CARTEN T410 1/10 4wd Touring Car ARTR
NHA101
The CARTEN T410 is the base model of our Touring Car range. Cardan drive for the smoothest possible drive train with minimal resistance.
Express delivery
Large selection of carriers
Satisfaction guarantee
The T410 is the basic touring car model from CARTEN RC. The car is based on a composite chassis and features fully adjustable suspension, oil-filled shock absorbers and a very efficient drive with ball differentials and a central drive shaft. You can set all important parameters to find suitable settings for all lines.
The CARTEN T410 is a great car for beginners who want to start with an RC hobby. It is also ideal for club races or Sunday races in the car parks.
Properties:
- Complete set of ball bearings
- CVD steel drive shafts (front)
- Chassis, upper plate and shock absorber towers made of composite material
- Aluminum center drive shaft
- Aluminum front gear mount
- Aluminum engine mount
- 12mm hexagon wheels
- Oil shock absorbers
- Ball differentials _
- Width: 190 mm
- Wheelbase: 258 mm
Need to complete:
- Size 540 engine for 1/10 models
- Electric regulator
- Lipo b 7.4V standard dimensions
- Lipo battery charger
- Dual channel transmitter with receiver
- Power steering
- Bodywork
Adjustable aluminum wing mounts for 1/10 on-road racing specials.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO aluminum stand for 6 pcs screwdrivers, 4 pcs electric screwdriver bits and mobile phone. Including compartments for storing parts, a screw gauge and holes for soldering XT60 and 2, 3.5, 4 and 5mm bullet connectors.
Side and rear reinforcements for 1/10 on-road bodywork.
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 15.6 and 19mm shock absorber plates, 1/10 and 1/8 differential mount. Including strong packaging for transport.
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 14.8 and 15.6mm damper plates, 1/10 differential mount. Including strong packaging for transport.
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and a 2.0 mm Allen bit.
Oils - Shock " Differential
MIBO Racing Oil set for 1/10 Onroad shock absorbers/differential incl. bags
MIBO
MB-8002
A set of silicone oils for shock absorbers and differential in viscosities most used for on-road racing. Including a practical nylon bag.
A tire grinder for easy removal of the center seam on new RC car tires. Power supply 7.2-12V (2S LiPo, 12V mains supply), XT-60 connector, cable with G4 connectors is included in the package.
Rear reinforcement for 1/10 on-road bodywork.
MIBO file with light carbon handle and round tip. Black handle.
MIBO lightweight black carbon handle with 3mm diameter hole. Suitable for 1.5mm and 2.0mm hex, file tip and other bits with 3mm diameter.
MIBO lightweight black carbon handle with 4mm diameter hole. Suitable for 3.0mm hex and other bits with 4mm diameter.
The set contains black screwdrivers with a carbon handle in sizes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket).
The set includes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket) black screwdrivers with a carbon handle, and an aluminum stand for 6 screwdrivers, 4 electric screwdriver bits and a mobile phone. Including compartments for storing parts, gauge w
Side reinforcement for 1/10 on-road bodywork.
MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
complete wheels
CARTEN glued Intermedium rubber 26mm on black 6 p. discs, 0mm OFFset, 4 pcs.
CARTEN
NHA487
complete wheels
CARTEN glued Intermedium rubber 26mm on silver 6 p. discs, 0mm OFFset, 4 pcs.
CARTEN
NHA488
complete wheels
CARTEN glued Rally tires 26mm on silver 6 p. discs, 0mm OFFset, 4 pcs.
CARTEN
NHA486
complete wheels
CARTEN glued slick rubber 26mm on black 6 spokes. discs, 0mm OFFset, 4 pcs.
CARTEN
NHA489
complete wheels
CARTEN glued slick rubber 26mm on silver 6 p. discs, 0mm OFFset, 4 pcs.
CARTEN
NHA490
The clear body for TC models with front drive in 1/10 scale is covered with a protective film, made of high quality polycarbonate, the package includes stickers.
The clear body for TC models with front drive in 1/10 scale is covered with a protective foil, made of high quality polycarbonate, the package contains stickers.
The clear body for rally models in 1/10 scale is covered with protective foil, made of high quality polycarbonate, the package includes stickers.
