Charging cable 50cm from XT60 to Futaba, Sanwa, Graupner, JR RX/TX connector
L499251
LRP Electronic
Express delivery
Large selection of carriers
Satisfaction guarantee
This charging cable is 50cm long and comes with XT60 charger connection and Futaba,Sanwa,Graupner,JR RX/TX output connector.
Thanks to the 50cm Silicon-Flex cables and the high-end XT60 connector, this charging cable is perfectly suited for its use.
For protection and reliable operation, these charging cables are equipped with a protective net and a shrink tube on both sides with the LRP logo print.
A range of general purpose charging cables are available with different connectors.
Dimensions: 51x38x20 mm, weight 84g, Connector: JR / Hitec
Dimensions: 84x30x17 mm, weight 91g, Connector: JR / Hitec
Dimensions: 56x31x31 mm, weight 99g, Connector: JR / Hitec
Dimensions: 61x43.5x11mm, weight: 59g, Connector: JR/GRAUPNER. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Capacity: 2000mAh, 4 cells, voltage: 4.8V, weight: 110g, dimensions: 54x30x30mm and connector: JR/HITEC
Capacity: 2000mAh, 4 cells, voltage: 4.8V, weight: 108g, dimensions: 57x53x15mm and connector: JR/HITEC
Tx
4.8V 2000AA ENELOOP Sanyo Tx (Flash 7, LYNX 4S, T6K, T10J, T3PV) 4 pcs. areas
Kavan
KAV33.1061804F
Battery pack 4.8 V NiMH with low self-discharge "tailor-made" for transmitters Hitec Flash 7 and LYNX 4S, Futaba T3PV, T4PM, T7PX, T7XC, T6K, T10J.
Dimensions: 87x43,5x12,5mm, weight: 99g, Connector: JR / GRAUPNER
Capacity: 2000mAh, 5 units, voltage: 6V, weight: 136g, dimensions: 71x53x15mm and connector: JR/HITEC
Capacity: 2000mAh, 5 cells, voltage: 6V, weight: 134g, dimensions: 52x43x27mm and connector: JR/HITEC
Five-cell NiMH battery 6V / 1800 mAh for Futaba transmitters.
Small quick charger with balancer for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with 0.1–8 A current (max. 50 W when powered from the mains, max. 200 W from the car battery). Discharge 0.1–1.0 A (max. 10 W)....
Miniature quick charger with balancer for 1–16 cells. NiCd / NiMH, 1–8 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb current 0.1–20 A (max. 500 W); discharge 0.1–1.5 A (max. 15 W). Power supply 10–34 V. Internal resistance measurement, microUSB...
Dual-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with a current of 0.2–12 A (max. 200 W). Discharge 2x 0.1–1.5 A (max. 2x15 W). Power supply 230 V. Internal resistance...
Dual-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–20V Pb with a current of 0.2–10 A (max. 2x100 W with mains supply or 2x250 W with direct current supply). Power supply 10–30 / 230...
Powerful two-channel quick charger with balancers for 1-18 cells. NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, (1–7S) LiHV, ULiHV, 2–28V Pb current 0.2–20 A (max. 2x200 W with mains supply or 2x600 W with direct current supply). Discharge 2x 0.2–3.0...
Miniature two-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–20V Pb current 2x 0.2–10 A (max. 2x250 W). Power supply 10–30 V. Internal resistance measurement, USB-C port for update.
High-performance two-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, 1–7Article LiHV / ULiHV, 2–24V Pb current 0.2–30 A (max. 1000 W one channel, max. 1500 W whole charger); discharge 0.2–3.0 A (max....
Miniature quick charger with balancer for charging 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with current 0.1–8 A (max. 200 W), discharge 0.1–1 A (max. 10 W). Power supply 10–30 V. Internal resistance...
