Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek

RC10B74.2 Team Kit kit (4WD)

AE90036
Associated
Engineers at Team Associated Area 51 decided to get more power out of the RC10B74 4WD buggy chassis and introduced the RC10B74.2 and RC10B74.2D models.
More info

Sale is over

 

Express delivery

 

Large selection of carriers

 

Satisfaction guarantee

 

Design of champions

As tires, engines, batteries and tracks evolve, Team Associated adapts and improves with each iteration of the RC10. The engineers at Team Associated's Area 51 decided to get more power out of the RC10B74 4WD buggy platform by introducing the RC10B74.2 and RC10B74.2D models. Our goal was to reduce overall weight, lower the center of gravity, and improve handling during jumps and impacts. We exceeded expectations.

The RC10B74.2 and RC10B74.2D models feature sculpted front and rear transmissions that lower the center of gravity by removing weight from the high points of the car. We've modified the differentials to improve cornering speed and increase impact stability, allowing the buggy to corner faster on carpet and dirt tracks with high grip. Equipped with the latest 13mm high-volume damper technology from Team Associated, the RC10B74.2 takes the handling of jumps and impacts to the next level. The introduction of rack-wing front suspension arms and the inclusion of LTC gear sets for the differentials make the RC10B74.2 chassis easier and more predictable on any track.

Due to ongoing research and development, the photo may not correspond to the final model. The vehicle shown on these pages is equipped with items that are NOT part of the kit: Reedy motor, battery, ESC-Regulator, servo, receiver, wheels, tires and gear. Requires assembly and painting.

Features of the B74.2 Team kit

  • New lightweight molded gears front and rear: Two fixed-height front gears with 0 and +2 mm differential height options. One rear derailleur with RC10B6 style inserts allowing 0, +1, +2 and +3mm differential height selection.
  • New aluminum dampers and springs with a large 13mm thread and machined damper pistons for better handling on impacts and jumps
  • New gull-wing front suspension arms and associated shock tower for a lower center of gravity and better steering predictability
  • LTC differential kits are included. Which reduce performance binding and provide a more predictable power transfer.
  • The new battery mounting system uses inserts to adjust the inclination of the weight. O-ring style battery strap with pull tabs.
  • New larger 3.5mm tensioners with updated rod end style ball studs to increase durability and reduce suspension binding
  • New central bulkhead fan mount that mounts the fan above the engine for better cooling performance.
  • New -2mm fender mounts for use with slicks and low profile carpet tires that further lowers the center of gravity.
  • +3mm aluminum steering rack to optimize steering at low ride heights
  • 66mm rear drive shafts and CVA axles for more traction when riding for power and more predictable handling
  • For RC10B74.2: 2-piston heavy-duty, high-capacity center slip clutch with LCF pad material
Obrázek Obrázek 2
Last items in stock
Accessories

Aluminum fan HV 35mm with black cable

RUDDOG
RP-0728
35mm aluminum fan fitted with a JR connector. Package contents: 35mm fan and mounting. screw. For models such as: Associated B74, XRAY XB4, LOSI 22X-4, YOKOMO MO1.0.
Obrázek
Last items in stock
A foam pad ideal as a work surface for a pit stop. Strong, durable and washable. "Reinforced" with Associated logo.
230 +12

Charger TD 610 Pro 100W

1GT0114
Microprocessor quick charger controlled by touch screen with balancer for 1-14 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / Li-F / LiHVe, 2-20V Pb current 0.2-10A (max. 100W). Discharge 0.1-3.0A (max. 8W). Mains or 10-18V supply. MicroUSB port, fan...
230 +12

iSDT charger 608AC

iSDT
ISDT1010
Small quick charger with balancer for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–24V Pb with 0.1–8 A current (max. 50 W when powered from the mains, max. 200 W from the car battery). Discharge 0.1–1.0 A (max. 10 W)....
230 +12

