Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek DB
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek

SWORKz S35-4 1/8 PRO 4WD Off-Road Racing Buggy kit

SW910035
SWorkz
Kit of a top buggy racing chassis with 4WD drive. Model without electronics and RC kit.
More info
In stock - main warehouse: 1 pcs
Recommended retail price
630.54 €
Your price with VAT
()
521.10 €
Price without VAT
521.10 €

  • Did you find a better price?
  • Did you find a better price?

    * Required fields

    We will reply as soon as possible, usually within a few hours.

    By submitting the form you agree to the processing of your personal data (read)

     

     

    Express delivery

     

    Large selection of carriers

     

    Satisfaction guarantee

     

    S35-4 Nitro Buggy Kit (SW910035) - Donuts Racing

    SWORKz S35-4 1/8 Nitro is a real racing chassis . The car's geometry provides optimized cornering speed and improves handling and maximum traction compared to its predecessor .

    The S35-4 is equipped with an anodized and lightweight T7075 aluminum chassis with a wide layout , which has been tested by our factory pilots for a long time to guarantee the best performance. Also included are brand new HET differentials that provide much better traction.

    The new S35-4 comes with a lower front and rear shock absorber layout and the shock absorber design is adapted to the new optimized layout. Fixed spring plates prevent their loss.

    The steering geometry with the new Acckerman and control boards gives the driver a feeling of complete control over the S35-4. Thanks to the converging plates, which now contain square inserts, you can adjust the geometry of your SWORKz S35-4 to suit every track and surface shape.

    SWORKz S35-4 1/8 Nitro Competition Buggy Kit SW910035

    The lower arms at the front and rear are made of a newly developed composite material and exactly match the new chassis geometry. The side protective plastics have been redesigned in the same way.

    Thanks to the new lightweight rear wing bracket, you can adjust the position and its angle to achieve a perfect track balance for your SWORKz S35-4. The new body has been improved and works perfectly aerodynamically with the rear wing.

    Another new development in the SWORKz S35-4 is a completely new rear hub . The composite material in combination with carbon plates gives you a variety of settings. The newly developed composite material works perfectly with HET differentials and ensures maximum traction.


    sworkz-s35-4-1-8-pro-nitro-buggy-kit.jpg

    There are many other small changes and clever ideas in the new SWORKz S35-4 that make the car a real winner. The secret of a modern race car is the ability to customize the settings for each surface for top pilots, but also to have a standard setting that works on most hobby pilot tracks. SWORKz S35-4 has these two features  brought to perfection. When designing the car, SWORKz's development team focused on using materials that meet the highest quality standards. In the S35-4 set you will find only 100% SWORKz quality.

    News:

    · New hard anodized lightweight aluminum chassis T7075

    · New wide chassis design

    · New lower shock absorber brackets

    · New shorter damper bodies

    · New short shock absorber axes

    · New shock absorber caps

    · New shorter front springs

    · New fixed shock absorber bracket

    · New 3mm updated rear shock absorber pins

    · New ackerman board

    · New management system

    · New servo saver

    · New steering balls

    · New control boards

    · New light wing holder

    · New side guards

    · New lower front and rear arms

    · New front and rear body pillars

    · New composite rear hub with carbon plates

    · New more adjustable ball system for the rear upper arms

    · New aerodynamic optimized body

    · 3 HET differentials

    · 2 front chassis reinforcements

    · Black racing springs

    · Adjustable sash position

    · Adjustable sash angle

    · More positions for better chassis import

    · Reinforced areas around the downstop

    · Optimized composite material

    · Aluminum parts made of T7075

    Specifications

    • Length: 530 mm
    • Width: 308 mm
    • Height: 220 mm
    • Clear height: 65 mm
    • Wheelbase: 325-330 mm
    • Wheelbase: P: 302 mm / Z: 306 mm
    • Gear ratio: Stř .: 46 / 15z, P / Z: 43 / 13z
    • Weight: 3230 g (ready to race)

    Obrázek
    Last items in stock
    Other

    Engine caps, 3 pcs.