Miniature fast charger with balancer for 1-16 pcs. NiCd/NiMH, 1–6 pcs. Li-Po/Li-ion/Li-Fe/LiHV/ULiHV, 2-24V Pb current 0.1-16 A (max. 350 W); discharge 0.1-1.0 A (max. 10 W). Power supply 10-34 V. Measurement of internal resistance, USB type C port for...
High-performance miniature quick charger with balancer for 1-16 cells NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, 1-7 cells LiHV, 2-24V Pb current 0.2-30A (max. 1000W); discharge 0.2-3.0A (max. 30W). Power supply 10-34 V. Internal resistance...
Two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/ LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains power supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply 10-30...
Dual-channel quick charger with balancers for 1-16 cells NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply...
Miniature two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV/ULiHV, 2-20V Pb current 0.2-10 A (max. 2x250 W or 1x400 W/0.2-16 A in parallel mode). Power supply 10-30 V. Measurement of internal...
LiPo battery set KAVAN with charging up to 1C and discharging 5 / 10C. Dual cell 2s1p 7.4 V 2600 mAh, dimensions: 93x42x14.5mm, weight 108g, service connector JST-XH, power connector mini-T, adapters for Aurora 9 and 9X.
Transmitter LiPo battery set KAVAN with charging up to 1C and discharging 5C. Dual cell 2s1p 7.4 V 2800 mAh, dimensions: 93x30x16.5mm, weight 88g, service connector JST-XH, power connector FUTABA.
Four-cell receiver set KAVAN 4.8 V/1050mAh in a flat layout with a JR/Hitec/UNI connector. Dimensions 68x31x17.5 mm, weight 85 g.
Four-cell receiver set KAVAN 4.8 V/350 mAh in a flat arrangement with a JR/Hitec/UNI connector. Dimensions 45x40x11 mm, weight 40 g.
Four-cell receiver NiMH battery pack 4.8 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. "Cube" arrangement. Dimensions: 55x30x30mm. Weight: 118 g.
Four-cell receiver NiMH battery pack 4.8 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. Side-by-side flat arrangement. Dimensions: 57x53.5x14.5mm. Um
Five-cell receiver NiMH battery pack 6.0 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. Side-by-side flat arrangement. Dimensions: 71.5x53.5x14.5mm.
Five-cell receiver NiMH battery pack 6.0 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. "Pyramid" arrangement. Dimensions: 53.5x43.5x27.5mm. Mass:
RX
LiPo RX-kit 2/3A in series 2500mAh RX-7.4V and transmitter FUTABA 7PX/10PX
LRP Electronic
L430351
Dimensions: 84x30x17 mm, weight 90g, JR connector, EHR balance connector.
Dimensions: 56x31x31 mm, weight 98g, JR connector and XHR balance connector.
Dimensions: 51x38x20 mm, weight 82g, JR connector, EHR balance connector.
Two-channel fast charger with balancers for 1-16 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2–24V Pb current 0.1–10 A (max. 2x100 W). Discharge 0.1-5.0 A (max. 2x10 W). Power supply 11-18 V/230 V. Internal resistance measurement, USB port for...
Two-channel fast charger with balancers for 1-15 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2-20V Pb current 0.1-20A (max. 2x200 W). Discharge 0.1-5.0A (max. 2x25 W). Power supply 10-30 V/230 V. Touch screen, internal resistance measurement, USB...
Pocket microprocessor quick charger with balancer for 1-16 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe, 2-24V Pb current 0.1-16A (max. 300W). Discharge 0.1-3.0A (max. 5W). Power supply 7-28V. Internal resistance measurement, microUSB port....
Dimensions: 89x29x12 mm, weight 62.3g, Connector: JR/Hitec
Two-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb current 0.1-15A (max. 2x100W). Discharge 0.1-3.0A (max. 2x8W). 230 V power supply. Internal resistance measurement, USB port,...
Powerful pocket microprocessor fast charger with balancer for 1-15 NiCd/NiMH cells, 1-6 LiPo/Li-ion/LiFe/LiHV, 6/12V Pb current 0.1-10A (max. 200W). Discharge 0.1-2A (max. 24W). Power supply 10-28V or 12-20V USB PD3.0/QC. Measurement of internal...
