Shopping Cart
There are no more items in your cart
Dimensions: 86x15x5.4mm, weight 6g.
CH6035 HiVOLT CORELESS Digital servo (35kg-0.14s / 60 °)
SRT-CH6035
SRT
Digital HiVolt standard servo with Coreless motor and metal gears.
Express delivery
Large selection of carriers
Satisfaction guarantee
The latest generation of servos from SRT gives you the performance you need for any use in aircraft, boat, car or robotic "toy" models. They are standard sizes with HV power up to 8.4V, all-metal housing for perfect performance.
Properties
- Ideal for 1/8, 1/5 and 1/6 on-road and off-road (Monster, Truggy, Buggy, Short course)
- Unbelievable efficiency and low power consumption
- 2ms Dead-band
- 25tubed output shaft
SPECIFICATIONS
- Type: Digital
- Bearing: Dual
- Engine type: Coreless
- Transmission type: metal
- Transmission Material: Titanium " Aluminum
- Control system: Pulse width control
- Working Frequency: 1520_s / 330hz
- Operating voltage: DC 6 - 8.4V
- Operating temperature range: -10 to +60 degrees
- Operating speed (6.0V): 0.16s / 60 degrees without load
- Operating speed (7.4V): 0.15s / 60 degrees without load
- Operating speed (8.4V): 0.14s / 60 degrees without load
- Traction Load (6.0v): 30.0kg.cm
- Traction Load (7.4V): 32.0kg.cm
- Tractive load ( 8.4V ): 35.0kg.cm
- Potentiometer drive: direct drive
- Dimensions: 40.7 x 20.5 x 38.5mm
- Weight: 75.0g
- Wire connector length: JR 250 mm
27 Items
New
6969006003511
- -0.39 €
4.1g, 25 teeth for for SRT, SAVÖX, FUTABA, GRAUPNER/SJ, KAVAN servos
- -0.59 €
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos.
- -0.47 €
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 7.0mm, Size from center to first hole: 15mm and second 19mm.
- -0.47 €
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 7.0mm, Size from center to first hole: 15mm and second 19mm.
- -0.47 €
- New
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
- -0.47 €
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
- -0.47 €
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
- -0.47 €
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Center to first hole dimension: 16mm and second 20mm.
- -0.87 €
Last items in stock
levers
FT Alu servo double lever 25 teeth for RC8 Buggy and Truggy throttle / brake
Associated
AE1372
for SAVOX, FUTABA etc.
- -2.01 €
for SAVOX, FUTABA etc.
- -0.82 €
Last items in stock
for SAVOX, FUTABA etc.
- -0.87 €
Last items in stock
for SAVOX, FUTABA etc.
- -0.71 €
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
- -0.71 €
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
- -0.71 €
- Special price
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
- -0.04 €
Last items in stock
- -0.04 €
Last items in stock
- -0.12 €
- -0.15 €
Last items in stock
- -0.59 €
Last items in stock
- -0.99 €
- -0.59 €
- -0.66 €
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of the hole from the servo axis: 25mm.
- -0.51 €
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M2 threads for the use of ball joints. Distance of holes from the servo axis: 32mm; 25.5mm.
- -0.51 €
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 32mm; 25.5mm.
- -0.51 €
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 38mm; 32mm.
- -0.63 €
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 36mm; 42.5mm; 51mm.
- -0.39 €
- -0.39 €
- -0.39 €
3.8g, 25 teeth, 11mm Off-Set, thickness 3.2mm, M3 thread, for SRT, SAVÖX, FUTABA, GRAUPNER/SJ, KAVAN servos
- -0.12 €
Double arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
- -0.12 €
Single-arm universal carbon lever for servos 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
- -0.16 €
One-arm universal carbon lever for servos 66x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
- -0.12 €
Single arm universal arc carbon lever for servos 53x20mm, center hole 9mm. For screwing onto standard plastic servo discs.
Double arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
- -3.30 €
Professional double-sided servo lever with offset for servos with 25-tooth output hexagon (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm
- -0.63 €
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 64mm; 50mm; 38mm.
- -3.14 €
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 89mm; 76.5mm; 63.5mm.
Last items in stock
Lever 20/17 and 14mm double-sided and central drilling diameter 1.6mm
- -0.12 €
Screw for screwing into the thousandth of a standard servo with metal gears for fixing the lever. Hexagon socket head, black. There are 10 pcs in the package.
- -0.75 €
Last items in stock
- -1.19 €
Last items in stock
Replacement for SW330690
- -1.26 €
Last items in stock
- -1.30 €
Last items in stock
levers
SWORKz Uni-Design 2-Lock Aluminum Black Servo Single Arm Lever, 25 Teeth, 1 Pc.
SWorkz
SW33807825
- -1.38 €
Last items in stock
levers
SWORKz Uni-Design 2-locking aluminum black servo double-arm lever, 25 teeth, 1 pc.
SWorkz
SW33807925
- -0.75 €
Last items in stock
- -1.14 €
Last items in stock
- -0.87 €
Titanium / aluminum gears
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - blue
Team Corally
C-00488-B
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - green
Team Corally
C-00488-G
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - red
Team Corally
C-00488-R
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
A 1/10 scale 4WD racing buggy on a chassis with ambitions to win.
Rally 1/10 chassis without all electronics, body.
Last items in stock
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Last items in stock
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Customers who bought this product also bought:
- -3.00 €
Last items in stock
Original complete Traxxas LED lighting for 1:10 4WD Slash RC model car. Easy assembly - replacement of entire parts. High-luminosity diodes are not only effective, but also provide a strong stream of light. Power from the receiver.
- -8.49 €
Last items in stock
Spare part for Traxxas Desert Racer 1: 8: Desert Racer body clear, stickers.
- -0.12 €
Last items in stock
Traxxas spur gear 54 teeth, module 32DP (ie metric module 0.8M).
- -0.41 €
Last items in stock
High battery holder for RC models of Traxxas Rally and Slash cars 1:10. Designed for RC models of Traxxas cars that have a chassis with side storage for batteries (batteries on the side of the chassis
Tap to zoom
