Shopping Cart
There are no more items in your cart
- -0.12 €
CARTEN T410D DRIFT CAR 1/10 RWD kit
NHA106
CARTEN
1/10 drift chassis without all electronics, wheels and bodywork.
Express delivery
Large selection of carriers
Satisfaction guarantee
Chassis kit for recreational and competitive 1/10 RC drift. Carten T410D brings high-quality components made of carbon and aluminum. The modern layout includes a longitudinal upper engine mount and a battery holder near the rear axle. The result is an optimal center of gravity and rear axle load, optimal for racing use. The high maximum steering angle and wide geometry adjustment options will meet the requirements of demanding drivers.
Technical data:
- Drivetrain: RWD
- Wheelbase: 254~258 mm
- Wheel track: 200 mm
- Internal gear ratio: 2.35 (40/17T)
Features:
- Fully equipped with ball bearings
- Fully equipped with adjustable connectors
- Aluminum main gear carrier
- Steel axle shafts
- Adjustable aluminum shock absorbers
- Carbon lower and upper chassis plates and shock towers
- Aluminum servo lever
- Aluminum engine mount
- Aluminum bars
- Aluminum suspension arms
- Aluminum steering
- Ball differential
Required to purchase: RC kit, motor, controller, servo, gyro, drive battery with charger, body, wheels.
1 Item
4711233150153
Last items in stock
Body clips especially for 1/16 and 1/18 scale models
- -0.15 €
- Special price
Last items in stock
Last items in stock
The RUDDOG cleaning brush (round) is an essential tool for every RC car driver.
Last items in stock
The RUDDOG cleaning brush (round) is an essential tool for every RC car driver.
Last items in stock
wooden handle
Last items in stock
wooden handle
Tweezers with pointed bent ends. Overall length: 114mm
Mini soldering iron 60W with microprocessor temperature control (100-400 °C) with 12-24 V power supply. LED display and 2 buttons for easy operation. Adjustable operating temperature, temperature compensation and intelligent standby mode for energy...
Hex key / screwdriver with aluminum handle and replaceable shank.
Last items in stock
Hex key / screwdriver with aluminum handle and replaceable shank.
Hex key / screwdriver with aluminum handle and replaceable shank.
- -2.36 €
Bag dimensions: 54 x 26 x 22 cm.
Last items in stock
Transport bag on wheels with five compartments and pull-out handle. Dimensions: 60 x 37 x 60 cm.
Dual-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with a current of 0.2–12 A (max. 200 W). Discharge 2x 0.1–1.5 A (max. 2x15 W). Power supply 230 V. Internal resistance...
High-performance two-channel fast charger with balancers for 2-16 units. Li-Po/Li-ion/Li-Fe/LiHV/ULiHV with a current of 1-20 A (max. 2x1100 W). Discharge 2x 0.5-3.0 A (max 2x50 W). Power supply 230 V. Measurement of internal resistance.
KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
Last items in stock
Last items in stock
- -0.51 €
Last items in stock
- -0.59 €
12-14AWG power cable organizer. External dimensions 19x7.5x6 mm. Screw-in, 1.5 mm Allen key.
- -0.59 €
4/5mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip side length 9 mm, height 10 mm.
- -0.59 €
4mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip side length 9 mm, height 10 mm.
- -0.59 €
5mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip side length 9 mm, height 10 mm.
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
- -0.55 €
4/5mm transitional power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip outer diameter 10 mm, height 9.5 mm.
- -0.55 €
- New
4mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip outer diameter 10 mm, height 9.5 mm.
5mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Heatsink grips (red + black). Grip outer diameter 10 mm, height 9.5 mm.
- -0.55 €
4mm power connectors for Li-Po and Li-HV hardcase drive batteries with aluminum Low Profile grips (red + black). Outer diameter of grip 10 mm, height 6 mm.
- -3.94 €
A set of silicone oils for dampers and differential in viscosities most used for 1/10 drift. Including a practical nylon bag.
- -0.90 €
Adjustable aluminum front body mount for drift cars with strong 10mm magnets and hidden construction for a clean chassis look.
Pliers with long, curved, thin, flat jaws. Jaw width 1-5mm.
