Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek

Futaba 3PR, receiver R203GF

FUT5003049
FUTABA
Futaba FHSS three-channel RC steering set for recreational car and boat models. Switch for the 3rd channel, switches of the sense of deviations, setting of the amount of deviations for control and thr
More info
In stock - main warehouse: 1 pcs
Recommended retail price
74.49 €
Your price with VAT
()
61.56 €
Price without VAT
61.56 €

  • Did you find a better price?
  • Did you find a better price?

    * Required fields

    We will reply as soon as possible, usually within a few hours.

    By submitting the form you agree to the processing of your personal data (read)

     

     

    Express delivery

     

    Large selection of carriers

     

    Satisfaction guarantee

     

    Three-channel classic steering wheel RC set Futaba using the transmission system FHSS-2.4GHz for recreational models of cars and boats. With the R203GF receiver included in the kit, you have 3 PWM channels for classic servos.

    The T3PRKA transmitter in a classic steering wheel design with a handle that fits perfectly in the hand is equipped with a steering wheel control, a trigger for throttle control (forward / reverse 70:30), a slide switch for the third channel and a double steering knob on the handle. Under the hinged cover made of transparent plastic, you will find 2 mechanical rotary trims and deflection sense switches for the control and throttle channels and 2 knobs for setting the end points of the deflection throttles.

    You will need 4 AA alkaline batteries or NiMH batteries stored in the holder in the transmitter to put the transmitter into operation. You can charge the batteries in the transmitter using the charging socket.

    FUNCTION

    • FHSS-2.4GHz transmission system for RC cars without telemetry
    • 2 proportional channels + 1 switched
    • Steering wheel steering
    • Trigger for throttle control
    • 2-position switch for channel 3
    • Knob for setting the size of channel 1 deflections (steering, rudder)
    • 2 mechanical trims for channels 1 and 2
    • Deviation sense switches for channels 1 and 2
    • Fail safe failures for channel 2 (gas)
    • LED indicator of the status of transmitter batteries / accumulators

    Compatible receivers

    • Futaba R202GF FHSS-2.4GHz (only 2 channels)
    • Futaba R203GF FHSS-2.4GHz

    RC KIT CONTAINS

    • Futaba T3PRKA 2.4GHz transmitter
    • R203GF receiver
    • Switch with cable
    • Plastic screwdriver
    • Operating Instructions
    telemetry

    Futaba CA-RVIN-700 voltage sensor cable

    FUTABA
    FUT0141
    CA-RVIN-700 cable for measuring external voltage (eg drive battery) in the range 0 - 70V. Only for compatible telemetry receivers with special port (R3008SB, R7008SB, R7014SB, R7108SB).
    Gyros " Governors

    Futaba governor sensor for BPS-1 OS motors

    FUTABA
    FUT0085
    Speed sensor of internal combustion engines OS Engines. Connection to governor (GV-1), gyro (GY701) or FBL Futaba unit (CGY760R / CGY755). The sensor is directly designed for mounting in the rear cove
    Dual channel receiver Futaba S-FHSS / FHSS-2.4GHz for RC cars and boats. Power supply 4.8-7.4 V, dimensions 23x35x9 mm, weight 6 g.
    Futaba S-FHSS / FHSS-2.4GHz three-channel receiver for RC cars and boats. Power supply 4.8-7.4 V, dimensions 39x26x10 mm, weight 8 g.
    Obrázek Obrázek 2
    Last items in stock
    S.BUS

    Futaba S.BUS/S.BUS2 decoder SBD-2

    FUTABA
    FUT5102620
    S.BUS/S.BUS2 decoder enabling the connection of up to 8 classic servos (analog and digital) to the S.BUS or S.BUS2 bus. The possibility of changing the channel assignment with a rotary switch and separate power supply of the servos from the receiver....
    Obrázek
    Last items in stock
    S.BUS

    Futaba SBUS decoder SBD-1 110cm

    FUTABA
    FUT5102490
    S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 110 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
    Obrázek
    Last items in stock
    S.BUS

    Futaba SBUS decoder SBD-1 160cm

    FUTABA
    FUT5102489
    S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 160 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
    S.BUS

    Futaba SBUS decoder SBD-1 20cm

    FUTABA
    FUT5102500
    S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 20 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
    S.BUS

    Futaba SBUS decoder SBD-1 40cm

    FUTABA
    FUT5102491
    S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 140 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
    Obrázek
    Last items in stock
    S.BUS

    Futaba SBUS decoder SBD-1 60cm

    FUTABA
    FUT5102501
    S-BUS decoder enabling the connection of up to three classic servos to the S-BUS with cables with a total length of 60 cm. Suitable for analog and digital servos with a standard power supply of 4.8-6.0 V (4-5 cells NiMH). Cannot be used for S-BUS2.
    S.BUS

    Futaba SBUS SBC HUB 100cm

    FUTABA
    FUT0076
    S.BUS / S.BUS2 splitter / extension cable 100 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2
    S.BUS / S.BUS2 splitter / extension cable 100 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.B
    S.BUS

