- -9.61 €
Axial SCX10 III Base Camp 4WD 1:10 RTR gray
Express delivery
Large selection of carriers
Satisfaction guarantee
Package contents
The package contains an assembled RC model car Axial® SCX10 ™ III Base Camp with installed components:
DC motor Tazer 540 35T,
regulator Spektrum Firma 40A,
servo Spektrum S614 MG,
receiver Spektrum SR315 DSMR / SLT.
Transmitter Spektrum SLT3 2.4 GHz, 4x AA batteries. Accessories: cross wrench. Instructions CZ and manual
EN,
DE,
FR,
IT.
Characteristics
The RC model Axial SCX10 III Base Camp in 1:10 scale with 4x4 drive is designed for all fans, expedition rides in the field, crossing obstacles and rock trials, who are mainly looking for top driving characteristics without the need for additional functions and at a good price. This is exactly the model. The latest SCX10 III chassis has been lightened from other superstructures to leave only a genuine chassis with excellent driving characteristics. A single-speed transmission is used, which further improves driving thanks to the lower center of gravity. The body is finished painted, but contains less detail to maintain a favorable price.
The advantage of the model is the chassis with C-shaped steel profiles , which minimize bending and twisting of the chassis. The chassis is fully equipped with ball bearings for smooth running. The gears are metal on the drive train for high durability. Excellent suspension is provided by aluminum shock absorbers filled with oil for authentic properties. The model is equipped with licensed Black Rhino discs with glued Falken Wildpeak tires made of R35 compound combining optimal grip with durability.
Axial ® SCX10 ™ III Base Camp ™ 4WD is factory-assembled and contains a powerful Tazer 540 35T DC motor, powered by a 40A Firma regulator. The steering is equipped with a waterproof * servo with metal gears. SLT3 RC kit with reliable 2.4 GHz transmission and all the settings you will need. To operate the model, you only need to add a 2-3S LiPo battery with an EC3 or IC3 connector and a suitable charger.
Chassis SCX10 ™ III
The model is equipped with a chassis reinforced with C-shaped steel profiles, which are connected by transverse reinforcements. This increases the overall rigidity of the model, minimizing bending and twisting. This achieves precise steering, which is important for overcoming obstacles in trial driving.
New single-speed transmission
A new single-speed LCXU gearbox with metal gears and a low center of gravity was produced for the model. It is fully equipped with ball bearings, ensuring smooth running and long life. Internal gears can be switched to use the wheelbase tuning conversion kit.
Optimized geometry
The geometry of the SCX10-III Base Camp 4WD front suspension is optimized to reduce the "Bump steer" effect. While the rear 4-element suspension minimizes torsion caused by acceleration torque.
Metal connectors
All connectors on the model are metal, the terminals are on stainless steel ball joints for long-lasting performance.
Oil shock absorbers
The aluminum shock absorbers are filled with oil for authentic performance and driving characteristics like a real car. The spring preload can be easily adjusted using the nut on the body. For better performance, the shock absorbers are larger or with a higher shock absorber volume.
RHINO wheels
Rhino mock-up black discs are officially licensed. The discs are one-piece with an imitation of a Beadlock ring.
Falken Wildpeak tires
Falken Wildpeak's 4.7 "high tires, made of R35, provide higher ground clearance and greater grip on dirt, rocks and other off-road trails.
3 channel RC kit
The RC kit with SLT3 transmitter and SR315 receiver provides reliable control in the 2.4 GHz band. All basic functions can be set on the transmitter: throttle trim and steering, limitation of max. Steering channel deviations, reverse, engine power limiter 50%, 75% and 100%. The free third channel hides the potential for an upgrade, such as adding and controlling lights, a winch, etc. The receiver contains both SLT and DMSR protocols, so the transmitter can later be upgraded to a universal Spectrum transmitter with a display.
Properties
- Sturdy and durable chassis SCX10-III with steel profiles
- Brand new single-speed LCXU gearbox - ball bearings, metal gears
- Licensed one-piece Black Rhino bikes
- Licensed Falken Wildpeak tires increase ground clearance
- Adjustable oil-filled shock absorbers with aluminum body
- RC set - 2.4 GHz SLT3 transmitter with 2.4 GHz SR315 receiver with SLT and DMSR
- Powerful DC motor Dynamite® 540 35T, regulator 40A
- Waterproof * servo with metal gears and torque 15 kg.cm
- Lightweight, simple and practical body
- Demello licensed off-road bumpers
- Favorable price of the model
* For information on water resistance specifications, refer to the operating instructions. Tips and tricks for operating in a wet environment can be found in the blog.