Last items in stock
Bag fits 1/10 2 and 4wd Buggy: Dimensions: 390x280x100mm
The bag fits for 1/10 Touring Car chassis. Dimensions: 460x220x120mm
Tool bag: Dimensions: 280x230x90mm
This Hobbytech brush set will allow you to thoroughly clean your radio-controlled car! The set contains 4 pieces.
- -0.75 €
Last items in stock
The set includes: side splitting pliers, semicircular straight pliers and curved ball joint pliers. The pliers are made of steel. The handles are coated with two-tone PVC.
- -1.52 €
- New
Last items in stock
Two-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb current 0.1-15A (max. 2x100W). Discharge 0.1-3.0A (max. 2x8W). 230 V power supply. Internal resistance measurement, USB port,...
- -7.26 €
Dual-channel fast charger with balancers for 4-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/LiHV, 6/12/24V Pb and maintenance-free Pb AGM with current 0.1-20A (max. 2x400W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V/230 V. Internal...
- -10.80 €
Dual-channel fast charger with balancers for 1-20 cells NiCd/NiMH, 1-8 cells LiPo/Li-ion/LiFe/LiHV, 6/12/24V Pb and maintenance-free Pb AGM with current 0.1-32A (max. 1x1100W or total max. 1600W). Discharge 0.1-4.0A (max. 2x45W). Power supply 9-49...
- -3.91 €
Microprocessor charger 15W with balancer for 2-3 Li-poly cells with charging current 1.2A for charging via service connector (type JST-XH). Power supply 110-230V.
- -1.46 €
Microprocessor charger 30W with balancer for 2-4 cells Li-poly / Li-Fe with switchable current 1, 2 or 3A. Mains supply 100-240V. Ideal as a much more powerful and intelligent replacement for "box" chargers from RTF / RTR sets.
- -4.30 €
Four-channel fast charger with balancers for 1-8 cells NiCd/NiMH, 1-4 cells Li-poly/Li-ion/Li-Fe/LiHV, 6/12 V Pb with current 4x 0.1-6.0A (max. 4x60W/max. total 100W when powered by mains). Discharge 0.1-2.0A (max. 4x5W). Power supply 10-30 V/230 V....
- -19.43 €
Four-channel fast charger with balancers for 2-15 cells NiCd/NiMH, 1-6 cells Li-poly/Li-ion/Li-Fe/LiHV, 6/12/24 V Pb with current 4x 0.1-10A (max. 4x100W/max. total 200W when powered by mains). Discharge 0.1-2.0A (max. 4x5W). Power supply 11-30 V/230...
- -8.29 €
Small two-channel fast charger with balancers for 6-8 cells NiCd / NiMH, 2-4 cells LiPo / Li-ion / LiFe / LiHV, 6 / 12V Pb and maintenance-free Pb AGM current 0.1-5A (max. 2x50W). Power supply 230 V.
- -15.53 €
Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
Last items in stock
Transport bag with two drawers for transporting accessories for RC cars or its accessories. The size of the drawer is 30 x 48 x 15 cm, the size of the bag is 54 x 34 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made of plastic...
Last items in stock
Transport bag with two drawers for transporting RC car accessories or its accessories. The dimensions of the drawer are 30 x 48 x 15 cm, the dimensions of the bag are 54 x 51 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made...
- -3.70 €
Last items in stock
Adapter for LRP FLOW X and NOSRAM HD controllers (all versions) and older FLOW, iX8 and SPIN.
- -0.28 €
Last items in stock
Last items in stock
- -0.20 €
Last items in stock
- -0.16 €
- -0.63 €
- -0.63 €
- -1.73 €
Last items in stock
- -0.08 €
Last items in stock
- -0.27 €
- -0.31 €
- -0.16 €
- -0.12 €
Last items in stock
Last items in stock
Last items in stock
- -1.69 €
- -0.83 €
- -0.16 €
- -0.47 €
- -0.36 €
- -0.36 €
Last items in stock
- -0.23 €
Last items in stock
- -0.66 €
- -0.71 €
Last items in stock
- -0.23 €
Last items in stock
- -0.20 €
- -0.12 €
- -0.23 €
Last items in stock
- -0.24 €
- -0.24 €
Last items in stock
- -0.12 €
- -0.47 €
- -0.23 €
- -0.59 €
- -0.78 €
- -0.44 €
Last items in stock
- -0.56 €
- -0.43 €
- -0.47 €
Last items in stock
- -0.47 €
- -0.78 €
- -1.37 €
Polycarbonate tires suitable for asphalt tracks.