    Ultimate Racing
    UR1133
    Bags and Packaging

    HOBBYTECH transport bag for 1/8 Buggy

    HOBBYTECH
    HT-504010
    Dimensions of the complete bag: 330x660x200mm.
    Other

    KAVAN screw lock - blue 10ml

    Kavan
    KAV56.9970.CZ
    Means for securing metal-to-metal screw joints of sizes up to M12 against loosening by vibrations - blue, mechanically disassembled with ordinary tools. Packaging: 10 ml bottle.
    Other

    KAVAN screw lock - blue 10ml

    Kavan
    KAV56.9970.DE
    Means for securing metal-to-metal screw joints of sizes up to M12 against loosening by vibrations - blue, mechanically disassembled with ordinary tools. Packaging: 10 ml bottle.
    Other

    KAVAN screw lock - blue 10ml

    Kavan
    KAV56.9970.EN
    Means for securing metal-to-metal screw joints of sizes up to M12 against loosening by vibrations - blue, mechanically disassembled with ordinary tools. Packaging: 10 ml bottle.
    Obrázek
    Last items in stock
    Additives and special products

    LRP After run oil 60ml

    LRP Electronic
    L37910
    metric

    MIBO Allen screwdriver 1.5mm

    MIBO
    MB-7511
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    metric

    MIBO Allen screwdriver 2.0mm

    MIBO
    MB-7512
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    metric

    MIBO Allen screwdriver 3.0mm

    MIBO
    MB-7513
    MIBO Allen screwdriver with a light carbon handle and a very hard tip. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    Other

    MIBO Aluminum tool stand

    MIBO
    MB-7501
    MIBO aluminum stand for 6 pcs screwdrivers, 4 pcs electric screwdriver bits and mobile phone. Including compartments for storing parts, a screw gauge and holes for soldering XT60 and 2, 3.5, 4 and 5mm bullet connectors.
    Springs and dampers

    MIBO Electric Bubble Remover - 1/10 & 1/8 Offroad

    MIBO
    MB-7202
    Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 15.6 and 19mm shock absorber plates, 1/10 and 1/8 differential mount. Including strong packaging for transport.
    Springs and dampers

    MIBO Electric Bubble Remover - 1/10 Onroad & Offroad

    MIBO
    MB-7201
    Electric vacuum pump for removing air bubbles from shock absorber and differential oil. 5-8.4V power supply, 14.8 and 15.6mm damper plates, 1/10 differential mount. Including strong packaging for transport.
    Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and 1.5mm, 2.0mm, 5.5mm and 7.0mm bits.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and a 2.0 mm Allen bit.
    Obrázek
    Last items in stock
    MIBO lightweight black carbon handle with 3mm diameter hole. Suitable for 1.5mm and 2.0mm hex, file tip and other bits with 3mm diameter.
    MIBO lightweight black carbon handle with 4mm diameter hole. Suitable for 3.0mm hex and other bits with 4mm diameter.
    Other

    MIBO Screwdriver set

    MIBO
    MB-7802
    The set contains black screwdrivers with a carbon handle in sizes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket).
    The set includes 1.5, 2.0, 3.0mm hex (hex) and 5.5, 7.0mm nut (socket) black screwdrivers with a carbon handle, and an aluminum stand for 6 screwdrivers, 4 electric screwdriver bits and a mobile phone. Including compartments for storing parts, gauge w
    Obrázek Obrázek 2
    Last items in stock
    Socket

    MIBO Socket screwdriver 7.0mm

    MIBO
    MB-7612
    MIBO socket screwdriver with a light carbon handle. Black handle + black tip. The size of the wrench is marked on the aluminum insert of the handle.
    Obrázek Obrázek 2
    Last items in stock
    Bags and Packaging

    RUDDOG Car Bag - 1/8 Off Road Buggy and 1/10 Truck

    RUDDOG
    RP-0404
    The bag fits for 1/8 Off Raod Buggy and 1/10 Truck chassis. Dimensions: 450x340x130mm
    Bags and Packaging