Pocket microprocessor fast charger with balancer for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe / LiHV, 2-20V Pb with current 0.1-10A (max. 200W, 50W with mains supply ). Discharge 0.1-2A (max. 10W). Power supply 230V / 10-30 V. Bluetooth...
Powerful pocket microprocessor fast charger with balancer for 1-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/LiHV, 6/12V Pb current 0.2-10A (max. 200W). Discharge 0.1-2A (max. 5W). Power supply 10-30 V. Measurement of internal resistance, stabilized...
Two-channel fast charger with balancers for 1-15 items NiCd/NiMH, 1-6 items LiPo/Li-ion/LiFe/LiHV, 6/12/24V Pb current 0.2-10A (max. 2x100W). Discharge 0.1-2.0A (max. 2x5W). Power supply 10-30 V/230 V. Internal resistance measurement, USB C...
Two-channel fast charger with balancers for 4-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/ LiHV, 6/12/24V Pb and maintenance-free Pb AGM with a current of 0.1-20A (max. 2x400W) . Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V/230 V. Measurement...
Four-channel fast charger with balancers for 2-15 cells NiCd/NiMH, 1-6 cells Li-poly/Li-ion/Li-Fe/ LiHV, 6/12/24 V Pb current 4x 0.1-10A (max. 4x100W/max. total 200W when mains powered). Discharge 0.1-2.0A (max. 4x5W). Power supply 11-30 V/230 V....
Small two-channel fast charger with balancers for 6-8 cells NiCd / NiMH, 2-4 cells LiPo / Li-ion / LiFe / LiHV, 6 / 12V Pb and maintenance-free Pb AGM current 0.1-5A (max. 2x50W). Power supply 230 V.
Two-channel fast charger with balancers for 4-15 items NiCd/NiMH, 1-6 items Li-poly/Li-ion/Li-Fe/ LiHV, 6/12/24V Pb current 0.1-20A (total max. 1000W /450W from the mains). Discharge 0.1-2.0A (max. 2x10W, 1x350W with external discharger). Power supply...
Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
Four-channel fast charger with balancers for 1-15 cells NiCd/NiMH, 1-6 cells Li-poly/Li-ion/Li-Fe/ LiHV, 2-20V Pb and maintenance-free Pb AGM with a current of 0.1-12A (max. 4x100W). Discharge 0.1-2.0A (max. 4x10W). Power supply 12 V/230 V. Measurement...
for MZ-10 and 12. SJ / JR connector, width 29mm, height 15mm, length 102mm, weight 115g,
Connector: GRAUPNER / JR, width: mm, height mm, length mm, voltage: 3.7V, weight g, For SANWA M-17 transmitter. Can be charged via mini USB type B cable.
Connector: GRAUPNER/JR, width: 29mm, height 14mm, length 62mm, voltage: 3.7V, weight 39g,
Battery for MZ-18 and MZ-24
Batteries for MZ-16.32 and similar.
Dimensions: 61x46x8.5mm, weight 51g, JR RX connector. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Dimensions: 61x46x8.5mm, weight 51g, JR RX connector. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Dimensions: 95x29x18mm, weight 98g, JR RX connector. For transmitters: Sanwa M 12 / MT-4 / SD-10G, Ezes-X and HITEC LYNX 4.
Small two-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 2x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
Small four-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 4x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
Capacity: 4000mAh, 5 cells, voltage: 6V, weight: 336g, size: 115x46x24mm and connector: JR / HITEC
Dimensions: 84x30x17 mm, weight 90g, JR connector, EHR balance connector.
Dimensions: 56x31x31 mm, weight 98g, JR connector and EHR balance connector.
Dimensions: 51x38x20 mm, weight 82g, JR connector, EHR balance connector.
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 50x30x32mm and connector: JR
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 84x32x17mm and connector: JR
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 84x32x17mm and connector: JR