Shopping Cart
There are no more items in your cart
Futaba FX-36, R7208SB receiver
FUT5003203
Futaba TX
Eighteen-channel RC set Futaba FASSTest (18/12CH) and T-FHSS Air with telemetry, FASST(Multi/7ch), S-FHSS 2.4GHz with the possibility of expansion to 32 channels (with 2 multiprop modules). HVGA touch LCD display, telemetry display, precise cross controls, 10
Express delivery
Large selection of carriers
Satisfaction guarantee
Telemetry current sensor. Measurement in the range: voltage 0 - 70V, current 0 - 150A, elapsed electric charge (max. 32 767mAh). Connection to S.BUS2 bus. Total length of power cable including sensor
Speed sensor of internal combustion engines OS Engines. Connection to governor (GV-1), gyro (GY701) or FBL Futaba unit (CGY760R / CGY755). The sensor is directly designed for mounting in the rear cove
Telemetric GPS sensor for measuring distance and speed with built-in barometric altimeter / vario. Measurement in the range: speed 0 - 500km / h, height -700 to + 5500m, vario -150 to + 150m / s. Conn
Six-channel receiver Futaba S-FHSS / FHSS-2.4GHz for general use. Power supply 4.8-7.4 V, dimensions 43.1x25.0x8.8 mm, weight 8.5 g. Diversity antennas.
Miniature super light receiver Futaba T-FHSS Air-2.4GHz for indoor models and park-flyers. Power supply 3.2-8.4 V, dimensions 20.0x10.0x3.0 mm, weight 1.0 g. Soldering terminals for servos, wide supply voltage range (also for 1S LiPo). Limited range of...
Last items in stock
S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 110 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
Last items in stock
S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 160 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 20 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 140 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
Last items in stock
S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 60 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
S.BUS / S.BUS2 splitter / extension cable 100 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2
S.BUS / S.BUS2 splitter / extension cable 100 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.B
S.BUS / S.BUS2 splitter / extension cable 10 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power supply cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2 devices from the receiver.
Last items in stock
S.BUS / S.BUS2 splitter / extension cable 10 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.BU
S.BUS / S.BUS2 splitter / extension cable 150 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2
S.BUS/S.BUS2 splitter/extension cable 150 cm with 3 sockets for S.BUS/S.BUS2 devices. Two-core cable without power supply wire (with green servo connector) - enables power supply of S-BUS/S.BUS2 devices from a special battery connected to one of the...
- New
S.BUS / S.BUS2 splitter / extension cable 30 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2 devi
S.BUS / S.BUS2 splitter / extension cable 30 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.BU
S.BUS / S.BUS2 splitter / extension cable 50 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2 devi
S.BUS / S.BUS2 splitter / extension cable 50 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.BU
70 mm Y-cable for S.BUS / S.BUS2 servos.
Telemetric barometric sensor for height measurement/variometer, measurement in the range: relative height -700 to +5500m and vario -150m/s to +150m/s. Connection to the S.BUS2 bus. Total length 175mm, weight 2.6g. Power supply 3.7-7.4V.
Telemetry sensor S.BUS2 for measuring the position of the servo lever, current (up to 10A) and temperature (-10 to 115 ° C) of two S.BUS2 servos. Connection to S.BUS2 bus. Total length 300mm, weight 9
Last items in stock
Telemetric magnetic speed sensor, measuring in the range 360 - 100,000 rpm. Connection to S.BUS2 bus. Total length 255mm, weight 4.7g. Power supply 3.7-7.4V.
Telemetric optical speed sensor, measurement in the range 360 - 300,000 rpm. Connection to S.BUS2 bus. Total length 160mm, weight 4.9g. Power supply 3.7-7.4V.
Telemetric phase speed sensor for AC motors (BLS), measurement in the range 360 - 300 000. Connection to S.BUS2 bus. Total length 475mm, weight 3.8g. Power supply 3.7-7.4V. The sensor connects to
S.BUS/S.BUS2 terminal (hub) with 6 sockets for connecting S.BUS/S.BUS2 devices. The S.BUS output of the receiver and the S.BUS servo can be plugged into any socket. The hub is equipped with feet for easy installation in the model using screws.
Telemetric temperature sensor for measurements in the range of -20 to +200°C. Connection to the S.BUS2 bus. Total length 535mm, weight 4.7g. Power supply 3.7-7.4V. Ideal for measuring the temperature of internal combustion engine heads and similar...
Telemetric temperature sensor for measurements in the range of 0 to 125°C. Connection to the S.BUS2 bus. Total length 350mm, weight 3.8g. Power supply 3.7-7.4V. Ideal, for example, for measuring the temperature of electric motors (especially AC) and...
Central strap with carabiner for comfortable hanging of Futaba transmitters - in black.
Central strap with carabiner for comfortable hanging of Futaba transmitters - in orange.
Charging cable for Futaba transmitter with 4mm banana plugs. For example for FX-36 etc. DC terminal with an outer diameter of 4.75 mm, an inner diameter of 1.7 mm and a positive pole on the inner side.
Replacement antenna for Futaba T12K, T14SG, T16SZ, T18SZ, FX-36 transmitters.
Two-cell LiFe battery 6.6 V 2100 mAh for Futaba transmitters.
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The KIT version includes: unassembled model, AC motor, carrier and balancing rotor blades.
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The KIT version includes: unassembled model, AC motor, carrier and balancing rotor blades.
Last items in stock
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The KIT version includes: unassembled model, AC motor, carrier and balancing rotor blades.
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The PNP version includes: unassembled model, AC motor, 4x servo, controller, carrier and balancing rotor blades.
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The PNP version includes: unassembled model, AC motor, 4x servo, controller, carrier and balancing rotor blades.
3D helicopter kit of "380" class with CCPM 120° cyclic plate with 875 mm diameter main rotor powered by AC motor. The PNP version includes: unassembled model, AC motor, 4x servo, controller, carrier and balancing rotor blades.
Tap to zoom
