- -3.55 €
Boo Slope 0.8m Kit

Express delivery

Large selection of carriers

Satisfaction guarantee
Package contents
The package contains all the wooden parts needed for the construction from precision lasered plywood, the construction case for the wing and tail surface from poplar plywood, the laminate fuselage with an overlay in carbon look, material for the rudder rods, assembly small parts, laminate steering levers, laminate milled parts , CFRP surface connection, decoration kit, illustrated instructions in German, English, French
Characteristics
Boo Slope Kit RC airplane model kit with a span of 0.8m. Small in size but designed for big fun on the slopes and off-road waves. The model was developed using modern 3D CAD technology , the laser-burnt wooden parts are connected and glued together in a few simple steps. Construction is relatively fast and even inexperienced modelers can do it in a few evenings. The advantage is the finished laminate fuselage , to which you attach the wing and butterfly tail surfaces.

The construction of the BOO Slope model is precisely made on a CNC laser and therefore has precisely fitting components. Using the assembly instructions, the BOO can be easily assembled even without a building plan, using simple tools. Before starting the assembly, read the assembly instructions carefully. The construction of the two halves of the wing and the tail surfaces takes place directly on the construction board. The final assembly takes place on a fixture that enables the precise alignment of all components to each other. The wing is separable and the butterfly tail surfaces can be dismantled very easily. The model can therefore be transported very easily.

The Boo Slope glider model has controlled ailerons and butterfly tail surfaces. Four 7g micro servos (approx. 20x8x18 mm) will be required for control. A 4-channel RC kit with 2Aile, V-Tail, Expo and D/R functions is required for driving. For coating, you need to purchase an iron-on foil (0.6m) and approx. 10g of weight to import the model. You will need a small receiver battery to power the on-board system.

Assembling the model
During the final assembly, a simple fixture will help you set up the model, in which you set up the tail surfaces symmetrically with the wing and fuselage.

Servo assembly
Servos for butterfly tail surfaces are located in the fuselage, which are mounted in a glued plywood structure.

Wing construction
For a strong, light and stiff construction of the wing, the diagonal mounting of the ribs is chosen. The wing has functional wings and is halved for disassembly.

Tail surfaces
The construction of the tail surfaces is reinforced with carbon, if you have a transmitter with the V-Tail function, you can have the rudders in the function of elevator and rudder. However, this model can also be controlled with an elevator and ailerons, so you can also use a simple RC kit.
We recommend to buy

Accessories for normal operation
For the normal operation of flying RC models, you need suitable adhesives, a set of tools and a storage case for LiPol batteries. From our assortment, we recommend a quality set of 1.5/2.0/2.5/3.0mm allen screwdrivers and Modelcraft Phillips screwdrivers (set of 6). Modelcraft mini pliers in a case (set) will certainly come in handy for assembly, and for cutting a Modelcraft cutting knife with an A6 pad.
For quick repair of model airplanes, we recommend the fast-curing 4-minute Epoxy glue. From our offer, we recommend Speed Epoxy 4 min. 71g

Protective covers for accumulators
Protective packaging is intended to limit the risk associated with the transport and charging of accumulators. LiPo accumulators, while maintaining small dimensions and low weight, can provide high discharge currents and have a large capacity. The LiPo battery is particularly susceptible to mechanical damage and therefore needs to be thoroughly protected.