E-flite Habu Super Sport 1.0m SAFE Select BNF Basic

The receiver electronics are equipped with AS3X electronic stabilization, which offers the highest level of accuracy and stabilization in flight. It is a completely new flight experience thanks to the latest technology, which can guide the model just like a cord. Based on information from the 3-axis gyroscope, the microprocessor constantly maintains the aircraft's position with the ailerons, rudder and elevator in the same orientation until you instruct the transmitter to change the position of the model.

If you are not a very experienced pilot or want to have a higher level of safety, or first get to know the model safely, you can activate the optional SAFE Select technology, which is integrated in the receiver. No programming is required, simply pair the receiver with or without SAFE, and if SAFE is selected, you will set a switch according to the instructions that can be used to turn the function on and off. The SAFE function secures the flight envelope by limiting the extreme flight limits of bank and roll. Electronic stability is also active, when the transmitter control levers are returned to neutral, the model aligns in horizontal flight.

SMART technology

The Habu SS 70mm EDF is equipped with the exclusive Spektrum ™ Avian ™ Smart Lite controller, which can provide a range of telemetry data related to the real-time power system, including engine speed, current, battery voltage and more - with both Smart and conventional LiPol batteries - via compatible receivers (including AR631) and transmitters equipped with Spectrum AirWare včetně (including DX6e and 8e, DX6 G2 / 3 and 8 G2, DX9, NX6, 8 and 10, iX12, iX20 and others).

High power drive unit

The model is equipped with a blower with a 10-blade rotor with a diameter of 70 mm and a 2847 2400rpm 6P AC motor, which provides enough thrust with a 4S LiPol battery or even higher power and speed with an optional 4S LiPol battery without the need to perform any settings / p>

Excellent flight characteristics

Aircraft models with electric blowers usually fly at higher speeds and their controllability at low speeds is worse. The unique and optimized design of the Habu SS kite improves maneuverability at low speeds, making it one of the easiest flying jets.

Stronger construction

The lightweight but rigid design of the composite-reinforced EPO airframe has been reinforced to handle higher power, higher speeds and higher multiplication acrobatics.

3-wheel chassis

The ideal 3-wheel landing gear is ideal for safe take-offs and landings, it is stable and stable, and thanks to the controlled bow leg it is perfectly controllable when taxiing. The model can also take off on a maintained grassy area. Thanks to the smaller cross-section of the wheels, the model has less resistance and achieves higher flight speeds.

Easy installation

Habu SS 70mm Sport EDF is supplied with ready-made components, such as fuselage, wing, tail surfaces, etc. These parts have a finished color and complete with all components and electronics. Only these basic parts are assembled with a few screws and you will be ready to fly before you charge the battery.

USB source

We recommend a powerful USB power supply to power the USB charger. With this source, you achieve significantly shorter charging times, compared to conventional USB sources (such as phone chargers). / p>

Recommended batteries

To power the model, we recommend a propellant LiPol battery with 4-6 cells (14.8–22.2V).

• For economical flying LiPo battery 4S Black Magic LiPol Car 14.8V 5000mAh 50C EC5 with EC5 connector.
• Higher power 6S Spectrum Smart LiPo 22.2V 4000mAh 50C IC5 with EC5 connector and Smart technology.
• Smart LiPo battery 6S Spectrum Smart G2 LiPo 22.2V 5000mAh 50C IC5 with Smart G2 technology
• For long flight and performance 6S Spectrum Smart G2 LiPo 22.2V 7000mAh 30C IC5 with Smart G2 technology

Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.

Recommended chargers for conventional and Smart batteries

If you decide to use modern Smart LiPo batteries in RC aircraft models, then we recommend the following chargers:

• Charger with mains power supply Spektrum S1100AC with one output 1x100W .
• Charger with mains power supply Spektrum S2100 with two outputs 2x 100W .

Recommended modern chargers for Smart batteries

• High performance AC charger Spektrum Smart G2 charger S1400 1x400W AC with one output 400W .
• High performance AC charger Spektrum Smart G2 charger S2200 2x200W AC with two outputs 2x200W .

There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.

Accessories for normal operation

For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). The Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.

For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.