Futaba 26SZ, receiver R7208SB

The latest high-end mid-range 26-channel RC kit using the FASSTest-2.4GHz telemetry transmission system for sports and very advanced recreational modelers and their simple, complex and giant models. The transmitter can also be switched to T-FHSS Air (also telemetric) and S-FHSS transmission modes to use a wide range of Futaba air receivers with and without telemetry.

With the R7208SB receiver included in the kit, you have 8 PWM channels for classic servos (or up to 26 channels when using 2 or 3 receiver mode) or a full 26 channels via the S.BUS and S.BUS2 buses; as well as telemetry data on the receiver's supply voltage, the voltage of another external (e.g. drive) accumulator and the strength of the signal captured by the receiver. You can obtain additional telemetry data from additional telemetry sensors connected to the S.BUS2 bus.

The T26SZ transmitter, in a cabinet that fits perfectly in the hand, is equipped with precise cross controls with adjustable lock/neutral and tilt angle of the lever; instead of the usual potentiometers, magnetic encoders are fitted, ensuring a long service life and constant parameters. The T26SZ features 8 switches, 4 sliders, 6 digital trims and 2 rotary proportional controls.

A pair of buttons and a large backlit color touch LCD display are used for programming, ensuring easy orientation in the intuitive menu. selected theometric or timer data can be displayed on the auxiliary LCD display on the top of the transmitter. The T26SZ has a memory for 30 models, unlimited expansion via microSD card, and a wide range of advanced mixing functions for aerobatic aircraft, gliders, helicopters and multicopters. In addition to the display of telemetry data on the main and auxiliary displays, a voice output of telemetry is available in the socket for the handset (not included in the kit).

The T26SZ is also equipped with a teacher-student socket and a socket for programming and setting S.BUS servos and gyroscopic systems CGY770/CGY755/CGY760R or GYA553. The USB charging/data socket on the top of the transmitter allows you to use the T26SZ directly as a controller for an RC simulator after connecting to a PC with a USB cable, without the need for an additional USB interface .

A 2S LiPo battery 2000 mAh is used for power, for charging you will need a standard USB charging adapter 5 V/2 A.

FUNCTION

• Transmission system FASSTest 26CH with 24 proportional and 2 switched DG channels , FASSTest 18CH with telemetry (16 proportional + 2 switched channels), super fast FASSTest 12CH (12 channels, telemetry only receiver supply voltage), T-FHSS Air with telemetry (16 proportional and 2 switched channels), S-FHSS 2.4GHz without telemetry (8 proportional channels), CRSF protocol for TBS Crossfire (one-way communication)
• Color backlit LCD touch screen 4.3" for quick and easy programming
• Auxiliary backlit LCD display for displaying telemetry/timer
• Up to 8 flight modes for perfect control of your model in all conditions
• Full telemetry with data transfer from a wide range of sensors with the option of writing to an SD card
• Memory for 30 models, expandable without limits using an SD card
• LiPo transmitter battery 7.4 V 2000 mAh
• Telemetry voice output on the headphone socket (3.5 mm jack)
• Updatable software
• Freely assignable 4 sliding and 2 rotary controls, 8 switches, 6 digital trims
• Precise cross controllers stored in 4 ball bearings with magnetic encoders instead of potentiometers
• Freely adjustable mode of cross controls (to change the mode and adjust the strength of the neutralization springs, it is not necessary to open the transmitter box)
• Teacher-student socket
• A wireless teacher-student module that allows Futaba RC kits working in the T-FHSS Air transmission system to be used as student ones without the need for a cable connection
• Socket for programming S.BUS servos, updating S.BUS2 servo firmware, updating telemetry sensor and receiver firmware (including setting receiver channel mode), setting up DLPH-2 receiver backup systems, setting up CGY770/CGY755/CGY760R and GYA553 gyro systems, or connecting systems TBS Crossfire long-range remote control (CRSF protocol, one-way communication)
• USB data/charge socket for using the transmitter as a control device for an RC simulator on a PC and for charging the transmitter battery with the help of a USB 5 V/2 A mains adapter
• 32MB-2GB microSD card slot (allows model memory expansion, model memory backup, transmitter firmware update, conversion of model data programmed on T14SG, FX-22, T12K transmitters, use of model data programmed on T16SZ, T16IZ, T16IZ SUPER, T18SZ transmitters, FX-32 and FX-36)
• Model names with up to 15 characters
• Subtrims with an added balancer function - the existing Subtrim function is supplemented with the possibility of setting the entire course of deviations along up to a 17-point curve for precise coordination of the movement of several servos jointly controlling one rudder (one servo servo is selected as a reference and the movement of the others is fine-tuned relative to it)
• Reversing the direction of servo deflections
• Setting end points and deflection limits
• Servo speed setting
• Data reset
• Fail-safe emergency deflections
• Servo speed setting
• Double deflections
• Setting the course of deviations after 2 exponential curves or 17-point curves.
• Freely programmable mixes (10 mixes for each flight mode)
• Engine shutdown
• Safe idle
• Logically linked switches
• User menu (allows you to select only a few of the most used program functions for greater clarity)
• Quick selection of mix switches (selected automatically by flipping the switch) and their on/off position
• Ability to assign voice notifications to individual switch positions
• Ability to assign an image to each model (displayed on home page and model selection page)
• Servo monitor and servo tester
• Two timers (stopwatch or timer)
• Model operating time
• Transmitter operating time
• Throttle control position signaling when switched on
• Adjustable display backlight
• Calibration of cross controllers
• Warning signaling – sound and vibration
• Range control
• 2- or 3-receiver operation mode settings including two-/three-receiver operation with automatic backup when using R7208SB or R7308SB receivers

• 13 wing types
• 3 types of tail surfaces
• 2 types of vertical tail surfaces (winglets)
• Adjusting the flaps
• Differentiation of aileron deflections
• Aileron-flaps mix
• Aileron-brake flap mix
• Aileron-rudder mix
• Mix aerodynamic brake-elevator
• Rudder-aileron mix
• Mix camber (curvature of the trailing edge)
• Mix elevator-camber
• Flap-elevator mix
• Kicked twist
• Butterfly tail surfaces
• Mix ailevator (elevator for 2 servos)
• Winglets
• Mix Motor (for switch control with adjustable start and stop)
• Intelligent interface for setting up the Futaba GYA553 gyro system on the transmitter display with the option of wired or wireless connection (after reading the data from the wired gyro beforehand, the number of functions is limited)
• 4 sequencers for control of retractable landing gear and similar applications with adjustable timing of movements for landing gear leg and landing gear door

• 13 wing types
• 3 types of tail surfaces
• 2 types of vertical tail surfaces (winglets)
• Adjusting the flaps
• Differentiation of aileron deflections
• Aileron-flaps mix
• Aileron-brake flap mix
• Aileron-rudder mix
• Mix aerodynamic brake-elevator
• Rudder-aileron mix
• Mix camber (curvature of the trailing edge)
• Mix elevator-camber
• Flap-elevator mix
• Butterfly mix
• Mix butterfly-elevator
• Trim mix 1 and 2
• Butterfly tail surfaces
• Mix ailevator (elevator for 2 servos)
• Winglets
• Mix Motor (for switch control with adjustable start and stop)
• Intelligent interface for setting up the Futaba GYA553 gyro system on the transmitter display with the option of wired or wireless connection (after reading the data from the wired gyro beforehand, the number of functions is limited)
• 4 sequencers for control of retractable landing gear and similar applications with adjustable timing of movements for landing gear leg and landing gear door

• 8 types of cycle board
• 9-point throttle curves
• 9-point curves of the collective
• Acceleration
• Autorotation
• Adjustment of deviations and corrections for the cyclic plate.
• Limit of deviations of cyclic control
• Correction mixes for gas
• Gyro gain control
• Mix collective-needle
• Revomix
• Governor control
• Intelligent interface for setting up the Futaba CGY755, CGY760R CGY770R gyro systems on the transmitter display with the option of wired connection (the same full range of functions as on the GPB-1) or wireless connection (after previously reading data from the gyro via cable, a limited number of functions)
• 4 sequencers for control of retractable landing gear and similar applications with adjustable timing of movements for landing gear leg and landing gear door

• Flight modes
• Adjustment of deviations
• Setting double deflections
• Freely programmable mixes
• Gyro gain control
• 4 sequencers for control of retractable landing gear and similar applications with adjustable timing of movements for landing gear leg and landing gear door

• Temperature
• Speed (with magnetic or optical sensor, with phase sensor for AC motors)
• Height/Variometer
• True airspeed
• GPS
• Voltage
• Current
• S.BUS2 servo sensor (current, temperature, lever angle)
• Flight recorder (write telemetry data to SD card)
• EM-100 OS Engine
• Kontronik controllers
• Hobbywing controllers (using the SBM-2 interface module)
• Pixhawk® control units (using the SBS-01ML interface module)
• Castle TL0
• JetCat V10
• Power Box

RC KIT INCLUDES

• Futaba T26SZ 2.4GHz transmitter
• R7208SB FASSTest/FASST receiver
• Transmitter battery 7.4 V LiPo 2000 mAh
• Transmitter strap
• USB cable
• Cable for setting up the receiver
• Operating instructions