    Futaba SBUS SBC HUB 10cm

    FUT0073
    S.BUS / S.BUS2 splitter / extension cable 10 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power supply cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2 devices from the receiver.
    S.BUS

    Futaba SBUS SBC HUB 150cm

    FUTABA
    FUT0077
    S.BUS / S.BUS2 splitter / extension cable 150 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2
    S.BUS/S.BUS2 splitter/extension cable 150 cm with 3 sockets for S.BUS/S.BUS2 devices. Two-core cable without power supply wire (with green servo connector) - enables power supply of S-BUS/S.BUS2 devices from a special battery connected to one of the...
    Obrázek
    • New
    S.BUS

    Futaba SBUS SBC HUB 30cm

    FUTABA
    FUT0074
    S.BUS / S.BUS2 splitter / extension cable 30 cm with 3 sockets for S.BUS / S.BUS2 devices. Three-core cable with power cable (with orange servo connector) - enables power supply of S-BUS / S.BUS2 devi
    S.BUS / S.BUS2 splitter / extension cable 30 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.BU
    S.BUS / S.BUS2 splitter / extension cable 50 cm with 3 sockets for S.BUS / S.BUS2 devices. Two-core cable without power supply cable (with green servo connector) - enables power supply of S-BUS / S.BU
    Obrázek
    Last items in stock
    Gyros " Governors

    Futaba sensor governor GV

    FUTABA
    FUT3220
    Speed sensor for connection to a governor (GV-1), gyro (GY701) or FBL of a Futaba unit (CGY750, CGY760R / CGY755).
    telemetry

    Futaba sensor serv. S.BUS2 SBS-01S

    FUTABA
    FUT1140
    Telemetry sensor S.BUS2 for measuring the position of the servo lever, current (up to 10A) and temperature (-10 to 115 ° C) of two S.BUS2 servos. Connection to S.BUS2 bus. Total length 300mm, weight 9
    telemetry

    Futaba speed sensor - magnetic SBS-01RM

    FUTABA
    FUT5102559
    Telemetric magnetic speed sensor, measuring in the range 360 - 100,000 rpm. Connection to S.BUS2 bus. Total length 255mm, weight 4.7g. Power supply 3.7-7.4V.
    telemetry

    Futaba speed sensor - optical SBS-01RO

    FUTABA
    FUT510250
    Telemetric optical speed sensor, measurement in the range 360 - 300,000 rpm. Connection to S.BUS2 bus. Total length 160mm, weight 4.9g. Power supply 3.7-7.4V.
    Telemetric phase speed sensor for AC motors (BLS), measurement in the range 360 - 300 000. Connection to S.BUS2 bus. Total length 475mm, weight 3.8g. Power supply 3.7-7.4V. The sensor connects to
    S.BUS/S.BUS2 terminal (hub) with 6 sockets for connecting S.BUS/S.BUS2 devices. The S.BUS output of the receiver and the S.BUS servo can be plugged into any socket. The hub is equipped with feet for easy installation in the model using screws.
    Obrázek
    Last items in stock
    S.BUS / S.BUS2 terminal (hub) with 4 sockets for connecting S.BUS / S.BUS2 devices. The S.BUS output of the receiver and the S.BUS servo can be connected to any socket. The hub is equipped with feet p
    telemetry

    Futaba temperature sensor SBS-01T

    FUTABA
    FUT5102561
    Telemetric temperature sensor for measurements in the range of -20 to +200°C. Connection to the S.BUS2 bus. Total length 535mm, weight 4.7g. Power supply 3.7-7.4V. Ideal for measuring the temperature of internal combustion engine heads and similar...
    Trays and belts

    Futaba transmitter strap - black

    FUTABA
    FUT1063
    Central strap with carabiner for comfortable hanging of Futaba transmitters - in black.
    Trays and belts

    Futaba transmitter strap - orange

    FUT1037
    Central strap with carabiner for comfortable hanging of Futaba transmitters - in orange.
    Obrázek
    Last items in stock
    telemetry

    Futaba voltage sensor SBS-01V

    FUTABA
    FUT5102582
    Telemetry sensor for measuring the drive battery voltage in the range 0-100V. Connection to S.BUS2 bus. Total length 870mm, weight 6g. Power supply 3.5-8.4V.
    Obrázek
    • Special price
    AA (pencil) NiMH batteries with very low self-discharge suitable for powering receivers in RC models and similar applications with lower current consumption, but the required long life. Weight: 26g, dimensions: 14.5x50.4mm, voltage: 1.2V
    NiMH

    KAVAN NiMH 1.2V 2000mAh AA

    Kavan
    KAV33.10103
    AA (pencil) NiMH batteries with very low self-discharge suitable for powering receivers in RC models and similar applications with lower current consumption, but required long endurance. Weight: 28.4 g, dimensions: 14.5x50.4 mm, voltage: 1.2 V, max....
    AA (pencil) NiMH batteries with very low self-discharge suitable for powering receivers in RC models and similar applications with lower current consumption, but required long endurance. Weight: 28.4 g, dimensions: 14.5x50.4 mm, voltage: 1.2 V, max....

    Customers who bought this product also bought: