KAVAN C100 Duo Air charger with balancer 2x 500W

The small two-channel charger KAVAN C100 Duo 2x500W was designed with the aim of offering an intelligent charger with high performance with power supply from the network and car battery and very simple and clear operation. The C100 Duo allows you to charge and discharge common cell types (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-ion, LiFe, Pb), and is also equipped with built-in six-channel balancers that ensure safe charging of lithium batteries. The charger is equipped with a color LCD display and programming buttons that provide you with the possibility of comfortable and very clear parameter setting, control and monitoring of the charging/discharging process. Of course, Czech is also not missing among the optional menu languages.

In addition to the compact, palm-sized design and intuitive operation, it is worth special mention:

• program for new types of "high-voltage" lithium batteries LiHV with a terminal voltage for charging up to 4.35 V and ULiHV and with a terminal voltage of 4.45 V
• powerful balancer with a current of up to 1.5 A
• possibility of synchronous operation of both channels for charging two identical accumulators or parallel charging of one accumulator with a power of up to 800 W
• adjustable terminal voltage for charging and discharging for lithium batteries (allows gentler charging, which is liked by aviators, or, on the contrary, brutal overcharging, which is adored by "car enthusiasts")
• adjustable final charging voltage for lead-acid batteries (1.90-2.45 V; allows charging of all types of lead-acid batteries)
• the possibility of communication and starting charging/discharging without the need to set up the charger in cooperation with iSDT Smart modules for batteries (they store battery data and preset parameters for charging with the help of the BattAir application) connected via Bluetooth; the charger can work independently with a battery with a preset Smart module or under the "supervision" of a smartphone with the BattAir application (Android and iOS)

Overview of basic functions and parameters

• Mains supply 100-240 V/50-60 Hz
• Power supply 10-30 V DC (XT60 socket)
• For charging and discharging 1 – 16 NiCd/NiMH cells, 1 – 6 Li-ion/Li-poly/Li-Fe/LiHV/ULiHV cells or 2- 24 V lead-acid batteries
• Adjustable charging current (0.2 A - 20.0 A) in each channel (max. 100 W when mains powered, max. 500 W when powered from a car battery or from a powerful stabilized mains source - to fully utilize the power of the charger, it is necessary to the power supply had a voltage higher than 24 V)
• Adjustable discharge current 0.2 A - 1.5 A in each channel
• Max. charging power 1x 800W in parallel charging mode
• Max. power for discharge 2x 15 W, max. 1x 30 W in parallel discharge mode
• Termination of charging using automatic delta-peak for NiCd and NiMH accumulators
• Lithium and Pb batteries are charged using the "constant current/constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable terminal voltage for charging and discharging for lithium and lead-acid batteries
• Three modes for lithium batteries – charge, discharge and storage charge/discharge; all with or without a balancer. And on top of that, the liquidation discharge mode for the safe discharge of the discarded accumulator before it is handed over for recycling
• Channel CH1 can work as a stabilized source with adjustable voltage 2-30 and current 1.0-5.0 A
• Easy firmware update via USB-C port
• Backlit color LCD display with a simple and clear menu and display of parameters during charging/discharging
• Programming buttons for easy and clear setting and control of the charger
• A number of warning messages contribute to safe operation – wrong input voltage, wrong connection, unsuitable battery or its condition, wrong polarity at the output, etc.
• Fan for forced cooling.
• Compact plastic box, small dimensions

The charger is equipped with XT60 output sockets in both channels and universal sockets for JST-XH service connectors allowing direct connection of battery power cables and JST-XH service connectors of 2-6S sets - if you use sets with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect the service connectors of other systems.

The charger set includes: KAVAN C100 Duo charger, instructions.