Express delivery
Large selection of carriers
Satisfaction guarantee
The package contains finished complete parts of the Eratix 3D FF airplane RC model, with installed components: AC motor 2405-1200KV 14-P, Spektrum controller Smart Avian 15A IC2, Sub-Micro Digital Servo 8g SA346, Sub-Micro Digital Servo 9g Metal Gear A347, instructions in Czech, manual EN, DE, FR, IT.
The Eratix 3D FF 860mm PNP indoor RC model airplane can be assembled quickly and easily, and after adding your receiver and battery and transmitter, you will be ready to fly. The model is a typical representative of indoor aircraft with flat parts made of EPP, the servos, motor and controller are already installed from the factory, you do not need glue for assembly. The recommended battery is LiPol 600 - 850mAh 3S 11.1V with IC2 connector.
Indoor model airplanes were very popular at the beginning of the new millennium and could be easily and cheaply made from Depron EPS board material. Today, the technology of sports competition specials is completely different, the frame of competition specials is ultra-light and the cover consists of micro foils. The flight technique is very specific and the flight characteristics cannot be compared with anything in the world of aviation. The new Eratix 3D FF model has taken a more customer-friendly path, the concept is closer to regular airplanes, and the model can be operated even in an outdoor windless environment and have fun or practice aerobatics practically anywhere. The manufacturer has made the work of pilots as easy as possible, you only use a few small screws to assemble, add your receiver and you are done. You don't need glue or tape, just a small Phillips screwdriver to assemble!
The lightweight but extremely durable frame of the model is made of durable EPP foam material and the individual parts have factory-installed electronics. The 3S LiPol compatible AC motor is tuned with the exclusive Spektrum Avian Smart controller. If you add a Spektrum receiver, you can use SMART telemetry data.
The Eratix 3D FF Plug-N-Play (PNP) RC model airplane comes with the AC motor, controller and servos installed, ready to connect to a compatible receiver of your choice (sold separately). You will also refill your transmitter and batteries. Install the receiver, build the model and fly!
The Eratix 3D FF features an exclusive Spektrum™ Avian™ Smart controller that can provide you with a range of real-time power system-related telemetry data, including motor speed, current, battery voltage and more – with Smarti other mainstream batteries. And this through compatible receivers and transmitters, equipped with Spektrum AirWare™ (including DX6e and 8e, DX6 G2/3 and 8 G2, DX9, NX6, 8 and 10, iX12, iX14, iX20 and others).
The installed AC motor with optimal parameters provides the model with more than enough thrust, for unlimited vertical and 3D performance with LiPol 3S batteries! Use a 600mAh LiPol battery to keep weight low or up to an 850mAh LiPol battery for longer flight time.
Like other indoor board models, the Eratix 3D FF is capable of slow flight, sporty basic aerobatics and even aggressive 3D flying - all in one flight! It offers relaxed flying as well as an adrenaline-filled flight experience, intermediate to experienced pilots will appreciate whether flying indoors in gyms or outdoors on meadows, parks, sports fields, etc.
Unlike other similar flat foam models that are sold as kits without drive and control components, the Eratix 3D FF comes factory assembled with the motor, controller and servos installed (PNP version). All you have to do is complete the quick and easy final assembly with screws, snaps - no glue, tape or special tools, you'll complete your receiver - and you'll be ready to fly in less time than you need to charge your battery!
Thanks to the construction of carbon fiber and composite reinforced EPP with high density, it was possible to produce a light, but stiff and durable airframe. In the unfortunate event that you damage any parts of the airframe, the repair is relatively easy. A wide range of spare parts is also available.
To put it into operation, you need to add an RC kit, a 600 - 850mAh 3S 11.1V LiPol drive battery with an IC2 connector and a compatible LiPol charger.
To pair the BNF version model, we recommend modern SPEKTRUM programmable transmitters:
To power the model, we recommend a driving LiPol battery with 3 cells (11.1 V) and an IC2 connector Spektrum LiPo 11.1V 600mAh 50C IC2
Protective packaging is intended to limit the risk associated with the transport and charging of accumulators. LiPo accumulators can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for a long driving time. Conversely, the LiPo battery is especially susceptible to mechanical damage.