    RUDDOG Tools Bag

    RUDDOG
    RP-0401
    Tool bag: Dimensions: 280x230x90mm
    Internal combustion engine preheater 3.0-4.3 cc for RC cars (max. Head diameter 63 mm) for easier starting. The engine preheats to 60-70 ° C in 10 minutes. Power supply 12V (car battery) or three-cell LiPo, safety timer 10 min.
    Obrázek Obrázek 2
    Last items in stock
    SWORKz Premium Copper Grease has many uses in the field of RC cars. This grease adheres very well to rotating parts and is particularly suitable for drive shafts. Recommended especially for CVA and CVD shafts. Tested by our pilots in the races, you...
    Obrázek Obrázek 2
    Last items in stock
    SWORKz Premium Lithium Grease is the perfect lubricant for gearboxes and differential components. Tested by our factory pilots, you will be thrilled too. It comes in 20ml screw-on containers and should not be missing from any RC equipment.
    lubricants

    TEAM CORALLY - Blue ointment, 40g

    Team Corally
    C-82702
    Ideal for lubricating O-rings and seals, reduces friction, silicone-based.
    lubricants

    TEAM CORALLY - Copper ointment, 40g

    Team Corally
    C-82701
    Ideal for lubrication of gears and posts, anti-corrosion protection, extremely reduces friction.
    lubricants

    TEAM CORALLY - Lithium ointment, 40g

    Team Corally
    C-82700
    Ideal for lubricating metal / metal parts such as CVD gimbals and half-axles, water resistant, extremely reduces friction.
    lubricants

    TEFLON ointment, 100g

    Ultimate Racing
    UR0906
    Internal combustion engine preheater 3.0-4.3 cc for RC cars (max. Head diameter 63 mm and height 50 mm) for easier starting.
    Obrázek Obrázek 2
    Last items in stock
    Bags and Packaging

    Transport bag / case for RC transmitters

    Team Corally
    C-90245
    Thanks to the transmitter cover from Team Corally, you can safely carry and store your RC steering wheel set. The cover is made of padded textile, the closure is solved with a zipper, a pocket is sewn
    Bags and Packaging

    Transport bag for RC CARS or its accessories (2x drawer)

    Team Corally
    C-90240
    Transport bag with two drawers for transporting accessories for RC cars or its accessories. The size of the drawer is 30 x 48 x 15 cm, the size of the bag is 54 x 34 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made of plastic...
    Bags and Packaging

    Transport bag for RC CARS or its accessories (3x drawer)

    Team Corally
    C-90241
    Transport bag with two drawers for transporting RC car accessories or its accessories. The dimensions of the drawer are 30 x 48 x 15 cm, the dimensions of the bag are 54 x 51 x 33 cm. The drawers are made of plastic cardboard. Drawer handles are made...
    Cyanoacrylate (instant)

    ZAP CA 14.1g (1/2 oz.) Thin instant glue

    ZAP
    5MB01PT-09
    Top thin instant glue, firm connection 1-5s. Packaging bottle 14 g. Suitable for gluing tires on RC models.
    Cyanoacrylate (instant)

    ZAP CA 56.6g (2oz.) Thin instant glue

    ZAP
    5MB03PT-07
    Top thin instant glue, firm connection 1-5s. Packaging bottle 56 g. Suitable for gluing tires on RC models.
    Obrázek Obrázek 2
    Last items in stock
    SWORKz

    SWORKz antenna caps, 3 pcs.

    SWorkz
    SW420010
    Obrázek Obrázek 2
    Last items in stock
    SWORKz

    SWORKz servo spring, 1 pc.

    SWorkz
    SW115004A
    Tubings

    SILICONE fuel hose color BLACK, 1m

    Ultimate Racing
    UR1108-B
    Length 1m, inner diameter 2.5mm, outer diameter 6.0mm, wall thickness 1.75mm.
    Tubings

    Silicone hose 5/2 mm - red

    Graupner/SJ
    1641.1
    Length 1m, inner diameter 2mm, outer diameter 5mm, wall thickness 1.5mm.
    complete wheels

    B-PIRATE SOFT 1/8, black spoke discs 17mm hex, 2 pcs

    Louise RC
    L-T3126SB
    Complete wheels for 1/8 buggies. Tires suitable for dry and wet conditions, for hard and dusty clay and similar surfaces. Discs for 17mm hex drivers.
    buggy