iSDT charger K1

iSDT
ISDT1001
Dual-channel quick charger with balancers for 1–16 cells. NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV / ULiHV, 2–20V Pb with a current of 0.2–10 A (max. 2x100 W with mains supply or 2x250 W with direct current supply). Power supply 10–30 / 230...
230 +12

iSDT charger K4

iSDT
ISDT1002
Powerful two-channel quick charger with balancers for 1-18 cells. NiCd / NiMH, 1-8 cells Li-Po / Li-ion / Li-Fe, (1–7S) LiHV, ULiHV, 2–28V Pb current 0.2–20 A (max. 2x200 W with mains supply or 2x600 W with direct current supply). Discharge 2x 0.2–3.0...
Dual-channel quick charger with balancers for 1-16 cells NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply...
metric

MIBO Allen screwdriver 1.5mm

MIBO
MB-7511
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
metric

MIBO Allen screwdriver 2.0mm

MIBO
MB-7512
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
metric

MIBO Allen screwdriver 3.0mm

MIBO
MB-7513
MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
Other

MIBO Aluminum tool stand

MIBO
MB-7501
MIBO aluminum stand for 6 pcs screwdrivers, 4 pcs electric screwdriver bits and mobile phone. Including compartments for storing parts, a screw gauge and holes for soldering XT60 and 2, 3.5, 4 and 5mm bullet connectors.
Two-channel fast charger with balancers for 1-16 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2–24V Pb current 0.1–10 A (max. 2x100 W). Discharge 0.1-5.0 A (max. 2x10 W). Power supply 11-18 V/230 V. Internal resistance measurement, USB port for...
Springs and dampers

MIBO Electric Bubble Remover - 1/10 & 1/8 Offroad

MIBO
MB-7202
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 15.6 and 19mm shock absorber plates, 1/10 and 1/8 differential mount. Including strong packaging for transport.
Springs and dampers

MIBO Electric Bubble Remover - 1/10 Onroad & Offroad

MIBO
MB-7201
Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 14.8 and 15.6mm damper plates, 1/10 differential mount. Including strong packaging for transport.
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
Obrázek
Last items in stock
MIBO lightweight black carbon handle with 3mm diameter hole. Suitable for 1.5mm and 2.0mm hex, file tip and other bits with 3mm diameter.
MIBO lightweight black carbon handle with 4mm diameter hole. Suitable for 3.0mm hex and other bits with 4mm diameter.
Other

MIBO Screwdriver set

MIBO
MB-7802
The set contains black screwdrivers with a carbon handle in sizes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket).
Obrázek Obrázek 2
Last items in stock
The set includes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket) black screwdrivers with a carbon handle, and an aluminum stand for 6 screwdrivers, 4 electric screwdriver bits and a mobile phone. Including compartments for storing parts, gauge w
Two-channel fast charger with balancers for 1-15 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2-20V Pb current 0.1-20A (max. 2x200 W). Discharge 0.1-5.0A (max. 2x25 W). Power supply 10-30 V/230 V. Touch screen, internal resistance measurement, USB...
230 +12

SKY RC T1000 Maestro 1000W

SKY RC
3SK10182
Two-channel fast charger with balancers for 4-15 items NiCd/NiMH, 1-6 items Li-poly/Li-ion/Li-Fe/ LiHV, 6/12/24V Pb current 0.1-20A (total max. 1000W /450W from the mains). Discharge 0.1-2.0A (max. 2x10W, 1x350W with external discharger). Power supply...
230 +12

SKY RC T200 charger 2x100W

SKY RC
3SK10155
Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
230 +12

X2 Mini charger

GT Hobbies
1GT0119
Small two-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 2x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
230 +12

X4 Mini charger

GT Hobbies
1GT0118
Small four-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 4x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
Accessories and stickers

AE stickers

Associated
AE91913
Obrázek
Last items in stock
Associated

B74 plastic servo levers, 4 pcs.

