Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek

SWORKz S35-4E EVO 1/8 PRO 4WD Off-Road Racing Buggy kit

SW910042
SWorkz
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
More info
In stock - main warehouse: 1 pcs
Recommended retail price
685.71 €
Your price with VAT
()
566.70 €
Price without VAT
566.70 €

  • Did you find a better price?
  • Did you find a better price?

    * Required fields

    We will reply as soon as possible, usually within a few hours.

    By submitting the form you agree to the processing of your personal data (read)

     

     

    Express delivery

     

    Large selection of carriers

     

    Satisfaction guarantee

     

    The S35-4e EVO is a design evolution of the S35-4E Euros Champion model.

    Following on from the successful SWORKz S35-4E 1/8 Electric Buggy chassis, the new S35-4e EVO is designed for a higher level of racing products.
    The new geometry from the European Champion Edition rebuild kit provides optimized cornering speed compared to easier control and maximum traction.
    The S35-4e EVO features a hard-anodized and lightweight T7075 aluminum chassis with a new short-wheelbase design that has been long-term tested by our factory pilots to guarantee the best balance of front and rear suspension speeds.
    Standard HET differentials are included to provide an optional high engine density gear system.
    The new S35-4e EVO comes with an all new Lay-Down Type Steering Bellcrank servo saver . Thanks to this new Ackerman design, the driver feels in complete control of the S35-4e EVO.

    The standard equipment of the SWORKz S35-4e EVO includes an Arched-Bridge-System and a damper system with a higher capacity. This is a big step for the S35-4e EVO, this design makes the car faster and more stable.
    The kit includes special BBS piston and oil seal parts tested by World Team riders during the race. They are made on a high-precision plastic press.
    Also included are specially made durable suspension material parts such as inserts that our team riders used and felt instantly more confident.
    The center chassis layout is a completely new design for the S35-4e EVO. Provides two ways to set up the LiPo kit. The standard 2S pack (or 2S shorty) can be used in the SADDLE PACK position for a lower center of gravity. And one unit of 4S standard set (or shorty) can also be placed in the side position.
    There are many other small changes and clever ideas in the new SWORKz S35-4e EVO, it is the result of evolution that the whole team has been working on and that makes the car a real winner.
    The secret to a modern racing car is the ability to customize the settings for each track for top drivers, but also have a standard setting that works on most tracks for hobby drivers. And your SWORKz S35-4e EVO has these two features in perfection.

    Features of the S35-4e EVO kit

    • T7075 Hard Anodized Lightweight Aluminum Chassis (New)
    • Short chassis design (new)
    • Higher shock mounts/antlers (new)
    • Longer damper bodies (new)
    • Shorter damper pistons
    • S35 series BBS six-link shock absorbers (new)
    • Shorter front shock absorber springs
    • SWORKz 1/8 BBS Precision Plastic Damper Piston (New)
    • Fixed shock absorber spring holder
    • 3mm updated rear shock studs
    • Ackerman plate (new)
    • Control system (new)
    • Servo Saver Aluminum Part (New)
    • Servo Saver board (new)
    • Servo Saver Post Locking Design (New)
    • Steering ball joints (new)
    • Steering knuckle plates (new)
    • Updated Tip Insert Plates with Square Inserts (New)
    • F/F and R/F Intensity aluminum narrow bottom plates (new)
    • All new chassis center layout design (New)
    • Easy to replace motor mounting plate (new)
    • Brand New Power Steering Bracket (New)
    • Completely new design of the RC cabinet and the Regulator (New)
    • Brand New Battery Cover (New)
    • Lightweight wing holder
    • SWORKz S35-4 Series Rear Lower Arm Kit with Arch Bridge System (New)
    • Composite rear hubs with carbon plates
    • Multi-adjustable ball system for rear upper arms
    • Anti-lock screws for dampers
    • Aerodynamically optimized lexan clear body
    • Including 3 HET differentials
    • Including 2 front chassis braces
    • Including black competition damper springs
    • Adjustable wing position
    • Adjustable wing angle
    • Multiple weight balance positions
    • Stronger bottom stop area
    • Optimized composite material
    • Aluminum parts made of T7075 material

    Specifications

    • Length: 510 mm
    • Width: 308 mm
    • Height: 220 mm
    • Ground clearance: 65 mm
    • Wheelbase: 325-330 mm
    • Wheel track: L: 304 mm/Z: 306 mm
    • Gear ratio: Center: 46/15z, R/Z: 43/13z
    • Weight: 3680g (ready to race)

    The model does not include: Servo, Regulator, E-Motor, Receiver, LiPo set 2x2S or 1x 4S, Tires, Discs. The body is unpainted.
    Obrázek
    Last items in stock
    Module 1.0M

    15 teeth pinion (module M1)

    RUDDOG
    RP-0035
    Steel pinion with worm for 1.5mm Allen screwdriver and 5mm motor shaft
    Obrázek
    Last items in stock
    Module 1.0M

    16 teeth pinion (module M1)

    RUDDOG
    RP-0036
    Steel pinion with worm for 1.5mm Allen screwdriver and 5mm motor shaft
    Obrázek
    Last items in stock
    Module 1.0M

    HSS Steel M 1.0, 13 teeth

    Ultimate Racing
    UR4310-13
    Steel pinion with drilling for motor shaft 5mm
    Obrázek
    Last items in stock
    Module 1.0M

    HSS Steel M 1.0, 15 teeth

    Ultimate Racing
    UR4310-15
    Steel pinion with bore for 5mm motor shaft
    Obrázek
    Last items in stock
    Module 1.0M

    HSS Steel M 1.0, 16 teeth

    Ultimate Racing
    UR4310-16
    Steel pinion with drill for motor shaft 5mm
    Obrázek
    Last items in stock
    Module 1.0M

    HSS Steel M 1.0, 17 teeth

    Ultimate Racing
    UR4310-17
    Steel pinion with drilling for motor shaft 5mm
    Obrázek
    Last items in stock
    Module 1.0M

    HSS Steel M 1.0, 18 teeth

    Ultimate Racing
    UR4310-18
    Steel pinion with bore for 5mm motor shaft
    metric

    MIBO Allen screwdriver 1.5mm

    MIBO
    MB-7511
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    metric

    MIBO Allen screwdriver 2.0mm

    MIBO
    MB-7512
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    metric

    MIBO Allen screwdriver 3.0mm

    MIBO
    MB-7513
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    Other

    MIBO Aluminum tool stand

    MIBO
    MB-7501
    MIBO aluminum stand for 6 pcs screwdrivers, 4 pcs electric screwdriver bits and mobile phone. Including compartments for storing parts, a screw gauge and holes for soldering XT60 and 2, 3.5, 4 and 5mm bullet connectors.
    Springs and dampers

    MIBO Electric Bubble Remover - 1/10 & 1/8 Offroad

    MIBO
    MB-7202
    Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 15.6 and 19mm shock absorber plates, 1/10 and 1/8 differential mount. Including strong packaging for transport.
    Springs and dampers

    MIBO Electric Bubble Remover - 1/10 Onroad & Offroad

    MIBO
    MB-7201
    Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 14.8 and 15.6mm damper plates, 1/10 differential mount. Including strong packaging for transport.
    Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and 1.5mm, 2.0mm, 5.5mm and 7.0mm bits.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and a 2.0 mm Allen bit.
    Obrázek
    Last items in stock
    MIBO lightweight black carbon handle with 3mm diameter hole. Suitable for 1.5mm and 2.0mm hex, file tip and other bits with 3mm diameter.
    MIBO lightweight black carbon handle with 4mm diameter hole. Suitable for 3.0mm hex and other bits with 4mm diameter.
    Other

    MIBO Screwdriver set

    MIBO
    MB-7802
    The set contains black screwdrivers with a carbon handle in sizes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket).
    Obrázek Obrázek 2
    Last items in stock
    The set includes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket) black screwdrivers with a carbon handle, and an aluminum stand for 6 screwdrivers, 4 electric screwdriver bits and a mobile phone. Including compartments for storing parts, gauge w
    Socket

    MIBO Socket screwdriver 5.5mm

    MIBO
    MB-7611
    MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    Socket

    MIBO Socket screwdriver 7.0mm

    MIBO
    MB-7612
    MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    Obrázek
    Last items in stock
    Module 1.0M

    Pinion 17 teeth (module M1)

    RUDDOG
    RP-0037
    Steel pinion with worm for 1.5mm Allen screwdriver and 5mm motor shaft
    Obrázek Obrázek 2
    Last items in stock
    SWORKz

    SWORKz antenna caps, 3 pcs.

