Shopping Cart
There are no more items in your cart
Dimensions: 86x15x5.4mm, weight 6g.
CH635S HiVOLT CORELESS Digital servo (35kg-0.14s/60°)
SRT-CH635S
SRT
Digital HiVolt standard servo with Coreless motor and metal gears.
Express delivery
Large selection of carriers
Satisfaction guarantee
SRT CH635S
HiVOLT CORELESS (coreless motor) CH6035 servo specially designed for 1/10 and 1/8 On and Off-Road models with a reaction speed of up to 0.14s and 35kg/cm thrust/torque. The servo uses a combined metal and composite housing to achieve lower weight, while the CORELESS motor and titanium/steel gears ensure high performance and durability. The low profile servo is equipped with a black 250mm cable with a JR connector.
Newly compatible with ULTRA fast transmission SSR and SXR/SANWA, SR/FUTABA, SUR and SFR.
Properties
- Ideal for 1/10 and 1/8 scale On-road and Off-road (Monster, Truggy, Buggy, Short course)
- Incredible efficiency and low energy consumption
- 2 µsec Dead-band
- 25T output shaft
SPECIFICATIONS
- Type: Digital - HiVOLT
- Bearing: 2BB
- Engine type: Coroless (coreless) engine
- Gearbox type: metal
- Gear material: Titanium & Steel
- Control system: pulse width regulation
- Operating frequency: 1520µs / 330hz
- Operating voltage: DC 6 - 8.4v
- Operating temperature range: -10 to +60 degrees
- Operating speed (6.0V): 0.16s / 60 degrees without load
- Operating speed (7.4V): 0.15s / 60 degrees without load
- Operating speed (8.4V): 0.14s / 60 degrees without load
- Thrust/Torque (6.0v): 30.0kg.cm
- Thrust/Torque (7.4V): 32.0kg.cm
- Thrust/Torque (8.4V): 35.0kg.cm
- Potentiometer drive: direct drive
- Dimensions: 40.7 x 20.5 x 38.5mm
- Weight: 75.0g
- Power cable: JR 250 mm
4 Items
6969006350004
4.1g, 25 teeth for for SRT, SAVÖX, FUTABA, GRAUPNER/SJ, KAVAN servos
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos.
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 7.0mm, Size from center to first hole: 15mm and second 19mm.
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 7.0mm, Size from center to first hole: 15mm and second 19mm.
- New
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Size from center to first hole: 16mm and second 20mm.
Last items in stock
for FUTABA, SAVOX, SRT, HD POWER and similar servos. Offset: 10.8mm, Center to first hole dimension: 16mm and second 20mm.
Last items in stock
levers
FT Alu servo double lever 25 teeth for RC8 Buggy and Truggy throttle / brake
Associated
AE1372
for SAVOX, FUTABA etc.
Last items in stock
for SAVOX, FUTABA etc.
Last items in stock
for SAVOX, FUTABA etc.
for SAVOX, FUTABA etc.
Last items in stock
for SAVOX, FUTABA etc.
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
- Special price
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
Last items in stock
Last items in stock
Last items in stock
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of the hole from the servo axis: 25mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M2 threads for the use of ball joints. Distance of holes from the servo axis: 32mm; 25.5mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 32mm; 25.5mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 38mm; 32mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 36mm; 42.5mm; 51mm.
3.8g, 25 teeth, 11mm Off-Set, thickness 3.2mm, M3 thread, for SRT, SAVÖX, FUTABA, GRAUPNER/SJ, KAVAN servos
Double arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo discs.
Last items in stock
Double arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
Single-arm universal carbon lever for servos 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
One-arm universal carbon lever for servos 66x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
Single arm universal arc carbon lever for servos 53x20mm, center hole 9mm. For screwing onto standard plastic servo discs.
Double arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
Professional double-sided servo lever with offset for servos with 25-tooth output hexagon (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 64mm; 50mm; 38mm.
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 89mm; 76.5mm; 63.5mm.
Screw for screwing into the thousandth of a standard servo with metal gears for fixing the lever. Hexagon socket head, black. There are 10 pcs in the package.
Last items in stock
Last items in stock
Replacement for SW330690
Last items in stock
Last items in stock
levers
SWORKz Uni-Design 2-Lock Aluminum Black Servo Single Arm Lever, 25 Teeth, 1 Pc.
