Shopping Cart
There are no more items in your cart
KAVAN Brushless Motor PRO 4355-700
KAV30.2030
Kavan
Reciprocating electric motor with rotating casing for aircraft models: glider 3300g, trainer 3300g, acro 2800g, 3D 2200g, KV700 rpm on V, Lixx 4s power supply. Shaft 5.0mm. Alternative designation according to stator dimensions: 3530-700.
Express delivery
Large selection of carriers
Satisfaction guarantee
KAVAN PRO motors are high-performance brushless fourteen-pole electric motors with a rotating casing ("outrunner") with excellent electrical properties, sophisticated construction and top-quality manufacturing. Shafts made of hardened steel and high-quality bearings ensure a long service life, quality materials used for the manufacture of the stator and rotor also guarantee excellent performance parameters with high efficiency. They are low-speed, high-torque engines that handle large-diameter propellers and climbs without the need for a gearbox.
| Engine marking system: PRO xxYY-zzzz |
| PRO - AC motor with a rotating casing ("outrunner", "circulator") |
| xx - motor diameter in mm |
| YY - motor length in mm |
| zzzz - number of revolutions per volt (rpm per V), "KV" |
CAVAN FOR 4355-700
KAVAN PRO 4355-700 is an AC motor designed to drive models with a flight weight of up to 3300 g with power from a four- to five-cell LiPo battery. It is perfectly suited for models in which you would previously mount a 6.5-8 cc internal combustion engine.
Engine Mounting: The KAVAN PRO 4355-700 is designed for both front and rear mounting. For front mounting behind the engine face, use four M3 screws that extend 4-5mm into the engine face. The engine bulkhead should be 6mm aircraft grade plywood. The rear mounting kit (mounting cross, rear mounting propeller carrier) is supplied with the engine.
Motor kit includes: KAVAN PRO 4355-700 AC motor with cables with soldered 4mm gold-plated connectors, rear mounting kit. You can download the complete manual for the motor here: AC motors KAVAN PRO - Instruction manual
Note: Alternative designation according to the dimensions of the stator 3530-700.
| LiXX cell power supply | 4 |
| Revolutions per volt [rpm/V] | 700 |
| Max. power (180 s) [W] | 2013 |
| Internal resistance [mOhm] | 13.5 |
| Open circuit current (at 10 V) [A] | 2.45 |
| Current at max. efficiency (?>78%) [A] | 7 - 28 |
| Max. peak current (180 s) [A] | 117 |
| Diameter [mm] | 43 |
| Length [mm] | 53 |
| Total length [mm] | 75 |
| Shaft diameter [mm] | 5 |
| Weight [g] | 302 |
| Number of poles | 14 |
| Timing [°] | 20 - 25 |
| Regulator [A] | 120 - 160 |
| Glider up to weight [g] | 3300 |
| Weight trainer [g] | 3300 |
| Acrobat to weight [g] | 2800 |
| 3D to weight [g] | 2200 |
| Recommended propeller | 4S: 13x7"-14x7" |
- Počet pólů
- 14
- Doporučená vrtule
- 4S: 13x7"-14x7"
- Délka [mm]
- 53
- Hmotnost [g]
- 302
- Průměr [mm]
- 43
- Napájení LiXX článků
- 4
- Otáčky na volt [ot./min/V]
- 700
- Vnitřní odpor [mOhm]
- 13.5
- Průměr hřídele [mm]
- 5
- Časování [°]
- 20 - 25
- Regulátor [A]
- 120 - 160
- Větroň do hmotnosti [g]
- 3300
- Trenér do hmotnosti [g]
- 3300
- Akrobat do hmotnosti [g]
- 2800
- 3D do hmotnosti [g]
- 2200
- Délka celková [mm]
- 75
- Proud při max. účinnosti (?78%) [A]
- 7 - 28
- Max. špičkový proud (180 s) [A]
- 117
- Max. výkon (180 s) [W]
- 2013
- Proud naprázdno (při 10 V) [A]
- 2.45
New
8596450022683
Customers who bought this product also bought:
Programming card with LED display for KAVAN PRO and KAVAN Plus controllers (also compatible with FOXY G2 controllers).
Last items in stock
root width 8mm for M3 screw, up to 12,000 rpm
Gold G4 connectors for models with the possibility of transferring up to 80A load. Suitable for cables with a cross section of 2.5 - 4 mm2.
Precision duralumin TURBO cone for a tilting propeller with a diameter of 40 mm with a 5.0 mm collet, with 3 mm pins for propeller blades with an 8 mm thick root. Made in Czech Republic.
Tap to zoom