- -0.82 €
Last items in stock
Polycarbonate tires suitable for carpet tracks.
- -0.94 €
Last items in stock
Polycarbonate tires suitable for P-Tile tracks.
- -0.67 €
- -0.51 €
Last items in stock
- -0.47 €
- -0.47 €
- -1.31 €
- -0.35 €
Last items in stock
- -0.43 €
Last items in stock
- -0.47 €
Last items in stock
Last items in stock
- -0.67 €
Last items in stock
- -3.43 €
- -1.38 €
- -1.46 €
Last items in stock
Rear width 210 mm, for wheelbases 255 mm.
- -1.38 €
Last items in stock
- -1.58 €
Last items in stock
- -1.77 €
Last items in stock
- -1.46 €
Last items in stock
- -1.66 €
Last items in stock
- -1.58 €
Last items in stock
- -1.38 €
Last items in stock
- -1.58 €
Last items in stock
- -1.58 €
Last items in stock
- -1.38 €
Last items in stock
- -1.77 €
Last items in stock
Last items in stock
- -1.58 €
Last items in stock
- -1.58 €
Last items in stock
- -1.77 €
Last items in stock
- -15.93 €
Clear body including lexan rear wing with aluminum brackets, basic decals and window masks.
Last items in stock
- -3.59 €
Clear body including basic stickers for windows and lights, no additional accessories. Body width: 195 mm.
- -0.79 €
Last items in stock
- -1.77 €
Last items in stock
- -33.07 €
Top ten-channel computerized steering wheel 2.4GHz RC kit Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry for competition car and boat models. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40...
- -33.10 €
Top ten-channel computerized steering wheel 2.4GHz RC kit Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry for competition car and boat models. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40...
Four-channel computerized steering wheel RC kit Futaba T-FHSS with telemetry/S-FHSS/FHSS for recreational car and boat models. Switch for 3rd channel, 4th channel controlled by mixer, memory for 10 models, program setting of functions (incl. ABS) and...
- -6.85 €
- Special price
Four-channel computerized steering wheel RC kit Futaba T-FHSS with telemetry/S-FHSS/FHSS for recreational and competition car and boat models. Switch for 3rd channel, 4th channel controlled by mixer, memory for 10 models, program setting of functions...
- -20.49 €
4-channel RC kit with telemetry with FHSS5 transmission including 1 RX-493i receiver.
Five-channel 2.GHz FHSS steering wheel RC kit for recreational car and boat models. 3 digital trims, rotary knob and 2 push-button switches assignable for channels 3-5 or mixes. Memory for 30 models, mix settings, dual deflections, end points, sub...
Seven-channel steering wheel RC kit 2.GHz FHSS for recreational model cars and boats. 3 digital trims, rotary knob, 2 3-position stick and 2 pushbutton switches assignable for channels 3-7 or mixes. Memory for 30 models, mix settings, double...
- -7.68 €
Last items in stock
One-way programmable AC regulator for car models. For motors from 3.0 thread (Brushless), (continuous current 400A), power supply 3.7-7.4V, weight 40g, BEC 6V/3A. (NiMh/LiPo/LiFe) incl. Sen. cable, dimensions: 32x34x21mm
- -10.84 €
Last items in stock
Electronic speed controller, direct successor of the world-famous COMET HD, winner of several IFMAR and EFRA competitions.
- Special price
QuicRun 1060 V2 60A
HW30120201
Electronic bidirectional controller 60 A series QuicRun for DC motors, waterproof, dustproof, with built-in BEC, suitable for 1/10 Touring Car / Buggy / Trucks / Rock Crawlers.
- -2.16 €
- -7.65 €
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
- -7.65 €
Last items in stock
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
- -7.65 €
Last items in stock
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
- -7.06 €
XeRun 160A series electronic AC regulator with maximum peak current up to 1200A, built-in SBEC circuit 6-7.4V/4A and programmable via LCD programming box. Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 3.5 hp
Last items in stock
Electronic AC regulator of the XeRun series with a maximum peak current of up to 1200 A, built-in BEC circuit and programmable via HW OTA module (BT). Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 4.5 Touring threads...