    SWorkz
    SW420010
    Obrázek Obrázek 2
    Last items in stock
    SWORKz

    SWORKz servo spring, 1 pc.

    SWorkz
    SW115004A
    complete wheels

    B-PIRATE SOFT 1/8, black spoke discs 17mm hex, 2 pcs

    Louise RC
    L-T3126SB
    Complete wheels for 1/8 buggies. Tires suitable for dry and wet conditions, for hard and dusty clay and similar surfaces. Discs for 17mm hex drivers.
    Obrázek Obrázek 2
    Last items in stock
    buggy

    Vision clear body - SWORKz S35-3E / S35-4E pre-cut

    Bittydesign
    VIS-SWKS35-3E
    The clear body for the OFF ROAD SWORKz S35-3E / S35-4E model has improved flow to achieve higher speed and is covered with a protective film, made of high quality 1mm polycarbonate (lexan), the package includes camouflage stickers including stickers....
    Obrázek Obrázek 2
    Last items in stock
    Switched stabilized power supply 50A with LCD display and adjustable output voltage 15-30V / 0-50A. Max. power 1200W. Quadruple output terminals (3x with switch), double USB power socket max. 5V / 2A. Weight 3.08kg.
    stabilized power

    eFuel 200W / 17A switching power supply 12 V

    SKY RC
    3SK200025-5
    Small switched stabilized power supply 12V / 17 A. Max. power 200 W. Dimensions: 112x71x40,3mm, weight 380g.
    stabilized power

    eFuel 540W / 30A switching power supply 12-18 V

    SKY RC
    3SK2005
    Switched stabilized power supply 30 A with LCD display and adjustable output voltage 12-18 V / 0-30A. Max. power 540 W. Dual output sockets, double USB power socket max. 5V / 1A. Dimensions: 218x139x59.5mm, weight 1.62 kg.
    230 +12

    iSDT charger K4

    iSDT
    ISDT1002
    Powerful two-channel quick charger with balancers for 1-18 cells. NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, (1–7S) LiHV, ULiHV, 2–28V Pb current 0.2–20 A (max. 2x200 W with mains supply or 2x600 W with direct current supply). Discharge 2x 0.2–3.0...
    12V

    iSDT charger P10

    iSDT
    ISDT1004
    Miniature two-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–20V Pb current 2x 0.2–10 A (max. 2x250 W). Power supply 10–30 V. Internal resistance measurement, USB-C port for update.
    12V

    iSDT charger P30

    iSDT
    ISDT1005
    High-performance two-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, 1–7Article LiHV / ULiHV, 2–24V Pb current 0.2–30 A (max. 1000 W one channel, max. 1500 W whole charger); discharge 0.2–3.0 A (max....
    12V

    iSDT charger Q8 Max

    iSDT
    ISDT1009
    High-performance miniature quick charger with balancer for 1-16 cells NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, 1-7 cells LiHV, 2-24V Pb current 0.2-30A (max. 1000W); discharge 0.2-3.0A (max. 30W). Power supply 10-34 V. Internal resistance...
    stabilized power

    iSDT SP2417 power supply 24V / 400W

    iSDT
    ISDT1014
    Switching stabilized power supply 24V / 17 A. Max. power 400 W. 2x power / charging output USB 2.0 5V / 2A for smartphones, tablets, etc. Dimensions: 180x63x100 mm, weight 1.0 kg.
    stabilized power

    iSDT SP2425 power supply 24V / 600W

    iSDT
    ISDT1016
    Switched stabilized power supply 24V / 25 A. Max. power 600 W. 2x power / charging output USB 2.0 5V / 2A for smartphones, tablets, etc. Dimensions: 221x63x100 mm, weight 1.4 kg.
    stabilized power

