Shopping Cart
There are no more items in your cart
HV9930 (0.098s/60°, 43.0kg.cm)
MKS27001
MKS
Very strong and fast digital standard servo 74g with metal gears with supply voltage range 6.0-8.4V, 2xBB. For general use for large model aircraft. Thrust 31.4kg.cm, speed 0.135s/60° at 6.0V, 38.8kg.cm, speed 0.110s/60° at 7.4V, thrust 43.0kg
Express delivery
Large selection of carriers
Satisfaction guarantee
Very strong and fast programmable digital standard servo with metal gears and output shaft mounted on two ball bearings for general use for large model aircraft. For perfect cooling even at very high loads, the servo is housed in an aluminum box with a ribbed middle part.
Increased supply voltage 6.0-7.4 V (nominal), operating 6.0-8.4 V.
With the help of the USB programmer/interface for DSP-1 servos and the operating PC program, you can program a wide range of servo parameters:
Dead Band: The width of the dead band indicates the amount of change in the width of the control signal pulses at which the position of the output shaft/servo lever has not yet changed. MKS default setting = 1 µs or 1.1 µs
Lock: Setting the behavior of the servo if it does not receive a control signal - Maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
Max. Duty (Max. engagement): The degree of engagement of the motor will be limited by this value - it limits the max. output of the servo motor.
Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Neutral: Adjusts the width of the control pulses in the neutral/center position of the servo.
Pulse Upper (Max. pulse width): The upper limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Boost: Engine power when starting from rest. The larger the value, the more force the motor starts.
Left Angle: Max. amount of servo deflection to the left.
Right Angle: Max. left servo deflection size.
Reversion : Reverses the sense of servo deflection.
Allow Uncont (Enable Fail-safe): In case of loss of the control signal, the servo will go to the preset emergency position corresponding to the "Uncontrolled Position" value.
Uncontrolled Pos: If "Allow Uncont" is enabled (Enable Fail-safe), it sets the servo's emergency deflection in case of signal loss.
Uncontrolled Time: The servo will go to the "Uncontrolled Position" emergency deflection after the "Uncontrolled Time" has elapsed in case of signal loss.
| Servo size | Standard |
| Servo type | Digital |
| Programmable | Yes |
| Thrust at 6.0 V [kg•cm] | 31.4 |
| Thrust at 7.4 V [kg•cm] | 38.8 |
| Thrust at 8.2 V [kg•cm] | 43 |
| Speed at 6.0 V [s/60°] | 0.135 |
| Speed at 7.4 V [s/60°] | 0.11 |
| Speed at 8.2 V [s/60°] | 0.098 |
| Control pulse width in neutral [µs] | 1520 |
| Repetition frequency [Hz] | 333 |
| Deadband [ms] | 0.0007 |
| Servo transmissions | Metal |
| Ball bearings | 2× |
| High voltage | Yes |
| Power supply [V] | 6 - 8.4 |
| Length [mm] | 40 |
| Width [mm] | 20 |
| Height [mm] | 38.8 |
| Weight [g] | 74 |
| Intended for | Airplanes, Helicopters |
Last items in stock
levers
Double Arm Metal Lever 63/76mm HBL950/990, HBL665/669, HV777/A+, DS9910, HV9930
MKS
MKSO02025-2
Last items in stock
levers
Double Arm Metal Lever Curved 63/76/89mm HBL950/990, HBL665/669, HV777/ DS9910, HV9930
MKS
MKSO02025-3
Last items in stock
Last items in stock
Last items in stock
levers
Single Arm Metal Lever 25/32mm HBL950/990, HBL665/669, HV777/A+, DS9910, HV9930
MKS
MKSO02025-5
levers
Single Arm Metal Lever 32/38mm HBL950/990, HBL665/669, HV777/A+, DS9910, HV9930
MKS
MKSO02025
levers
Single Arm Metal Lever 38/44/51mm HBL950/990, HBL665/669, HV777/A+, DS9910, HV9930
MKS
MKSO02025-1
Last items in stock
ARF semi-model kit inspired by the Turbo Beaver aircraft with a wingspan of 2,540 mm designed to be powered by an internal combustion engine or an electric motor. Very light structural construction, many carbon parts. A model capable of basic 3D...