We recommend buying
For commissioning, it is necessary to add a drive battery and an adequate charger for the drive battery.
Recommended LiPo batteries
For normal riding, we recommend a 2 or 3 cell LiPo battery (7.4 V, 11.1 V), with EC3, IC3 connector.
- Smart LiPo battery Spectrum 7.4 V 5000 mAh, or Smart G2 LiPo battery Spectrum G2 7.4 V 5000 mAh
- Standard LiPo battery Black Magic 7.4 V 5000 mAh.
- Standard LiPo battery with maximum driving time Black Magic 7.4 V 6500 mAh.
- For a larger speed range Smart LiPo battery Spectrum 11.1 V 5000 mAh, or Smart G2 LiPo battery Spectrum G2 11.1 V 5000 mAh
Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.
Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. In addition, G2 batteries have up to 3x faster automatic discharge into storage mode. Smart G2 batteries can only be charged on Spektrum Smart and Smart G2 chargers.
Recommended Chargers for Spectrum Smart Batteries
Spektrum Smart chargers can charge both Smart and Smart G2 batteries as well as conventional batteries. Previously sold Smart chargers, after the upgrade, also support Smart G2.
- Charger with mains power supply Spektrum Smart S150 with one 1x50W output.
- Mains charger Spektrum Smart G2 S155 1x55W AC with one output 55W.
- Mains charger Spektrum Smart S1100 with one 1x100W output.
- Mains charger Spektrum Smart S2100 with two outputs 2x 100 W.
- High-performance mains charger Spektrum Smart G2 charger S1400 1x400W AC with one 400W output.
- High-performance mains charger Spektrum Smart G2 charger S2200 2x200W AC with two 2x200W outputs.
Recommended chargers for conventional LiPo and NiMH batteries
If you decide to run the model on conventional LiPo and NiMH batteries , you can use universal chargers with a power of at least 50 W.
- Dynamite Prophet Sport charger with one 50 W output
- Robitronic Expert LD 80 AC / DC charger with one 80 W output + EC3 charging cable
Shipping bag
Carry the RC model comfortably and safely in a Robitronic carrying bag. The bag is airtight and has an elastic edge that can be adjusted to the model. Thanks to the Velcro strap, the model is easy to carry. The synthetic material can be easily cleaned with water or soap suds if required.
Model lighting
For a breathtaking appearance, we recommend equipping the model with LED lighting. If the model already contains basic lighting, you can expand, improve or modify it according to your own needs.
- Light set Axial LED lighting Night Visions System
Advanced system with front LEDs (illuminates intensely when driving forward), brake LEDs (lights up intensively when braking), turn signals (flashing when turning to a specific side) and additional LEDs (for example for a light ramp). Possibility to connect another six light circuits. - Light set -Standard - Axial set of LED lighting
Standard light set with power supply module and diodes - The power supply module allows the connection of two LED beams, which will be permanently lit. The package contains high-brightness diodes ( 4x white LEDs for headlights and 2x red LEDs for taillights ). - Axial control unit LED control unit, 3-port
Control unit with the possibility of connecting three beams of permanently lit LED diodes. The package does not contain diodes - you can choose them according to your needs in the accessories for the item.
Accessories for normal operation
For normal operation of the Axial RC car, you need tire glue, bolt glue, a tool kit and silicone shock absorber oil. From our range we recommend an affordable set of tools for RC cars.
The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. We recommend Robitronic Tire Glue from our offer.
Sometimes it is necessary to add silicone oil to the model's shock absorbers and change the oil in the differentials. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. Repair kits or individual parts are supplied for these cases.
Screw glue is required for routine maintenance. Screws screwed into the metal material (eg screws in the motor, pin in the pinion) must be secured against loosening with this adhesive.
Protective covers for batteries
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for long travel times. On the contrary, the LiPo battery is particularly susceptible to mechanical damage.