflage stickers including stickers.
Last items in stock
Clear mock-up body for touring cars in 1/10 scale.
Last items in stock
Clear mock-up body for passenger cars in 1/10 scale.
Last items in stock
The 190 mm wide clear body for 1/10 touring models is made of lightweight 0.4 mm AIRlite polycarbonate (weight 45 g), the package includes camouflage stickers including stickers.
Last items in stock
The 190 mm wide clear body for 1/10 touring models is made of lightweight 0.5 mm UltraLight polycarbonate (weight 55 g), the package includes camouflage stickers including stickers.
The 190 mm wide clear body for 1/10 touring models is made of lightweight 0.7 mm ZOOlite polycarbonate (weight 75 g), the package includes camouflage stickers including stickers.
Last items in stock
The clear body for the ON ROAD 190mm models is covered with a protective foil, made of high-quality polycarbonate, the package contains camouflage stickers including stickers.
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
The clear body for 1/10 GT models is covered with a protective foil, made of high quality polycarbonate, the package contains camouflage stickers including stickers.
Last items in stock
1/10th scale clear model touring car body.
The clear body for 1/10 GT models is covered with a protective foil, made of high quality polycarbonate, the package contains camouflage stickers including stickers.
Last items in stock
Last items in stock
Clear body for categories TC 1/10 190mm, EFRA 4083
Last items in stock
Clear body for category TC 1/10 190mm
The CARTEN T410 is the base model of our Touring Car range. Cardan drive for the smoothest possible drive train with minimal resistance.
The CARTEN T410 FWD Competition 1/10 Electric Touring Car kit is based on the T410R Touring Car, but designed for FWD (front wheel drive) racing.
The CARTEN T410R is a racing model from our Touring Car range. Cardan drive for the smoothest possible drive train with minimal resistance.
1/10 scale folding touring car chassis. The chassis does not contain electronics, RC kit or drive battery or wheels and body.
Last items in stock
Specially designed chassis for RWD / 2WD drifting with a carbon chassis. Model kit without RC kit and electronics.
Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry 10-channel computer steering wheel 2.4GHz RC kit for racing model cars and boats. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40 models +
Last items in stock
Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry 10-channel computer steering wheel 2.4GHz RC kit for racing model cars and boats. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40 models +
Futaba T-FHSS Telemetry/S-FHSS/FHSS Four Channel Computer Steering Wheel RC Kit for Recreational Car and Boat Models. Switch for 3rd channel, 4th channel controlled by mix, memory for 10 models, program settings of functions (incl. ABS) and mixes. With...
4-channel RC kit with telemetry with FHSS5 transmission including 1 RX-493i receiver.
Five-channel steering wheel RC kit 2.GHz FHSS for recreational model cars and boats. 3 digital trims, rotary knob and 2 pushbutton switches assignable for channels 3-5 or mixes. Memory for 30 models, settings for mixes, double deflections, endpoints,...
Seven-channel steering wheel RC kit 2.GHz FHSS for recreational model cars and boats. 3 digital trims, rotary knob, 2 3-position stick and 2 pushbutton switches assignable for channels 3-7 or mixes. Memory for 30 models, mix settings, double...
Bidirectional waterproof speed controller for RC cars and boats 60A (from 18 threads up), power supply 4.8-7.4V (with BEC stabilizer 5.0V / 1A, dimensions 26x26x15.7mm, 19g.
Last items in stock
One-way programmable AC regulator for car models. For motors from 3.0 thread (Brushless), (continuous current 400A), power supply 3.7-7.4V, weight 40g, BEC 6V/3A. (NiMh/LiPo/LiFe) incl. Sen. cable, dimensions: 32x34x21mm
One-way programmable AC regulator for car models. For motors from 3.0 thread (Brushless), (continuous current 400A), power supply 3.7-7.4V, weight 40g, BEC 6V/3A. (NiMh/LiPo/LiFe) incl. Sen. cable, dimensions: 32x34x21mm
Last items in stock
Electronic speed controller, direct successor of the world-famous COMET HD, winner of several IFMAR and EFRA competitions.
- Special price
Electronic bidirectional controller 60 A series QuicRun for DC motors, waterproof, dustproof, with built-in BEC, suitable for 1/10 Touring Car / Buggy / Trucks / Rock Crawlers.