    Vision clear body - SWORKz S35-3 / S35-4 pre-cut

    Bittydesign
    VIS-SWKS35-3
    The clear body for the OFF ROAD SWORKz S35-3 / S35-4 model has improved flow to achieve higher speed and is covered with a protective foil, made of high quality 1mm polycarbonate (lexan), the package includes camouflage stickers including stickers. The...
    Starting

    202 glow plug for bat.1,7Ah

    Q-model
    8KM8336
    Compact glow plug with case for sub-C size batteries (not included).
    Starting

    202-2 glow plug for 4Ah battery

    Q-model
    8KM8337
    Compact glow plug with case for size D batteries (large monocell) (not included).
    electronic

    Electronic Power Switch

    SKY RC
    3SK6054
    Miniature electronic switch for 4-12 V receiver batteries with NiCd / NiMH and LiPo mode with LED charge status indicator. Protection against deep discharge in LiPo mode. Ideal especially for RC cars, incl. "chip" holder for wheel counting.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Allen screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    SCRAP

    Kavan Car RS 16% Off Road Nitro 3l

    Kavan
    KAV54.016.3
    Heating fuel for RC cars (1/8 Off-Road) specially developed for racing driving with a composition optimized for extremely high performance. Contains 9% mixture of synthetic and castor oil and 16% nitromethane. Packaging 3 liters.
    SCRAP

    Kavan Car RS 16% Off Road Nitro 5l

    Kavan
    KAV54.016.5
    Heating fuel for RC cars (1/8 Off-Road) specially developed for racing driving with a composition optimized for extremely high performance. Contains 9% mixture of synthetic and castor oil and 16% nitromethane. 5 liter packaging.
    SCRAP

    Kavan Car RS 25% nitro 3l

    Kavan
    KAV54.003.3
    Heating fuel for RC cars specially developed for racing driving with a composition optimized for extremely high performance. Contains 9% mixture of synthetic and castor oil and 25% nitromethane. Packaging 3 liters.
    SCRAP

    Kavan Car RS 25% nitro 5l

    Kavan
    KAV54.003.5
    Heating fuel for RC cars specially developed for racing driving with a composition optimized for extremely high performance. Contains 9% mixture of synthetic and castor oil and 25% nitromethane. 5 liter packaging.
    KAVAN flat screwdriver with ergonomic non-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    KAVAN Phillips screwdriver with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    Socket

    KAVAN socket wrench 5.5mm

    Kavan
    KAV758
    KAVAN socket wrench with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    Socket

    KAVAN socket wrench 7.0mm

    Kavan
    KAV759
    KAVAN socket wrench with ergonomic anti-slip and very light plastic handle. The size of the key is marked on the aluminum insert of the handle.
    Obrázek Obrázek 2
    Last items in stock
    Team Corally starting box for combustion RC car models 1: 8. Powerful, affordable, reliable and thoroughly certified by Corally team drivers. Stiff or tight motors are no problem for the start box, as the drive is solved by two DC motors 7
    Obrázek Obrázek 2
    Last items in stock
    Fuel bottles

    Quick refueling STICK, 175ml

    Ultimate Racing
    UR1414
    Thanks to the high-speed STICK from the Ultimate Racing company, you can refuel with LE MANS, DTM, F1 mechanics ....
    Obrázek
    Last items in stock
    sets

    RC CAR / CAR tools, set, 16 pcs.

    Team Corally
    C-16250
    Sixteen-piece set of tools and accessories for 1/8 Nitro or Elektro models.
    Obrázek Obrázek 2
    Last items in stock
    Suitable for NiMH, LiPo and LiIon sets, at 6V to 10 Amps load possible, at 7.4V to 8 Amps load possible, Weight 12.3g, Dimensions 29.4x19.0x12.3mm.
    Obrázek Obrázek 2
    Last items in stock
    Suitable for NiMH, LiPo and LiIon kits. Input voltage 5 - 10 V, maximum continuous current 8 A, maximum short-term current 14 A, own current consumption 1 - 10 mA (depending on the number of lit segments), weight 10 g.
    Obrázek
    Last items in stock
    starters car