    iSDT SP3060

    iSDT
    ISDT1017
    High-performance switching stabilized power supply 24V / 60 A. Max. power 1800 W. Dimensions: 116x111x258 mm, weight 3.2 kg.
    Two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/ LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains power supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply 10-30...
    Dual-channel quick charger with balancers for 1-16 cells NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply...
    Obrázek Obrázek 2
    • New
    Miniature two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV/ULiHV, 2-20V Pb current 0.2-10 A (max. 2x250 W or 1x400 W/0.2-16 A in parallel mode). Power supply 10-30 V. Measurement of internal...
    Two-channel fast charger with balancers for 1-15 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2-20V Pb current 0.1-20A (max. 2x200 W). Discharge 0.1-5.0A (max. 2x25 W). Power supply 10-30 V/230 V. Touch screen, internal resistance measurement, USB...
    230 +12

    SKY RC D200 Neo charger 2x 400W

    SKY RC
    3SK10196
    Two-channel fast charger with balancers for 4-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/ LiHV, 6/12/24V Pb and maintenance-free Pb AGM with a current of 0.1-20A (max. 2x400W) . Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V/230 V. Measurement...
    230 +12

    SKY RC D260 charger 2x130W

    SKY RC
    3SK10157
    Two-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe / LiHV, 2-20V Pb and maintenance-free Pb AGM with 0.1-14A current (max. 2x130W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V. Measurement...
    230 +12

    SKY RC T1000 Maestro 1000W

    SKY RC
    3SK10182
    Two-channel fast charger with balancers for 4-15 items NiCd/NiMH, 1-6 items Li-poly/Li-ion/Li-Fe/ LiHV, 6/12/24V Pb current 0.1-20A (total max. 1000W /450W from the mains). Discharge 0.1-2.0A (max. 2x10W, 1x350W with external discharger). Power supply...
    230 +12

    SKY RC T200 charger 2x100W

    SKY RC
    3SK10155
    Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
    230 +12

    SKY RC T400Q charger 4x100W

    SKY RC
    3SK10189
    Four-channel fast charger with balancers for 1-15 cells NiCd/NiMH, 1-6 cells Li-poly/Li-ion/Li-Fe/ LiHV, 2-20V Pb and maintenance-free Pb AGM with a current of 0.1-12A (max. 4x100W). Discharge 0.1-2.0A (max. 4x10W). Power supply 12 V/230 V. Measurement...
    Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry 10-channel computer steering wheel 2.4GHz RC kit for racing model cars and boats. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40 models +
    Futaba T-FHSS Telemetry/S-FHSS/FHSS 4-Channel Computerized RC Kit for Competition Model Cars and Boats. 2 lever controls, 4 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With R304SB...
    Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
    Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
    Obrázek Obrázek 2
    Last items in stock
    Sport

    M-17 2.4GHz with RX-493i receiver

    SANWA
    S101A32483A
    Four Channel Steering Wheel RC Kit 2.4GHz FHSS. Set includes: M17 transmitter, RX-493i receiver.
    Hobby

    MT-R 2.4GHz with RX-493i receiver

    SANWA
    S101A32773A
    4-channel telemetry kit with FHSS-5 transmission.
    Hobby

    RC8X transmitter with R8FG receiver

    RadioLink
    1RL0120
    Eight-channel FHSS 2.4GHz steering wheel RC kit for car and boat models. 4 digital trims, rotary knob, 5 pushbutton switches assignable for channels 3-8 or mixes. Memory for 200 models, settings for mixes, double deflections, endpoints, subtrims, expo
    Obrázek Obrázek 2
    Last items in stock
    Hobby