Two-way AC waterproof regulator for car models. For motors from 5.5 thread (Brushless), ZERO BOOST program, power supply 7.2-14.8V (2-4S LiPo), weight 32g, BEC 6V/2A, dimensions 36x38.5x22mm (supplied including sensor cable)
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
Last items in stock
New electronic AC regulator of the XERUN series made especially for categories with Zero-boost. Regulator with built-in BEC circuit and integrated heatsink for max. Output. Ideal for 1/10 and 1/12 scale touring cars.
XeRun 160A series electronic AC regulator with maximum peak current up to 1200A, built-in SBEC circuit 6-7.4V/4A and programmable via LCD programming box. Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 3.5 hp
Electronic AC regulator of the XeRun series with a maximum peak current of up to 1200 A, built-in BEC circuit and programmable via HW OTA module (BT). Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 4.5 Touring threads...
Electronic AC regulator of the XeRun series with a maximum peak current of up to 1200 A, built-in BEC circuit and programmable via HW OTA module (BT). Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 4.5 Touring threads...
DC electric motor size "540" with a nominal voltage of 7.2 V. Operating voltage range 3.7–12 V, speed at a nominal voltage of 23500 rpm. Diameter 36 mm, housing length 50 mm, shaft diameter 3.175 mm, weight 189 g.
AC JUSTOCK G2.1 motor, SENZORED, use for 1/10, 1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck / Truck) STOCK / SPORT Race, Rock Crawler (21.5T, 25.5T only)
AC JUSTOCK G2.1 motor, SENZORED, use for 1/10, 1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck / Truck) STOCK / SPORT Race, Rock Crawler (21.5T, 25.5T only)
Last items in stock
16 threaded DC motor. Diameter: 36mm, length 57mm, motor shaft 3.175mm, operating voltage: 4.8-9.6V (4-8 NiCd / NiMH or 2S LiPo)
Last items in stock
Sensor AC electric motor for 1/10 models, 10.5 turns, 3,300 rpm at 1V, power 270 W, Lixx 1-2s power supply, shaft 3.175 mm, 2 pole, motor length 53.9 mm, motor diameter: 35.8 mm , Resistance 0.0151 Ohm, maximum load 70 Amp., weight 166g
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 10.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 4.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1-2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 4.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 5.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 5.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 6.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 6.5 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 8.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 8.5 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 9.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 9.5 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm, (sensory motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 17.5 threads, shaft 3.17mm (sensory motor).
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 21.5 threads, shaft 3.17mm (sensory motor).
Last items in stock
540 size AC sensor motor. Armature: sintered 12.5mm, operating voltage: 2S/7.4V, body length 51.6mm, diameter: 35.9mm, weight: 152g, 10.5 turns, timing adjustment range: 20- 60°, shaft 3.175mm. EFRA legal.
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 10.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 4.0 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1-2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 4.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 5.0 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 8.0 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 9.0 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 10.5 threads, shaft 3.17mm (sensory motor).
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm, (sensory motor)
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm (sensory motor).
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 21.5 threads, shaft 3.17mm (sensory motor).
Last items in stock
TEAM CORALLY VULCAN AC motor. Operating voltage: 1S-2S, body length 52.4 mm, diameter: 35.8 mm, weight: 165 g, speed per 1 Volt: 3,450 rpm, shaft 3.17 mm. EFRA, IFMAR, ROAR, BRCA, DMC regular
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
Last items in stock
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
New XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
The HobbyWing V10 G3 is the evolution of the previous G2 engine series - the redesigned design, the higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
The HobbyWing V10 G3 is the evolution of the previous G2 engine series - the redesigned design, the higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
Last items in stock
The HobbyWing V10 G3 is the evolution of the previous G2 engine series - the redesigned design, the higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
Sport
HV Hyper LCG Modified GRAPHENE-4 5200mAh Hardcase Battery - 7.6V LiPo - 120C / 60C
LRP Electronic
L431272
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
Last items in stock
Sport
HV LCG Modified GRAPHENE-4.1 6550mAh Hardcase Akku - 15.2V LiPo - 120C/60C
LRP Electronic
L432251
The latest generation of the LRP battery of 2023. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
Sport
HV LCG Stock Spec GRAPHENE-4 6100mAh Hardcase Battery - 7.6V LiPo - 130C / 65C
LRP Electronic
L431281
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation of NOSRAM batteries by 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
Sport
HV LCG ULTRA Stock Spec GRAPHENE-4.1 5100mAh Hardcase Akku - 7.6V LiPo - 135C/65C
LRP Electronic
L432277
The latest generation LRP battery of 2023/2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
Sport
HV Stock Spec GRAPHENE-4 7400mAh Hardcase Battery - 7.6V LiPo - 135C / 65C
LRP Electronic
L431276
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation of NOSRAM batteries by 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
Last items in stock
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation of NOSRAM batteries by 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation NOSRAM battery of 2022/2023. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
Sport
HV Stock Spec GRAPHENE-4 9400mAh Hardcase Battery - 7.6V LiPo - 135C / 65C
LRP Electronic
L431279
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation NOSRAM battery of 2023/2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with higher performance with less electrical resistance between the cells, i.e....