Associated
AE92247
2x 23 teeth and 18.5mm, 2x 25 teeth and 20.0mm, 1x aluminum circlip.
Obrázek
Last items in stock
Associated

B74 steel center differential carriers, 2 pcs.

Associated
AE92147
Optional center differential spare part (AE92144). It is not part of the standard kit.
Obrázek
Last items in stock
Associated

B74 steel spacers, 6 pcs.

Associated
AE92143
Obrázek
Last items in stock
Associated

B74/B7 rear arm pins, 2 pcs.

Associated
AE92188
Obrázek
Last items in stock
Associated

CVA carrier pins, 4pcs.

Associated
AE91436
Obrázek
Last items in stock
Associated

Disc carriers, 4.0 mm, 2 pcs.

Associated
AE91862
Obrázek
Last items in stock
Associated

Plastic joints 12+2 pcs.

Associated
AE92308
Obrázek
Last items in stock
Associated

Steel washers 5.1x8.0x0.20mm, 10 pcs.

Associated
AE92137
Same for front and rear differential.
Obrázek Obrázek 2
Last items in stock
Associated

B7 - B74 Carbon wing pad

Revolution Design
RDRP0639
Obrázek Obrázek 2
Last items in stock
levers

B74.2 aluminum servo lever 25T - 20mm

Revolution Design
RDRP0662
Servo lever for Team Associated B74.2 chassis in combination with 25T servos Savöx, SRT, MIBO/Kavan and many others.
Obrázek
Last items in stock
bearings

ULTRA ball bearing set for ASSOCIATED B74.2 (26 pcs.)

Revolution Design
RDRP3025-3
Ball bearings of the highest quality. Covered on both sides (a metal dust cover on one side and a rubberized dust cover on the other). The set contains 26 pcs. of ball bearings: 6x 5x10x4mm, 8x 10x15x4mm, 4x 5x8x2.5mm, 4x 4x7x2.5mm, 4x 5x12x4mm. The...
Obrázek
Last items in stock
Spoilers and Wings

B6 lexan rear wing, 1 pc.

AE91741
Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry 10-channel computer steering wheel 2.4GHz RC kit for racing model cars and boats. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40 models +
Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
Obrázek
Last items in stock
Hobby

COMET HD controller, black

NOSRAM
N90970
One-way programmable AC regulator for car models. For motors from 3.0 thread (Brushless), (continuous current 400A), power supply 3.7-7.4V, weight 40g, BEC 6V/3A. (NiMh/LiPo/LiFe) incl. Sen. cable, dimensions: 32x34x21mm
Obrázek Obrázek 2
Last items in stock
Sport

Flow X OFFROAD controller

LRP Electronic
L500003
Electronic speed controller specially for offroad - the direct successor to the world-famous LRP Flow, the winner of several IFMAR and EFRA competitions.
Obrázek Obrázek 2
Last items in stock
Electronic speed controller especially for offroad - direct successor of the world-famous COMET HD winner of several IFMAR and EFRA competitions.
Sport

XERUN XR10 PRO 160A - black - regulator

HOBBYWING
HW30112600
XeRun 160A series electronic AC regulator with maximum peak current up to 1200A, built-in SBEC circuit 6-7.4V/4A and programmable via LCD programming box. Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 3.5 hp
Electronic AC regulator of the XeRun series with a maximum peak current of up to 1200 A, built-in BEC circuit and programmable via HW OTA module (BT). Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 4.5 Touring threads...
Sport

XERUN XR10 PRO G2S 160A - black - regulator

HOBBYWING car
HW30112613
Electronic AC regulator of the XeRun series with a maximum peak current of up to 1200 A, built-in BEC circuit and programmable via HW OTA module (BT). Ideal for 1/10 scale touring cars, 1/10 buggies and crawlers. For engines from 4.5 Touring threads...
Digital

Futaba HPS-CB500 (25.5kg 0.06s / 60 °)

