iSDT ESC 70 controller 70A
Express delivery
Large selection of carriers
Satisfaction guarantee
Programmable electronic controller for DC motors for 1:10 car models and ships with 540, 550, 600 series electric motors. The use of modern MOSFET power transistors and an aluminum box with cooling fins ensures high current carrying capacity with small dimensions and low weight. The powerful BEC switched power stabilizer built into the controller guarantees a reliable power supply to the steering servo or rudder. You can easily and quickly program the controller via a Bluetooth connection with the ISD Go application on your smartphone.
DESCRIPTION AND FUNCTIONS OF THE CONTROLLER
- Programmable via Bluetooth connection with ISD Go application
- Electronic switch with Bluetooth module
- BEC power stabilizer with a load capacity of up to 3 A and an adjustable output voltage of 5.0-7.5 V
- Power supply: 2-3S LiPo / 6-8 NiXX
- Protections: voltage protection, overload, loss of control signal, thermal protection
- Driving modes: Forward / Brake, Forward / Brake / Reverse, Forward / Reverse
- Active resistance brake for rock crawlers in Forward / Reverse mode allows you to keep the car on a steep slope
- Gas control range calibration with neutral bandwidth setting
- Splash water resistant (IP65 standard)
PROGRAMMABLE FUNCTIONS
- Driving modes: Forward / Brake / Reverse, Forward / Brake, Forward / Reverse)
- Battery type: LiPo / NiMH / Cd
- Number of articles: 2S / 6-8čl.
- Voltage protection: automatic / 5.0-12.0 V
- BEC output voltage: adjustable 5.0-7.5 V in 0.1 V increments
- Direction of motor rotation: clockwise / counterclockwise
- Switching frequency: 1-20 kHz
- Run: 10 levels
- Braking effect: 10 levels
- Active resistance brake effect: Off / 1-20
- Active brake on / off
- Gas curve: 4 selectable waveforms incl. adjustable exponential curves
- Brake curve: 4 selectable waveforms incl. adjustable exponential curves
- Reset to factory default settings
The controller set includes: ESC 70 controller, switch / Bluetooth module, throttle servo cable, 1 pair of motor connectors, instructions.
Use | Car, Ship |
Type | direct current |
Continuous current [A] | 70 |
Max. peak current [A] | 120 |
NiMH [art] | 6 - 8 |
Li-Pol [Art] | 2 - 3 |
BEC voltage [V] | 5 - 7.5 |
BEC current [A] | 3 |
Length [mm] | 38.6 |
Width [mm] | 31.6 |
Height [mm] | 17.2 |
Weight [g] | 53.5 |
Regulation | bidirectional |
Brake | Yes |
Input for sensors | No |
Programmable | Yes |