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,610 mm, intended for propulsion by a combustion gasoline engine with a content of 100-120 cc. Very light structural construction of balsa and plywood laminated with carbon fabric,...
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,610 mm, intended for propulsion by a combustion gasoline engine with a content of 100-120 cc. Very light structural construction of balsa and plywood laminated with carbon fabric,...
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,610 mm, intended for propulsion by an internal combustion gasoline engine with a content of 100-120 cc. Very light construction, Oracover film coating, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,641 mm, designed to be driven by a gasoline engine with a capacity of 120cc or an electric motor. Very light construction, many carbon parts.
ARF kit 3D acrobatic special with a span of 2,642 mm, designed to be driven by a gasoline engine with a capacity of 120cc or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,642 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF stavebnice 3D akrobatického speciálu o rozpětí 2 642 mm, určená pro pohon benzínovým motorem o obsahu 120ccm nebo elektromotorem. Velmi lehká konstrukční stavba, mnoho uhlíkových dílů.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,641 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,641 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit for 3D acrobatic special with a span of 2 679 mm, designed to drive a 120 cc gasoline engine or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit for 3D acrobatic special with a span of 2 679 mm, designed to drive a 120 cc gasoline engine or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 2,670 mm, intended for propulsion by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
ARF 3D acrobatic special kit with a span of 2,794 mm, designed to drive a 120cc petrol engine or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,794 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
ARF kit 3D acrobatic special with a span of 2,896 mm, designed to be powered by a gasoline engine with a capacity of 150-180ccm. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,896 mm, designed to be powered by a gasoline engine with a capacity of 150-180ccm. Very light construction, many carbon parts.
Last items in stock
Momentálně nedostupné u výrobce, možné inovování a výroba v roce 2025. ARF stavebnice 3D akrobatického speciálu o rozpětí 3 353 mm, určená pro pohon benzinovým motorem o obsahu 180ccm nebo elektromotorem. Velmi lehká konstrukční stavba, mnoho...
Last items in stock
ARF kit 3D acrobatic special with a span of 1,778 mm, designed to be driven by an internal combustion or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 1,778 mm, designed to be driven by an internal combustion or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a semi-model of an acrobatic special with a span of 1,850 mm, intended for propulsion by a 30-40 cc internal combustion gasoline engine or an electric motor. Very light construction made of balsa and plywood laminated with carbon fabric,...
ARF kit 3D acrobatic special with a span of 1,879 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 1,905 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 1,905 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,980 mm, intended for drive by an AC electric motor of 3-4 kW. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,980 mm, intended for drive by an AC electric motor of 3-4 kW. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,981 mm, intended for electric or internal combustion engine propulsion. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,974 mm, intended for electric or internal combustion engine propulsion. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,974 mm, intended for electric or internal combustion engine propulsion. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,133 mm, intended for propulsion by an internal combustion gasoline engine with a content of 50-60 cc or an electric motor with a 10-12S Lipol power supply. Very light construction made of...
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,165 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,165 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
ARF kit of a 3D acrobatic special with a span of 2210 mm, intended for propulsion by a gasoline engine with a content of 50-60 cc or an electric motor. Very light structural construction, many carbon parts.
ARF kit of a 3D acrobatic special with a span of 2210 mm, intended for propulsion by a gasoline engine with a content of 50-60 cc or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 2160 mm, intended for propulsion by a gasoline engine with a content of 50-61 cc or an electric motor with a 12S Lipo power supply. Very light structural construction, many carbon parts.
Last items in stock
ARF semi-scale model of an acrobatic special with a span of 2,240 mm, designed to be driven by a combustion gasoline engine with a capacity of 60-76 cc or an electric motor. Very light construction, Oracover foil cover, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,238 mm, designed to be powered by a 50-60cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,238 mm, designed to be powered by a 50-60cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,290 mm, intended for propulsion by an internal combustion gasoline engine with a content of 50-76 cc or an electric motor. Very light carbon coated plywood construction, Oracover film...
ARF kit 3D acrobatic special with a span of 2,312 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
ARF kit 3D acrobatic special with a span of 2,312 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,312 mm, designed to be powered by a 60-70cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,312 mm, designed to be powered by a 60-70cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 2,312 mm, intended for propulsion by a 60-70cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,336 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
Tap to zoom