    Falcon 8 V2 controller

    NOSRAM
    N90881
    Programmable AC regulator for car models with forward / brake / reverse function. Constant current 600A, power supply 6-16NC / 2-6 LiPO cells, weight ?? g, BEC 6V / 6A, Dimensions: 55 x 40x 24 mm.
    Obrázek
    Last items in stock
    Hobby

    iX8 V2 controller

    LRP Electronic
    L80881
    Programmable AC-controller for car models with forward / brake / reverse function. Continuous current 600A, power 6-16NC / 2-6 LiPO cells, weight 62g, BEC 6V / 6A, Dimensions: 55 x 40 x 24 mm.
    Obrázek Obrázek 2
    Last items in stock
    The Team Corally REVOC PRO 160 regulator is designed for 1:8 RC car models. Compatible with both sensor and sensorless AC motors. The regulator is widely adjustable, the aluminum box not only looks great, but effectively dissipates heat from the...
    Obrázek
    Last items in stock
    The Team Corally REVOX II 160 regulator is tuned for today's high-performance AC motors. The controller offers settings for all functions to guarantee the best functionality and performance. The components of the REVOX II 160 regulator ensure the...
    Sport

    XERUN XR8 PLUS - black - regulator

    HOBBYWING
    HW30113300
    Electronic AC regulator (ESC) of the XERUN series with a maximum peak current of up to 950 A, with a built-in BEC circuit and programmable via WiFi. Ideal for 1/8 scale models of all categories.
    Sport

    XERUN XR8 PLUS G2S - black - regulator

    HOBBYWING car
    HW30113304
    Electronic AC regulator (ESC) of the XERUN series with a maximum peak current of up to 1080 A, with a built-in BEC circuit and programmable via the HW OTA module (BT). Ideal for 1/8 scale models of all categories.
    Sport

    XERUN XR8 Pro G3 200A controller

    HOBBYWING car
    HW30113400
    Electronic AC regulator of the XERUN 200A series (peak up to 1080 A), with built-in BEC circuit 6/7.4V/6A and programmable using LCD prog. box G2 or OTA programmer. Ideal for 1/8 scale models of all categories and 1/10 Short course and monster trucks. On
    Sport

    XERUN XR8 SCT - black - regulator

    HOBBYWING
    HW30113301
    Electronic alternating speed controller (ESC) for sensor motors, with BEC circuit, suitable for SCT / Truck / Monster categories in 1/10 scale and buggy / passenger cars in 1/8 scale.
    Digital

    Futaba HPS-CB500 (25.5kg 0.06s / 60 °)

    FUTABA
    FUT5102687
    Very powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for car models. Support for S.BUS, S.BUS2 and SR mode. Power supply 5.0-8.4V. Thrust 20.6kg.cm, speed 0.07s / 60 ° at 6.0V, thrust 25.5kg.cm, speed 0.06s...
    Digital

    Futaba HPS-CB701 (49kg 0.075s/60°)

    FUTABA
    FUT5102698
    Monstrously powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for 1:8 cars. Support S.BUS, S.BUS2, SR and UR mode. Power supply 5.0-8.4V. Thrust 42kg.cm, speed 0.09s/60° at 6.0V, thrust 49kg.cm, speed...
    Very strong and fast programmable digital standard servo 83g with AC (brushless) motor, with steel gears and a wide range of supply voltage 4.8-8.4V, 3xBB, ideal for large model airplanes, RC cars 1:8 and 1:10 etc. .Thrust 28.0kg.cm, speed 0,
    Digital

    GO-1280MG (0.085s/60°, 40kg.cm)

