Losi DBXL 2.0 1: 5 4WD RTR Icon

Durable chassis

The chassis plate is made of 4mm high strength aluminum 6061-T6, which has been machined for weight reduction and maximum rigidity. The components are arranged to achieve an ideal weight distribution. Easy refueling, battery replacement and service is ensured by a folding body with a durable frame construction.

2-stroke petrol engine Zenoah ® G320 32 ccm

The new larger engine with a displacement of 32 cc will provide more horsepower and more fun! The engine is started using a traction starter, has a centrifugal clutch and simple and economical operation. A larger air filter improves suction and adds performance.

New cardan shaft horseshoes

The center drive shaft horseshoes have been redesigned to now have a ring design such as 5IVE-T, which minimizes the possibility of drive failure .

5 mm half-axle pins

Larger 5 mm half-axle pins withstand increased engine power and safely transfer power to the wheels. At the same time, the pins are still replaceable.

Fixed differential bed

The modified differential bed is now fixed with screws. The gears thus have a safe and precise operation even during a demanding ride full of rebounds, etc.

Steering and servo saver

The new steering system with a powerful integrated servo-saver and a metal servo lever with two rods, can withstand even demanding racing. The servo-saver safely absorbs shocks to protect the servo gears.

Aluminum shock absorber towers

The 6 mm thick aluminum front and rear shock absorber towers are not only extremely durable and light at the same time, but they also allow you to tune the driving characteristics thanks to the pre-drilled holes for mounting the shock absorber .

Aluminum shock absorbers filled with oil

Giant front and rear aluminum shock absorbers with robust piston rods that are fully dimensioned for 1: 5 car loads. Large amounts of oil ensure realistic shock absorber behavior. The spring preload can be easily adjusted using the nut on the damper body.

Servo bed

Servo bed allows you to operate single or double Maxi servos and also simplifies the accelerator / brake connection and simplifies adjustment .

Stabilizers

Axle stabilizers effectively prevent the model from tilting when cornering and improve driving characteristics.

Chassis reinforcements

New double rear chassis struts and torsion bar increase chassis rigidity and durability .

Engine bed

The durable chassis plate also forms a bed for the engine. Mounting holes allow precise adjustment of the motor position and inter-tooth clearance.

Fuel tank

The new larger fuel tank with a capacity of 800 cc, provides longer operating time. The tank is fitted with a standard lid. .

Center differential and brake mounting

The new center differential mounting allows quick and easy adjustment of the disc brakes. The effectiveness of the front and rear brakes can be set independently.

Gas servos and control

The model is equipped with two high-performance servos with metal gears. One servo is designed for turning the wheels, the other controls the throttle, respectively the accelerator and brake.

Transmitter Spectrum SLT3

The 3-channel Spektrum SLT3 steering wheel transmitter operating in the 2.4 GHz band is compatible with the SLT protocol. The light weight of the Spectrum SLT3 transmitter allows you to hold without fatigue. The steering wheel is covered with a foam rim for a firm grip. The layout of the controls is practical and intuitive - all controls are positioned so that they are quickly accessible when needed. A secure loop is available for fastening to the strap.

• 
  
• 3-channel steering wheel RC set Spektrum SLT for reliable control
  
• Proven design for comfortable grip without fatigue
  
• Possibilities of limiting the maximum deviations of the control channel and gas
  
• Double steering channel deflections and 50%, 75% and 100% engine power limiter
  
• You can use the third channel for additional devices, eg for sound modules.
  

Spectrum SR315 DSMR Sport

The new generation SR315 DSMR Sport receiver in a micro design weighs only 6 g. Choice of SmartSafe ™ or "Gas" Failsafe, button pairing. DSMR technology ensures full range and fast receiver response.

• 
  
• Box design with rounded corners and low weight
  
• Thanks to the pairing button, you do not need a pairing connector
  
• SmartSafe ™ Failsafe and "Gas Mode" available when pairing
  
• DSMR secure modulation protocol and 5.5ms high frame rate
  
• Compatible with SMART telemetry, (compatible DMSR transmitter with SPEKTRUM dashboard application)
  

Charger for RX battery

To charge the receiver 2S LiPo battery IC3, which is included in the package, it is necessary to add a charger.

• 
  
• Charger with mains power supply Spektrum Smart S150 with one 1x50W output.
  
• Mains charger Spektrum Smart S1100 with one 1x100W output.
  
• Mains charger Spektrum Smart S2100 with two outputs 2x 100 W.
  

To connect the battery to the above-mentioned chargers, you need an IC5 / IC3 charging adapter.

• 
  
• Mains charger Spektrum Smart G2 S155 1x55W AC with one output 55W .
  
• High-performance mains charger Spektrum Smart G2 S1400 1x400W AC with one 400W output.
  
• High-performance mains charger Spektrum Smart G2 S2200 2x200W AC with two 2x200W outputs.
  

Accessories for normal operation

For normal RC car operation, you need tire glue, bolt glue, a tool kit and silicone shock absorber oil. From our range we recommend an affordable set of tools for RC cars.

The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. We recommend Robitronic Tire Glue from our offer - see recommended accessories.

Sometimes it is necessary to add silicone oil to the model's shock absorbers and change the oil in the differentials. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. Repair kits or individual parts are supplied for these cases. From our range of silicone oils, we recommend TLR (Team Losi Racing) silicone oils, see recommended accessories.

Screw glue is required for routine maintenance. Screws screwed into the metal material (eg screws in the motor, set screw in the pinion) must be secured against loosening with this adhesive.

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for long travel times. On the contrary, the LiPo battery is prone to mechanical damage.