The clear body for rally models in 1/10 scale is covered with protective foil, made of high quality Lexan. The package contains stickers, window masks, lexan parabolas and a pre-cut wing including mounting material.
Clear body for TC FRONTI 1/10 190mm category
Clear body for the category TC FRONTI 1/10 190mm
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programovatelný voděodolný bezsenzorový střídavý regulátor pro modely aut. Pro napájení 2S - 3S LiPo, konektor XT60.
Very powerful and very fast programmable digital low-profile servo 57g with AC (brushless) motor with steel gears and wide range of supply voltage 4.8-8.4V, 2xBB, ideal for off-road 1:10 RC cars. Thrust 17.0kg.cm, speed 0.090s/60° at 6.0
Standard LOW PROFILE servo with DC motor and metal gears, 2x ball bearing, 5.5/7.0kg at 4.8/6.0V and 0.19/0.15s at 4.8/6.0V, weight 46.0g , 40.8x20.2x31.7mm. Operating voltage 4.8 - 6.0V.
Digital HiVolt standard servo with Brushless motor and metal gears.
Programmable digital HiVolt standard servo with Brushless (AC) motor and metal gears.
Digital HiVolt standard servo with Coreless motor and metal gears.
Programmable digital HiVolt standard servo with Coreless motor and metal gears.
Programmable digital HiVolt LowProfile servo with Coreless motor and metal gears.
Strong and extremely fast programmable digital low profile servo 57g with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 road RC cars (Modified, Stock, FWD, Formula categories). Thrust 12.0kg.cm, speed 0.074s/60°
Strong and very fast programmable digital low-profile 48g servo with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 road RC cars (Modified, Stock, FWD, Formula categories). Thrust 10.0kg.cm, speed 0.105s/60°at
Strong and extremely fast waterproof programmable digital low-profile 57g servo with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 road RC cars (Modified, Stock, FWD, Formula categories). Thrust 12.0 kg.cm, speed
Digital programmable HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 12.8/15.6kg at 6.0/7.4V and 0.09/0.11s at 6.0/7.4V, weight 53.0g, 40.2x20.5x26.0mm. Operating voltage 4.8 - 8.4V.
Digital Low Profile standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 8.0/10.0kg at 4.8/6.0V and 0.10/0.076s at 4.8/6.0V, weight 48.0g, 40.8x20.2x25.4mm. Operating voltage 4.8 - 6.0V.
Digital
SB-2267SG BRUSHLESS HiVolt Digital Servo - LOW PROFILE (32kg-0.065s/60°)
SAVOX
SAVOX-SB2267SG
Digital Low Profile standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 18.0/25.0/32.0kg at 6.0/7.4/8.4V and 0.10/0.08/0.065s on 6.0/7.4/8.4V, weight 57.0g, 40.3x20.2x25.4mm. Operating voltage 4.8 - 8.4V.
Digital Low profile servo with Coreless motor and metal gears, 2x ball bearing, 7.0/9.0kg at 4.8/6.0V and 0.10/0.09s at 4.8/6.0V, weight 44.5g, 40.8x20.2x25.4mm. Operating voltage 4.8 - 6.0V.
Digital Low profile servo with Coreless motor and metal gears, 2x ball bearing, 4.5/7.0kg at 4.8/6.0V and 0.08/0.07s at 4.8/6.0V, weight 44.5g, 40.8x20.2x25.4mm. Operating voltage 4.8 - 6.0V.
Digital Hi-Volt mini servo with coreless motor and metal gears, 2x ball bearing, 5.0/8.0/10.0kg at 6.0/7.4/8.4V and 0.11/0.095/0.085s per 6.0/7.4/8.4V, weight 30g, 35.0x15x26.7mm. Operating voltage 4.8 - 8.4V.
Digital Low profile HiVolt standard servo with Coreless motor and metal gears, 2x ball bearing, 12.0/15.0kg at 6.0/7.4V and 0.11/0.085s at 6.0/7.4V, weight 46.0g, 40.8x20.2x25.4mm. Operating voltage 4.8 - 8.4V.
1/10 scale racing chassis kit with 4x4 drive and aluminum chassis.
1/10 scale racing chassis kit with 4x4 drive and carbon plates.
1/10 scale racing chassis kit with 4x4 drive and carbon chassis.