Servo Direct Connect is a connection cable that allows you to power the servo directly from an external BEC. Easy connection without soldering, replaces the classic solution via Y-cable. Package inclu
Switched step-down voltage regulator enabling the use of 4.8 V servos in on-board electronics with a higher supply voltage of 6.6-7.4V (2S LiFe, 2S LiPo). Connects between the receiver (or gyro) and the servo. For powering 1 servo up to 10 kg/cm...
Switched BEC designed for large / giant models of helicopters and aircraft. Constant current 25A, peak 50A. Input voltage 3-18S Lipol. Adjustable output voltage 5.2V / 6.0V / 7.4V / 8.4V. Dimensions 50x40.2x17.6mm. Weight 74g.
Programmable switching WATER RESISTANT stabilized BEC power supply for receiver and servos. This is necessary wherever a higher consumption of more servers is expected. Power up to 12 cells LiPol output current max. 15A.
Programmable switched stabilized BEC power supply for receiver and servos. This is necessary wherever a higher consumption of more servos is expected or when using more than a 3-cell LiPol battery. Po
Adjustable source BEC Spektrum 10A 2-6S , to reduce the voltage from the battery for the receiver, servos and other components. BEC is necessary wherever a higher current consumption is expected, for example, powerful servos. Setting the output voltage
A programmable switching stabilized BEC power supply for the receiver and servos is needed wherever higher consumption and a larger number of servos are expected. Power supply up to 12 cells LiPol, output current max. 14A. It is used where the...
Traxxas BEC source for receiver and servos. The source is necessary where a higher consumption of servos is expected. The power supply must be installed using a stronger, tuning servo.
Traxxas BEC source for receiver and servos. The source is necessary where a higher consumption of servos is expected. The kit includes accessories for mounting on the chassis. The power supply must be
Programmable switched stabilized BEC power supply for receiver and servos. This is necessary wherever higher servo consumption is expected or when using more than 3 LiPol batteries. Power supply 2 - 6
Waterproof and dustproof (IP67) switched BEC designed for models of off-road cars, boats, etc. Continuous current 10A, peak 15A. Input voltage 6-25.2V (2-6S LiPo). Adjustable output voltage 6.0V/7.4V/8.4V. Dimensions 45x20x16.2mm. Weight 34g.
DC ascending converter 3.7 V / 6.0 V for powering the receiver and servos in models with 1S LiPo drive battery - RC cars 1:12, etc. Powered by 1S LiPo (or 3-4 NiMH cells), output 6.0 V, load capacity 3 A permanently, 6 A peak. Weight 10.2 g.
Switching power supply stabilizer BEC 6A (10A peak) for powering the receiver and servos. Supply voltage 6-25V (2-6s LiPo), output voltage switchable 5.0, 5.5 or 6.0V. Weight 18g, dimensions 45x23x10m
Switched BEC designed primarily for aircraft models. Continuous current 5A, peak 15A. Input voltage 6-33.6V (2-8S LiPo). Adjustable output voltage 5.0V/6.0V/7.4V. Dimensions 50x17x10mm. Weight 21g.
Switching power supply stabilizer BEC 3A (5A peak) for powering the receiver and servos. Supply voltage 6-25V (2-6s LiPo), output voltage switchable 5.0 or 6.0V. Weight 7g, dimensions 30x9x6mm.