SWorkz
SW33807825
Last items in stock
levers
SWORKz Uni-Design 2-locking aluminum black servo double-arm lever, 25 teeth, 1 pc.
SWorkz
SW33807925
Last items in stock
Last items in stock
Titanium/steel gears
1/10 scale 2WD racing Buggy kit for beginners and advanced racers. Chassis including clear bodywork and wheels, without electronics.
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - blue
Team Corally
C-00488-B
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - green
Team Corally
C-00488-G
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
Field
ASUGA XLR 6S - BUGGY 4WD - PRO ROLLER chassis - without electronics - red
Team Corally
C-00488-R
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
The new BUGGY is 15% larger than the classic 1/8.
Last items in stock
The new BUGGY is 15% larger than the classic 1/8.
A 1/10 scale 4WD racing buggy on a chassis with ambitions to win.
Rally 1/10 chassis without all electronics, body.
Last items in stock
Monster
DEMENTOR XP 6S - Model 2021 1/8 Monster Truck 4WD - RTR - Brushless Power 6S
Team Corally
C-00167
Featuring ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and an aerodynamic racing design, the DEMENTOR is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
Field
KAGAMA XP 6S - 1/8 Monster Truck 4WD - RTR - Brushless Power 6S - green
Team Corally
C-00274-G
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
With its ultra-durable all-metal all-wheel drive, fully independent suspension, racing chassis and aerodynamic racing design, the KAGAMA is the perfect car for anyone looking for massive jumps at terrifying speeds!
Last items in stock
Factory-assembled 1/10 monster truck model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory-assembled 1/10 monster truck model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory-assembled 1/10 monster truck model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Successor to the B7 racing buggy kit with 2WD rear axle drive (engine in front of the rear axle). Model without electronics and RC kit. Specially designed for astroturf, carpet and similar surfaces with high grip.
Last items in stock
Successor to the B7D racing buggy kit with 2WD rear axle drive (engine in front of the rear axle). Model without electronics and RC kit. Specially designed for dirt, clay and similar surfaces with little grip.
Last items in stock
The new generation of 4WD buggy RC10B84 with a separate slip clutch, following on from the innovations of the B7 model.
Last items in stock
The new generation of 4WD buggy RC10B84D, following on from the innovations of the B7 model.
Last items in stock
1/10 scale short course racing truck kit based on the B7 buggy platform.
Last items in stock
Racing RTR Buggy SPIRIT NXT 2.0 4WD with .21 / 3,5ccm Power motor with traction starter
Last items in stock
High-performance Monster truck with 1/8 all-wheel drive. With AC motor MLH-2200KV, speed controller ELH-6S 150A. Metal drivetrain, orange-gray detailed body, plastic mock-up accessories. Included in the 2.4GHz RC kit.
Last items in stock
4WD Monster truck kit in 1:8 scale with clear bodywork. Without combustion engine and electronics.
Last items in stock
Factory assembled model of a 1/8 4WD Short Course truck. Without electronic components.
Last items in stock
Factory assembled model of a 1/8 4WD Short Course truck. Without electronic components.
Last items in stock
Factory assembled model of a 1/8 4WD Short Course truck. Without electronic components.
Last items in stock
Last items in stock
Last items in stock
Last items in stock
- Special price
- On sale
Last items in stock
Last items in stock
Last items in stock
Field
Spirit NXT EVO RR 2.0 Brushless buggy - yellow (incl. LiPo and charger)
HOBBYTECH
IM-1.NXT.RR-2.0-YE-PK
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Plus drive battery and charger.
Last items in stock
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Without drive battery and charger.
Last items in stock
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Plus drive battery and charger.
Last items in stock
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Without drive battery and charger.
Last items in stock
Field
SPIRIT NXT RR BRUSHLESS buggy - orange (incl. LiPo and charger)
HOBBYTECH
IM-1.NXT.RR-RTR-OR.PK
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Plus drive battery and charger.
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Without drive battery and charger.
Last items in stock
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Plus drive battery and charger.
1/8 scale 4WD buggy with 4S AC drive designed and developed in France on the latest platform from HOBBYTECH. Set including electronics, body and wheels. Without drive battery and charger.