FUTABA
FUT5102687
Very powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for car models. Support for S.BUS, S.BUS2 and SR mode. Power supply 5.0-8.4V. Thrust 20.6kg.cm, speed 0.07s / 60 ° at 6.0V, thrust 25.5kg.cm, speed 0.06s...
Digital

Futaba HPS-CB701 (49kg 0.075s/60°)

FUTABA
FUT5102698
Monstrously powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for 1:8 cars. Support S.BUS, S.BUS2, SR and UR mode. Power supply 5.0-8.4V. Thrust 42kg.cm, speed 0.09s/60° at 6.0V, thrust 49kg.cm, speed...
Very strong and fast programmable digital standard servo 83g with AC (brushless) motor, with steel gears and a wide range of supply voltage 4.8-8.4V, 3xBB, ideal for large model airplanes, RC cars 1:8 and 1:10 etc. .Thrust 28.0kg.cm, speed 0,
Digital

GO-1280MG (0.085s/60°, 40kg.cm)

Kavan
KAV20.1280MG
Very strong and fast programmable digital standard servo 79g with AC (brushless) motor, with magnetic encoder, with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for 1:8 and 1:10 off-road RC cars etc. Thrust 27.0kg.cm,
Digital

HSB-9360TH HV (17kg 0.06s)

Hitec
1HI3881
Super fast BRUSHLESS digi servo of the new generation with lightning-fast response for 3D helicopters, airplanes and cars. Programmable, thrust 17kg.cm, speed 0.08s/60° at 6.0V, 17kg.cm, speed 0.06s/60° at 7.4V. Box with heat sink.
Very strong and extremely fast programmable digital standard servo 78g with AC (brushless) motor with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for off-road 1:10 RC cars. Thrust 16.0kg.cm, speed 0.070s/60° at 6.0V
Very strong and very fast digital standard servo 69.5g with AC (brushless) motor with steel gears and wide range of supply voltage 4.8-8.4V, 2xBB, ideal for 1:10 off-road RC cars. Thrust 14.0kg.cm, speed 0.075s/60° at 6.0V, thrust 17.0kg.cm,
Very powerful and very fast programmable digital low-profile servo 57g with AC (brushless) motor with steel gears and wide range of supply voltage 4.8-8.4V, 2xBB, ideal for off-road 1:10 RC cars. Thrust 17.0kg.cm, speed 0.090s/60° at 6.0
Digital Low Profile standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 18.0/25.0/32.0kg at 6.0/7.4/8.4V and 0.10/0.08/0.065s on 6.0/7.4/8.4V, weight 57.0g, 40.3x20.2x25.4mm. Operating voltage 4.8 - 8.4V.
Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 15.0/20.0/25.0kg at 6.0/7.4/8.4V and 0.085/0.065/0.055s at 6.0/ 7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 23.0/28.0/35.0kg at 6.0/7.4/8.4V and 0.12/0.095/0.085s at 6, 0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
Digital

SC-1258TG+ Digital Servo (12kg-0.08s/60°)

SAVOX
SAVOX-SC1258TG
Digital standard servo with Coreless motor and metal gears, 2x ball bearing, 9.6/12.0kg at 4.8/6.0V and 0.10/0.08s at 4.8/6.0V, weight 52 ,4g, 40.3x20.2x37.2mm. Operating voltage 4.8 - 6.0V.
Digital HiVolt standard servo with Coroless (coreless) motor and metal gears, 2x ball bearing, 13.0/21.0kg at 6.0/7.4V and 0.11/0.095s at 6.0/7.4V, weight 62 .0g, 40.3x20.2x37.2mm. Operating voltage 6.0 - 8.4V.
Obrázek
Last items in stock
Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 30.0/35.0kg at 7.4/8.4V and 0.08/0.07s at 7.4/8.4V, weight 63.0g , 40.3x20.2x37.2mm. Operating voltage 4.8 - 8.4V.
Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 14.0/16.0kg at 6.0/7.4V and 0.08/0.065s at 6.0/7.4V, weight 56.0g, 40.3x20.2x37.2mm. Operating voltage 6.0 - 7.4V.
Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 20.0/25.0kg at 7.4/8.4V and 0.065/0.055s at 7.4/8.4V, weight 64.0g, 40, 3x20.2x37.2mm. Operating voltage 6.0 - 8.4V.
Sport