Digital HiVolt standard servo with Coreless motor and metal gears.
- -3.57 €
Last items in stock
Programmable digital HiVolt LowProfile servo with Coreless motor and metal gears.
- -4.30 €
Last items in stock
Small dual-mode gyro (Normal/AVCS) for stabilizing RC car control with S.BUS/S.BUS2 support. Possibility of remote gain control and switching of Normal/AVCS operating mode, setting of deflection limits, gyro response direction, selection of servo type...
- -8.25 €
Last items in stock
Small dual-mode gyro (Normal/AVCS) specially designed for drifting RC cars with S.BUS/S.BUS2 support. Possibility of remote gain control and switching of Normal/AVCS operating mode, setting of deflection limit, gyro response sense, selection of servo...
Very strong and fast low profile digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for 1:10 racing cars. Support S.BUS, S.BUS2 and SR mode. Power supply 5.0-8.4V. Thrust 23kg.cm, speed 0.08s/60° at 6.0V, thrust...
All-Aluminum Drift Gyro SRT-G14
- -3.90 €
Digital
MIBO Drift King Alu Purple Programmable (RWD Drift Spec/33.0kg/8.4V) Brushless Servo
MIBO
MB-2342P
Extra strong programmable digital low profile servo 66g with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 RWD RC drift cars. Thrust 20.0kg.cm, speed 0.11s/60° at 4.8V, thrust 25.0kg.cm, speed 0.09s/60° at 6.0V,
- -3.90 €
Digital
MIBO Drift King Alu Red Programmable (RWD Drift Spec/33.0kg/8.4V) Brushless Servo
MIBO
MB-2342R
Extra strong programmable digital low profile servo 66g with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 RWD RC drift cars. Thrust 20.0kg.cm, speed 0.11s/60° at 4.8V, thrust 25.0kg.cm, speed 0.09s/60° at 6.0V,
- -1.93 €
Malé dvourežimové gyro (Normal/AVCS) pro stabilizaci řízení RC aut s vestavěnou křivkou zisku (gain curve). Možnost dálkového ovládání zisku a přepínání provozního režimu, nastavení limitu výchylek, smyslu odezvy gyra. Pouze pro digitální serva....
- -1.93 €
Malé dvourežimové gyro (Normal/AVCS) pro stabilizaci řízení RC aut s vestavěnou křivkou zisku (gain curve). Možnost dálkového ovládání zisku a přepínání provozního režimu, nastavení limitu výchylek, smyslu odezvy gyra. Pouze pro digitální serva....
- -1.93 €
Malé dvourežimové gyro (Normal/AVCS) pro stabilizaci řízení RC aut s vestavěnou křivkou zisku (gain curve). Možnost dálkového ovládání zisku a přepínání provozního režimu, nastavení limitu výchylek, smyslu odezvy gyra. Pouze pro digitální serva....
Last items in stock
Digital programmable HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 12.8/15.6kg at 6.0/7.4V and 0.09/0.11s at 6.0/7.4V, weight 53.0g, 40.2x20.5x26.0mm. Operating voltage 4.8 - 8.4V.
- -0.63 €
DC electric motor size "540" with a nominal voltage of 7.2 V. Operating voltage range 3.7–12 V, speed at a nominal voltage of 23500 rpm. Diameter 36 mm, housing length 50 mm, shaft diameter 3.175 mm, weight 189 g.
AC JUSTOCK G2.1 motor, SENZORED, use for 1/10, 1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck / Truck) STOCK / SPORT Race, Rock Crawler (21.5T, 25.5T only)
16 threaded DC motor. Diameter: 36mm, length 57mm, motor shaft 3.175mm, operating voltage: 4.8-9.6V (4-8 NiCd / NiMH or 2S LiPo)
- -1.03 €
20 threaded DC motor. Diameter: 36mm, length 57mm, motor shaft 3.175mm, operating voltage: 4.8-9.6V (4-8 NiCd / NiMH or 2S LiPo)
- -4.73 €
Last items in stock
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm, (sensory motor)
Last items in stock
540 size AC sensor motor. Armature: sintered 12.5mm, operating voltage: 2S/7.4V, body length 51.6mm, diameter: 35.9mm, weight: 152g, 13.5 turns, timing adjustment range: 20- 60°, shaft 3.175mm. EFRA legal.