    Starter box 1/8 Off Road including 2x 7.4V 4500mAh LiPo kit

    Ultimate Racing
    UR4501C2
    Ultimate racing starting box 1/8 Off Road is primarily intended for starting most car models in the 1/8 Off-Raod scale.
    Obrázek Obrázek 2
    Last items in stock
    starters car

    Starting box 1/8 Off Road

    Ultimate Racing
    UR4501
    Obrázek Obrázek 2
    Last items in stock
    The bag contains 2 separate sections that can be closed with a zipper. One with tools and one empty for other assembly or service equipment. Dimensions: 290x260x120mm, separate position with tools height 40mm, free position height 80mm.
    Futaba F-4G and T-FHSS with telemetry/T-FHSS SR/S-FHSS/Mini-Z without telemetry 10-channel computer steering wheel 2.4GHz RC kit for racing model cars and boats. HVGA touch screen, 6 digi trims, 8 switches, 1 knob/switch, memory for 40 models +
    Futaba T-FHSS Telemetry/S-FHSS/FHSS 4-Channel Computerized RC Kit for Competition Model Cars and Boats. 2 lever controls, 4 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With R304SB...
    Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
    Futaba T-FHSS Telemetry/T-FHSS SR/S-FHSS 4 Channel Computerized Steering Wheel RC Kit for Competition Model Cars and Boats. 5 digi trims, 2 switches, 1 knob, memory for 40 models, advanced program setting of functions (incl. ABS) and mixes. With...
    Obrázek Obrázek 2
    Last items in stock
    Sport

    M-17 2.4GHz with RX-493i receiver

    SANWA
    S101A32483A
    Four Channel Steering Wheel RC Kit 2.4GHz FHSS. Set includes: M17 transmitter, RX-493i receiver.
    Hobby

    MT-R 2.4GHz with RX-493i receiver

    SANWA
    S101A32773A
    4-channel telemetry kit with FHSS-5 transmission.
    Hobby

    RC8X transmitter with R8FG receiver

    RadioLink
    1RL0120
    Eight-channel FHSS 2.4GHz steering wheel RC kit for car and boat models. 4 digital trims, rotary knob, 5 pushbutton switches assignable for channels 3-8 or mixes. Memory for 200 models, settings for mixes, double deflections, endpoints, subtrims, expo
    Digital

    Futaba HPS-CB500 (25.5kg 0.06s / 60 °)

    FUTABA
    FUT5102687
    Very powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for car models. Support for S.BUS, S.BUS2 and SR mode. Power supply 5.0-8.4V. Thrust 20.6kg.cm, speed 0.07s / 60 ° at 6.0V, thrust 25.5kg.cm, speed 0.06s...
    Digital

    Futaba HPS-CB701 (49kg 0.075s/60°)

    FUTABA
    FUT5102698
    Monstrously powerful digital HV standard servo with BLS motor (with hall sensors) and ball bearings ideal for 1:8 cars. Support S.BUS, S.BUS2, SR and UR mode. Power supply 5.0-8.4V. Thrust 42kg.cm, speed 0.09s/60° at 6.0V, thrust 49kg.cm, speed...
    Very strong and fast programmable digital standard servo 83g with AC (brushless) motor, with steel gears and a wide range of supply voltage 4.8-8.4V, 3xBB, ideal for large model airplanes, RC cars 1:8 and 1:10 etc. .Thrust 28.0kg.cm, speed 0,
    Digital

    GO-1280MG (0.085s/60°, 40kg.cm)