The latest generation of NOSRAM battery in 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
Sport
HV Ultra LCG Modified GRAPHENE-4.1 6500mAh Hardcase Akku - 7.6V LiPo - 120C/60C
LRP Electronic
L432282
The latest generation of the LRP battery of 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
Sport
HV Ultra LCG Modified GRAPHENE-4.1 6500mAh Hardcase Akku - 7.6V LiPo - 120C/60C
NOSRAM
N999758
The latest generation of NOSRAM battery in 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
Sport
HV Ultra LCG Modified Shorty GRAPHENE-4.1 4200mAh Hardcase Akku - 7.6V LiPo - 120C/60C
LRP Electronic
L432273
The latest generation of the LRP battery of 2022. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
Last items in stock
MIBO HV LiPo battery pack with discharge currents up to 130C/260C. Two-cell 2S1P 7.6 V 4000 mAh, dimensions 93x47x18 mm, weight 147 g, 4 mm connectors included. Black color.
Last items in stock
MIBO HV LiPo battery pack with discharge currents up to 130C/260C. Two-cell 2S1P 7.6 V 4000 mAh, dimensions 93x47x18 mm, weight 147 g, 4 mm connectors included. Violet.
MIBO HV LiPo battery pack with discharge currents up to 130C/260C. Two-cell 2S1P 7.6 V 4000 mAh, dimensions 93x47x18 mm, weight 147 g, 4 mm connectors included. Red colour.
MIBO HV LiPo battery pack with discharge currents up to 130C/260C. Two-cell 2S1P 7.6 V 4000 mAh, dimensions 93x47x18 mm, weight 147 g, 4 mm connectors included.
Last items in stock
Ideal Hardcase Set for 1/10 TC Modified.
Last items in stock
Team Corally VOLTAX HiVolt version for real racers with 6400mAh capacity in LCG Stick Hardcase version. Dimensions: 138.5x47x22mm, charging current max. 3C/19.2Amp., G4 power connector, G2 balance connector, Weight: 262-284g
Last items in stock
Team Corally VOLTAX HiVolt version for real racers with 8000mAh capacity in Stick Hardcase version. Dimensions: 138.5x47x25mm, charging current max. 3C/24Amp., G4 power connector, G2 balance connector, Weight: 300-325g
Digital HiVolt standard servo with Brushless motor and metal gears.
Digital HiVolt standard servo with Coreless motor and metal gears.
Digital HiVolt standard servo with Coreless motor and metal gears.
Programmable digital HiVolt standard servo with Coreless motor and metal gears.
Digital standard servo with DC motor and metal gears.
Very strong and fast low profile digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for 1:10 racing cars. Support S.BUS, S.BUS2 and SR mode. Power supply 5.0-8.4V. Thrust 23kg.cm, speed 0.08s/60° at 6.0V, thrust...
Last items in stock
Specially designed chassis for RWD / 2WD drift with plastic chassis plates. Chassis kit without electronics, wheels and body.
Last items in stock
Specially designed chassis for RWD / 2WD drift with carbon chassis plates and selected aluminum parts. Chassis kit without electronics, wheels and body.
Last items in stock
Specially designed chassis for RWD / 2WD drifting with plastic chassis. Model kit without RC kit and electronics.
Tap to zoom