- -4.49 €
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
- -4.49 €
Last items in stock
The new XERUN D10 AC sensor motor, specially designed for 1/10 drifting cars.
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
- Special price
Last items in stock
Hobby
HV Stock Spec Shorty GRAPHENE-4 4900mAh Hardcase Battery - 7.6V LiPo - 135C / 65C
LRP Electronic
L431284
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
- -2.56 €
MIBO HV LiPo battery pack with discharge currents up to 130C/260C. Two-cell 2S1P 7.6 V 4000 mAh, dimensions 93x47x18 mm, weight 147 g, 4 mm connectors included. Red colour.
Team Corally SPORT RACING version for beginner racers with 5800mAh capacity in Shorty Hardcase version. Dimensions: 95x47x25mm, charging current max. 3C/14.4Amp., G4 power connector, G2 balance connector, Weight: 207g
- -2.36 €
Team Corally VOLTAX HiVolt version for real racers with 4200mAh capacity in LCG Shorty Hardcase version. Dimensions: 95x47x22mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 175-189g
- -2.65 €
Team Corally VOLTAX HiVolt version for real racers with 5000mAh capacity in Shorty Hardcase version. Dimensions: 95x47x25mm, charging current max. 3C/15Amp., G4 power connector, G2 balance connector, Weight: 198-214g
Team Corally VOLTAX HiVolt version for real racers with 4200mAh capacity in Shorty LCG Hardcase version. Dimensions: 95x47x22mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 170-184g
- -2.84 €
Last items in stock
Team Corally VOLTAX HiVolt version for real racers with 5000mAh capacity in Shorty Hardcase version. Dimensions: 95x47x25mm, charging current max. 3C/15.0Amp., G4 power connector, G2 balance connector, Weight: 192-208g
- -2.24 €
Team Corally X-CELERATED version for beginners and recreational racers with a capacity of 5000mAh in Shorty Hardcase version. Dimensions: 95x47x25mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 207g
Last items in stock
Aluminum body pillars for mounting on the front and rear damper towers (antlers) including magnets and mounting accessories.
- -1.53 €
Outer diameter of magnets 15 mm.
- -0.47 €
4 pcs, outer diameter of magnets 15 mm, for 6 mm posts.
Customers who bought this product also bought:
- -3.90 €
Digital
MIBO Drift King Alu Red Programmable (RWD Drift Spec/33.0kg/8.4V) Brushless Servo
MIBO
MB-2342R
Extra strong programmable digital low profile servo 66g with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 RWD RC drift cars. Thrust 20.0kg.cm, speed 0.11s/60° at 4.8V, thrust 25.0kg.cm, speed 0.09s/60° at 6.0V,
- -0.35 €
Last items in stock
- -1.58 €
Last items in stock
- -0.12 €
H-Speed metallic blue acrylic spray paint is suitable for a wide range of materials including lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
- -2.72 €
Elektronický střídavý regulátor (ESC) 120A řady QuicRun pro motory se senzory s vestavěným výkonným spínaným BEC obvodem 6V-7,4V/4A určený pro cestovní a driftovací auta nebo RC buggy 1:10. Napájení 2-3S LiPo, ideální pro senzorové motory velikosti...
- -1.93 €
Malé dvourežimové gyro (Normal/AVCS) pro stabilizaci řízení RC aut s vestavěnou křivkou zisku (gain curve). Možnost dálkového ovládání zisku a přepínání provozního režimu, nastavení limitu výchylek, smyslu odezvy gyra. Pouze pro digitální serva....
Polycarbonate tires suitable for asphalt tracks.
- -3.71 €
AC JUSTOCK G2.1 motor, SENZORED, use for 1/10, 1/12 On-Road (Truggy / Drifting Car / F1 / Monster) & Off-Road (Buggy / 2WD SC Truck / Truck) STOCK / SPORT Race, Rock Crawler (21.5T, 25.5T only)
Tap to zoom