    Kavan
    KAV20.1280MG
    Very strong and fast programmable digital standard servo 79g with AC (brushless) motor, with magnetic encoder, with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for 1:8 and 1:10 off-road RC cars etc. Thrust 27.0kg.cm,
    Extremely powerful and fast programmable waterproof and dustproof (IP67) digital standard servo 83g with AC (brushless) motor, with magnetic encoder, with steel gears and wide range of supply voltage 4.8-8.4V, 3xBB, ideal for off-road RC cars
    Obrázek
    Last items in stock
    Digital programmable HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 17.9 / 21.1kg at 6.0 / 7.4V and 0.11 / 0.14s at 6.0 / 7.4V, weight 72.0g, 40.5x20.5x38.7mm. Operating voltage 4.8 - 8.4V.
    Obrázek
    Last items in stock
    Digital programmable HiVolt standard servo with Brushless motor and metal gears, 2x ball bearing, 14.0 / 17.3kg at 6.0 / 7.4V and 0.09 / 0.11s at 6.0 / 7.4V , weight 72.0g, 40.5x20.5x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 25.0/32.0/45kg at 6.0/7.4/8.4V and 0.15/0.12/0.11s on 6.0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 15.0/20.0/25.0kg at 6.0/7.4/8.4V and 0.085/0.065/0.055s at 6.0/ 7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 23.0/28.0/35.0kg at 6.0/7.4/8.4V and 0.12/0.095/0.085s at 6, 0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Obrázek
    Last items in stock
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 2x ball bearing, 20.0/25.0/30.0kg at 6.0/7.4/8.4V and 0.10/0.08/0.07s for 6.0/7.4/8.4V, weight 69.0g, 40.3x20.2x38.5mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 40.0/50.0/60kg at 6.0/7.4/8.4V and 0.17/0.14/0.12s on 6.0/7.4/8.4V, weight 83.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 45.0/55.0/70kg at 6.0/7.4/8.4V and 0.16/0.13/0.11s on 6.0/7.4/8.4V, weight 81.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 27.0/36.0/50kg at 6.0/7.4/8.4V and 0.085/0.07/0.055s at 6.0 /7.4/8.4V, weight 79.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 50/65/75kg at 6.0/7.4/8.4V and 0.16/0.13/0.11s at 6, 0/7.4/8.4V, weight 72.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 30.0/35.0kg at 7.4/8.4V and 0.08/0.07s at 7.4/8.4V, weight 63.0g , 40.3x20.2x37.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with coreless motor and metal gears, 2x ball bearing, 35.0/40.0kg at 7.4/8.4V and 0.10/0.09s at 7.4/8.4V, weight 63.0g , 40.3x20.2x37.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt standard servo with Coreless motor and metal gears, 3x ball bearing, 38.0/45.0/55kg at 6.0/7.4/8.4V and 0.17/0.14/0.12s at 6.0 /7.4/8.4V, weight 76.0g, 40.3x20.2x38.2mm. Operating voltage 4.8 - 8.4V.
    Digital HiVolt WATERPROOF standard servo with Brushless (AC) motor and metal gears, 3x ball bearing, 45.0/55.0/70.0kg at 6.0/7.4/8.4V and 0.16/0.13/0 ,11s at 6.0/7.4/8.4V, weight 81.0g, 40.3x20.2x38.7mm. Operating voltage 4.8 - 8.4V.
    for cars

    OS MAX B21 combo with exhaust

    OS MAX
    OS1EG01
    OS MAX-B 21 is a 3.49cc internal combustion engine suitable for 1/8 Buggy and 1/8 GT models. Power 2.60 PS at 34,000 rpm, speed range is 4,000 - 41,000 rpm, Turbo spark plug, weight 361 g.
    for cars

    OS SPEED B21 ADAM DRAKE 3 engine itself

    OS MAX
    OS1CJ00
    OS SPEED B21 ADAM DRAKE 3 is a 1/8 Off Road spal. 3.49cc engine suitable for 1/8 Off Road models. Power 2.65 PS at 34,000 rpm, speed range is 4,000 - 42,000 rpm, Turbo spark plug, weight 350g (without silencer).
    OS SPEED B21 RONDA DRAKE 2 is a 1/8 Off Road spal. 3.49cc engine suitable for 1/8 Off Road models. Power 2.65 PS at 34,000 rpm, speed range is 4,000 - 42,000 rpm, Turbo spark plug, weight 350g (without silencer).
    OS SPEED B21 RONDA DRAKE 2 is a 1/8 Off Road spal. 3.49cc engine suitable for 1/8 Off Road models. Power 2.65 PS at 34,000 rpm, speed range is 4,000 - 42,000 rpm, Turbo spark plug, weight 350g (without silencer).