Last items in stock
buggy
SWORKz S12-2C EVO LIMITED "Carpet Edition" 1/10 2WD Off Road Racing Buggy For Kits
SWorkz
SW910033CEL
Kit of top 2WD buggy racing chassis including tuning parts. Model without electronics and RC kit.
Last items in stock
buggy
SWORKz S12-2D EVO LIMITED “Dirt Edition” 1/10 2WD Off-Road Racing Buggy PRO Kit
SWorkz
SW910033DEL
Kit of top 2WD buggy racing chassis including tuning parts. Model without electronics and RC kit.
Last items in stock
Kit of a top buggy racing chassis with 2WD drive. Model without electronics and RC kit.
Last items in stock
Top racing buggy with rear axle drive 2WD (engine in front of rear axle). Kit with clear bodywork, without electronics, RC kit and wheels. Specially designed for astroturf, carpet and similar surfaces with high grip.
Last items in stock
Top racing buggy with rear axle drive 2WD (engine in front of rear axle). Kit with clear body, without electronics, RC kit and wheels. Specially designed for dirt, clay, wet astroturf and similar surfaces with little grip.
Last items in stock
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Last items in stock
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Last items in stock
Outreach
SWORKz S35-4 1/8 PRO 4WD Off-Road Racing Buggy Kit + MS 2022 Conversion Kit
SWorkz
SW910035WE
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Last items in stock
Building kit of a high-end buggy racing chassis with 4WD drive. Model without electronics and RC kit.
Last items in stock
Truggy top racing chassis kit with 4WD drive. Model without electronics and RC kit.
Last items in stock
Factory assembled 1/8 2WD buggy model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory assembled 1/8 2WD buggy model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory assembled 1/8 2WD buggy model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory assembled 1/8 2WD buggy model with a unique price/performance ratio. Includes 2.4GHz transmitter/receiver, AC combo with 4S LiPo support and 25kg metal gear servo.
Last items in stock
Factory assembled 1/8 buggy model with a unique price/performance ratio. It includes a 2.4GHz transmitter/receiver, an AC combo with 4S LiPo support, and a 25kg servo with metal gears.
Last items in stock
Factory assembled 1/8 buggy model with a unique price/performance ratio. It includes a 2.4GHz transmitter/receiver, an AC combo with 4S LiPo support, and a 25kg servo with metal gears.
Last items in stock
Factory assembled 1/8 buggy model with a unique price/performance ratio. It includes a 2.4GHz transmitter/receiver, an AC combo with 4S LiPo support, and a 25kg servo with metal gears.
Last items in stock
Fully assembled 1:8 scale Buggy model with all-wheel drive. The model comes with a 2200kV AC motor and waterproof electronics, including a 150A 6S regulator. It includes a 2.4GHz transmitter and receiver.
Last items in stock
Fully assembled 1:8 scale Buggy model with all-wheel drive. The model comes with a 3.5cc internal combustion engine and waterproof electronics. It includes a 2.4GHz transmitter and receiver.
Last items in stock
Fully assembled 1:8 scale 4WD Buggy model. The model comes with a 2200kV brushless motor and waterproof electronics, including a 150A 6S ESC. It includes a 2.4GHz transmitter and receiver. The S version also offers aluminum tuning compared to the...
Last items in stock
Fully assembled 1:8 scale Truggy model with all-wheel drive. The model comes with a 2200kV brushless motor and waterproof electronics, including a 150A 6S ESC. A 2.4GHz transmitter and receiver are included. The S version also offers aluminum tons...
Last items in stock
Fully assembled 1:8 scale Truggy model with all-wheel drive. The model comes with a 2200kV AC motor and waterproof electronics, including a 150A 6S regulator. It includes a 2.4GHz transmitter and receiver.
The 1:8 scale model of the Ford Escort RS Cosworth special with 4WD is powered by a powerful combustion engine and comes in a set including an RC kit operating in the 2.4Ghz band and LED lighting.
Customers who bought this product also bought:
COMBO kit guaranteeing the best performance - EZRUN MAX10 G2 80A series electronic AC regulator, completely waterproof and dustproof with built-in BEC circuit and EZRUN 3652 G3 AC motor, use for 1/10th SCT/Truck/Monster truck.
Tap to zoom