N22 Modified 5.5 threaded motor

NOSRAM
N920002
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 5.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Obrázek
Last items in stock
Sport

N22 Modified 6.0 Threaded Engine

NOSRAM
N920010
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 6.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Obrázek
Last items in stock
Sport

N22 Modified 6.5 thread engine

NOSRAM
N920003
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 6.5 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Obrázek
Last items in stock
Sport

N22 Modified 7.0 Threaded Engine

NOSRAM
N920011
AC motor size 540. Armature: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.0 turns, rpm, rpm min. , shaft 3.17mm, power: W, efficiency %, (sensor motor)
Sport

N22 Modified 7.5 thread motor

NOSRAM
N920004
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Obrázek Obrázek 2
Last items in stock
Sport

N22 Stock Spec 13.5 threaded motor

NOSRAM
N920201
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm, (sensory motor)
Obrázek Obrázek 2
Last items in stock
Sport

Vector X22 Modified 7.5 thread motor

LRP Electronic
L520008
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1 - 2S LiPo, body length 50.8mm, diameter: 35.9mm, weight: 159-164g, 7.5 threads, o / min, o / min. , shaft 3,17mm, power: W, efficiency%, (sensor motor)
Obrázek Obrázek 2
Last items in stock
Sport

Vector X22 Stock Spec 13.5 threaded motor

LRP Electronic
L520201
AC motor size 540. Anchor: sintered 12.5mm, operating voltage: 1S - 2S, weight: 149-155g, 13.5 threads, shaft 3.17mm, (sensory motor)
Sport

XERUN V10 5.5T threads - G3 - black

HOBBYWING
HW30401107
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - reworked design, higher performance
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
Sport

XERUN V10 6T threads - G3 - black

HOBBYWING
HW30401117
The HobbyWing V10 G3 is the evolution of the previous G2 engine series - the redesigned design, the higher performance
Sport

XERUN V10 7.5T threads - G3 - black

HOBBYWING
HW30401110
The HobbyWing V10 G3 engine is an evolution of the previous G2 engine series - redesigned design, higher performance
Obrázek Obrázek 2
Last items in stock
Sport

XERUN V10 7T Thread - G3 - black

HOBBYWING
HW30401118
The HobbyWing V10 G3 is the evolution of the previous G2 engine series - the redesigned design, the higher performance
Obrázek
Last items in stock
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
Obrázek
  • Special price
The latest generation of LRP batteries in 2020-2022. "GRAPHENE 4" technology means that batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells, ie. even with a...
The latest generation of the LRP battery of 2022. "GRAPHENE 4.1" technology means that the batteries are lighter, more durable for storage, with a shorter charging time, with a higher performance with less electrical resistance between the cells, i.e....
The new 2023/2024 RUDDOG Racing LiPo kits are made from the latest generation of high quality Hi-Volt silicon-graphene cells. This made it possible to achieve further improvements in terms of internal resistance and capacitance. This is reflected in a...
Team Corally VOLTAX HiVolt version for real racers with 4200mAh capacity in LCG Shorty Hardcase version. Dimensions: 95x47x22mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 175-189g
Obrázek
Last items in stock
Team Corally VOLTAX HiVolt version for real racers with 4200mAh capacity in Shorty LCG Hardcase version. Dimensions: 95x47x22mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 170-184g
Team Corally X-CELERATED version for beginners and recreational racers with a capacity of 5000mAh in Shorty Hardcase version. Dimensions: 95x47x25mm, charging current max. 3C/12.6Amp., G4 power connector, G2 balance connector, Weight: 207g