    Kavan
    KAV20.1280MG
    Very strong and fast programmable digital standard servo 79g with AC (brushless) motor, with magnetic encoder, with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for 1:8 and 1:10 off-road RC cars etc. Thrust 27.0kg.cm,
    Extremely powerful and fast programmable waterproof and dustproof (IP67) digital standard servo 83g with AC (brushless) motor, with magnetic encoder, with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for off-road RC cars
    Obrázek
    Last items in stock
    Digital programmable HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 17.9 / 21.1kg at 6.0 / 7.4V and 0.11 / 0.14s at 6.0 / 7.4V, weight 72.0g, 40.5x20.5x38.7mm. Operating voltage 4.8 - 8.4V.
    Obrázek
    Last items in stock
    Digital programmable HiVolt standard servo with Brushless motor and metal gears, 2x ball bearing, 14.0 / 17.3kg at 6.0 / 7.4V and 0.09 / 0.11s at 6.0 / 7.4V , weight 72.0g, 40.5x20.5x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital Low Profile standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 18.0/25.0/32.0kg at 6.0/7.4/8.4V and 0.10/0.08/0.065s on 6.0/7.4/8.4V, weight 57.0g, 40.3x20.2x25.4mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 25.0/32.0/45kg at 6.0/7.4/8.4V and 0.15/0.12/0.11s on 6.0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 15.0/20.0/25.0kg at 6.0/7.4/8.4V and 0.085/0.065/0.055s at 6.0/ 7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 23.0/28.0/35.0kg at 6.0/7.4/8.4V and 0.12/0.095/0.085s at 6, 0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Obrázek
    Last items in stock
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 20.0/25.0/30.0kg at 6.0/7.4/8.4V and 0.10/0.08/0.07s for 6.0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 40.0/50.0/60kg at 6.0/7.4/8.4V and 0.17/0.14/0.12s on 6.0/7.4/8.4V, weight 83.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 45.0/55.0/70kg at 6.0/7.4/8.4V and 0.16/0.13/0.11s on 6.0/7.4/8.4V, weight 81.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 27.0/36.0/50kg at 6.0/7.4/8.4V and 0.085/0.07/0.055s at 6.0 /7.4/8.4V, weight 79.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 50/65/75kg at 6.0/7.4/8.4V and 0.16/0.13/0.11s at 6, 0/7.4/8.4V, weight 72.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 30.0/35.0kg at 7.4/8.4V and 0.08/0.07s at 7.4/8.4V, weight 63.0g , 40.3x20.2x37.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 35.0/40.0kg at 7.4/8.4V and 0.10/0.09s at 7.4/8.4V, weight 63.0g , 40.3x20.2x37.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Coreless motor and metal gears, 3x ball bearing, 38.0/45.0/55kg at 6.0/7.4/8.4V and 0.17/0.14/0.12s at 6.0 /7.4/8.4V, weight 76.0g, 40.3x20.2x38.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt WATERPROOF standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 45.0/55.0/70.0kg at 6.0/7.4/8.4V and 0.16/0.13/0 ,11s at 6.0/7.4/8.4V, weight 81.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Sport

    COMBO XERUN XR8 Plus G2S-4268-1900KV

    HOBBYWING car
    HW38020500
    Top Combo set designed for 1/8 Off-road cars containing XERUN XR8 Plus G2S controller and XERUN 4268 SD, 1900Kv - G3 motor. Power supply 2-6S.
    Sport

    COMBO XERUN XR8 Plus G2S-4268-2000KV

    HOBBYWING car
    HW38020502
    Top Combo set intended for 1/8 On-road cars containing XERUN XR8 Plus G2S controller and XERUN 4268 SD engine, 2000Kv - G3. Power supply 2-6S.
    Sport

    COMBO XERUN XR8 Plus G2S-4268-2200KV

    HOBBYWING car
    HW38020501
    Top Combo set designed for 1/8 Off-road vehicles including XERUN XR8 Plus G2S controller and XERUN 4268 SD, 2200Kv - G3 motor. Power supply 2-6S.
    Sport

    COMBO XR8 Pro G3/4268 G3 1900Kv

    HOBBYWING car
    HW38020432
    Combo of the top XERUN XR8 PRO G3 AC controller and the XERUN 4268SD G3 1900KV sensor motor. Ideal for 1:8 off-road vehicles powered by 2-4S LiPo.
    Sport

    COMBO XR8 Pro G3/4268 G3 2200Kv

    HOBBYWING car
    HW38020433
    Combo of top-of-the-line XERUN XR8 PRO G3 AC controller and XERUN 4268SD G3 2200KV sensor motor. Ideal for 1:8 off-road vehicles powered by 2-4S LiPo.
    Obrázek Obrázek 2
    Last items in stock
    AC motor including fan for 1/8 RC models and the like. Operating voltage: 2S-6S / 7,4-22,2V, body length 69,00mm, length including fan: 80mm, diameter: 40,0mm, weight: 307g without fan and 321g,
    Obrázek Obrázek 2
    Last items in stock
    Hobby

    X44 MODIFIED 1500 kV

    LRP Electronic
    L520800
    AC sensor electric motor for 1/8 car models, KV1500 rpm per V, power supply Nixx 6-18ch./Lixx 2-6s, shaft 5.0 mm, weight 345g, Motor diameter: 41.5mm, Motor length: 68mm.
    Comba

    XERUN 4268 SD, 1900Kv - G3 - black

    HOBBYWING car
    HW30401906
    Reciprocating XERUN 4268 SD motor for use in 1/8th Buggy and Truggy. Power supply 2-6S.
    Comba

    XERUN 4268 SD, 2000Kv - G3 - black

    HOBBYWING car
    HW30401908
    AC XERUN 4268 SD motor, use for 1/8th Touring Cars/SCTs. 2-6S power supply.
    Comba

    XERUN 4268 SD, 2200Kv - G3 - black

    HOBBYWING car
    HW30401907
    Reciprocating XERUN 4268 SD motor for use in 1/8th Buggy and Truggy. Power supply 2-6S.
    The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    The latest generation of the LRP battery of 2023. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
    The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    Obrázek Obrázek 2
    Last items in stock
    The latest generation of the LRP battery from 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher output with less electrical resistance between the cells, i.e. and...
    Obrázek Obrázek 2
    Last items in stock
    The latest generation of the LRP battery from 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher output with less electrical resistance between the cells, i.e. and...
    The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    The latest generation of NOSRAM batteries by 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    Obrázek
    Last items in stock
    The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    The latest generation of NOSRAM batteries by 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    The latest generation NOSRAM battery of 2022/2023. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
    The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
    The latest generation LRP battery of 2023/2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
    The latest generation NOSRAM battery of 2023/2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with higher performance with less electrical resistance between the cells, i.e....
    Obrázek
    Last items in stock
    The latest generation of NOSRAM battery in 2020. "GRAPHENE 4" technology means that the batteries are lighter, more durable for storage, with shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
    The latest generation of the LRP battery of 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
    The latest generation of NOSRAM battery in 2024. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with shorter charging time, with higher performance with less electrical resistance between the cells, i.e. and...
    The new 2023/2024 RUDDOG Racing LiPo kits are made from the latest generation of high quality Hi-Volt silicon-graphene cells. This made it possible to achieve further improvements in terms of internal resistance and capacitance. This is reflected in a...
    The new 2023/2024 RUDDOG Racing LiPo kits are made from the latest generation of high quality Hi-Volt silicon-graphene cells. This made it possible to achieve further improvements in terms of internal resistance and capacitance. This is reflected in a...
    The new 2023/2024 RUDDOG Racing LiPo kits are made from the latest generation of high quality Hi-Volt silicon-graphene cells. This made it possible to achieve further improvements in terms of internal resistance and capacitance. This is reflected in a...
    Obrázek
    Last items in stock
    Team Corally VOLTAX HiVolt version for real racers with 6500mAh capacity in Stick Hardcase version. Dimensions: 138x47x48mm, charging current max. 3C/19.5Amp., G5 power connector, XH-4S balance connector, Weight: 549-595g
    Obrázek
    Last items in stock
    Team Corally VOLTAX HiVolt version for real racers with 6400mAh capacity in LCG Stick Hardcase version. Dimensions: 138.5x47x22mm, charging current max. 3C/19.2Amp., G4 power connector, G2 balance connector, Weight: 262-284g
    Team Corally VOLTAX HiVolt version for real racers with 6500mAh capacity in Stick Hardcase version. Dimensions: 138x47x48mm, charging current max. 3C/19.5Amp., G5 power connector, XH-4S balance connector, Weight: 530-574g
    Obrázek
    Last items in stock
    Team Corally VOLTAX HiVolt version for real racers with 8000mAh capacity in Stick Hardcase version. Dimensions: 138.5x47x25mm, charging current max. 3C/24Amp., G4 power connector, G2 balance connector, Weight: 300-325g
    Team Corally X-CELERATED version for beginners and recreational racers with a capacity of 7200mAh in Stick Hardcase version. Dimensions: 138.6x46.8x25mm, charging current max. 3C/21Amp., G4 power connector, G2 balance connector, Weight: 295g

    Customers who bought this product also bought: