Express delivery
Large selection of carriers
Satisfaction guarantee
KAVAN PRO motors are high-performance brushless fourteen-pole electric motors with a rotating casing ("outrunner") with excellent electrical properties, sophisticated construction and top-quality manufacturing. Shafts made of hardened steel and high-quality bearings ensure a long service life, quality materials used for the manufacture of the stator and rotor also guarantee excellent performance parameters with high efficiency. They are low-speed, high-torque engines that handle large-diameter propellers and climbs without the need for a gearbox.
| Engine marking system: PRO xxYY-zzzz |
| PRO - AC motor with a rotating casing ("outrunner", "circulator") |
| xx - motor diameter in mm |
| YY - motor length in mm |
| zzzz - number of revolutions per volt (rpm per V), "KV" |
COFFEE FOR 2813-1500
KAVAN PRO 2813-1500 is a miniature AC motor designed to drive small models with a flight weight of up to 300 g with power from a two-cell or three-cell LiPo battery. With its help, you can successfully "electrify" e.g. rubber bands from Guillow's or Dumas kits with a span of up to approx. 1200 mm, it is also excellent for park flyers and indoor acrobatic models.
Motor mounting: The KAVAN PRO 2813-1500 is designed for rear mounting with the propeller fixed by means of a rubber driver (O5.5 mm). When mounting, use at least two (opposite) or four M2 screws. The engine bulkhead should be 1-1.5mm aircraft grade plywood. The mounting cross is part of the engine.
The engine set includes: KAVAN PRO 2813-1500 engine with cables (without connectors), rubber driver accessories. You can download the complete manual for the motor here: AC motors KAVAN PRO - Instruction manual
Note: Alternative designation according to stator dimensions 2206-1500.
| LiXX cell power supply | 2 - 3 |
| Revolutions per volt [rpm/V] | 1500 |
| Max. power (180 s) [W] | 170 |
| Internal resistance [mOhm] | 96.5 |
| Open circuit current (at 10 V) [mA] | 700 |
| Max. peak current (180 s) [A] | 15 |
| Diameter [mm] | 28 |
| Length [mm] | 13.3 |
| Total length [mm] | 19.3 |
| Shaft diameter [mm] | 4 |
| Weight [g] | 27.6 |
| Number of poles | 14 |
| Timing [°] | 20 - 25 |
| Regulator [A] | 15 - 20 |
| Glider up to weight [g] | 300 |
| Weight trainer [g] | 280 |
| Acrobat to weight [g] | 250 |
| 3D to weight [g] | 200 |
| Recommended propeller | 2S: 9x5"-10x6" |
| 3S: 8x4" | |
