Proboat Sonicwake 24" RTR blue

Durable hull

The V-shaped ABS hull cuts the water smoothly and ensures a smooth ride even in the most demanding conditions. The deck cover is firmly secured with a single rotating screw with a bayonet mechanism. A double foam seal around the perimeter of the cover effectively prevents water from entering the hull. In the event that water does enter the hull, it can be easily drained through the drain hole with a rubber plug.

Automatic rotation

Drive at full throttle without any worries. If the model capsizes, the flood chamber will fill with water in a moment and the boat will turn back on its own so you can get going and continue the fun.

Battery and charger

You don't have to worry about choosing the right battery and charger. The Spektrum LiPo 3S 3200mAh battery and USB-C charger are included in the package. Charging is also very easy and safe, there is no need to set anything, everything is taken care of automatically by Smart. You can power the USB-C charger from any USB-C output or USB-C adapter (phone charger).

Brushless motor

The factory-installed brushless drive consists of a Spektrum 3542 2500Kv marine motor with a Spektrum 50A ESC. The components are water-cooled to maintain optimal operating temperatures.

Tilting rudder

In the event of an accident, the first thing to be damaged is the rudder. That is why the Sonicwake is equipped with a folding rudder that bends when hitting a shallow or bank. There is no need to replace the shear bolts, with this model you just need to put the rudder back and tighten the bolts.

SLT2 transmitter

The included 2-channel SLT2 2.4GHz transmitter offers reliable control and all the necessary functions. These allow you to adjust the throttle and steering trim, servo travel range and throttle travel limit. The layout of the controls on the transmitter is intuitive and very ergonomic.

SSL battery holder

The boat stand can be used to display or work on your Proboat Sonicwake 24" Deep-V. The stand also protects the rudder and hull from damage.

Stand

The SSL (Strap, Slide, Lock) holder, which combines a slide-out compartment with battery fastening using a strap, ensures quick and easy battery replacement even in small spaces on the boat.

USB source

We recommend a powerful 65W USB-C power adapter to power the USB-C charger. With this power supply, you will achieve significantly shorter charging times compared to classic 5V USB sources (such as phone chargers).

Recommended LiPo batteries

To power the RC boat model, we recommend a high-quality 3S LiPo battery with a capacity of 3200 mAh.

• 
  
• Spektrum Smart LiPo 11.1V 3200mAh 3S 30C replacement battery with IC3 connector and Smart technology.
  

Spektrum batteries with Smart technology currently represent the most modern and safest way to maintain and charge batteries. You can find the benefits of Spektrum Smart technology here.

Recommended chargers for conventional LiPo and Smart batteries

For reduced charging times, wider charging options and the ability to charge Smart and conventional batteries, we recommend:

• 
  
• Spektrum S155 mains charger with one output 1x 55W .
  
• Spektrum S1100 mains charger with one output 1x 100W .
  
• Spektrum S2100 mains charger with one output 2x 100W .
  
• Spektrum S2200 mains charger with two outputs 2x 200W .
  

Accessories for normal boat operation

For normal operation of an RC model boat, you need a special grease for lubricating the ship's shafts. The special composition ensures smooth operation of the shaft in the Teflon tube while maintaining maximum component life. We recommend Marine grease, or Marine grease with a grease nipple.

Protective covers for batteries

Protective packaging is designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can provide high discharge currents and have a large capacity while maintaining small dimensions and low weight. LiPo batteries are particularly susceptible to mechanical damage and therefore need to be carefully protected.