Traxxas TRX-4 Chevrolet K5 Blazer 1979 1:10 RTR orange
TRA82276-4-ORNG
TRAXXAS
Expedition RC model of the TRX-4 Chevrolet K5 Blazer 1979 with excellent off-road capabilities and newly detailed clipless body with a classic look from the 70s-80s. Proven TRX-4 chassis, remote-controlled 2-speed transmission, differential locks and po
The package contains a fully assembled RC model Chevrolet K5 Blazer 1979 with installed components: XL5 HV DC controller, Titan 550 21T 14V DC motor, 2075X high-torque MG servo, 3x 2065 servos, TQi 5-channel TSM receiver, telemetry. TQi 4-channel BlueTooth Ready transmitter. Accessories: tool kit (1.5, 2.0, 2.5 mm Allen key, cross wrench). Instructions CZ, manual EN, DE, FR, SP.
Characteristics
Expedition RC model of the TRX-4 Chevrolet K5 Blazer 1979 with excellent off-road capabilities and newly detailed clipless body with a classic 70-80s look. Proven TRX-4 chassis, remote-controlled 2-speed transmission, differential locks and portal axles.
Traxxas has prepared for you a fully assembled RC model of a car on the TRX-4 chassis, very realistically crafted according to the original from 1979. The model stands out not only with great equipment, but also with perfect and faithfully crafted body details in the style of the 70s. A clip-free body system is used for quick and easy battery replacement. The body simply snaps into the wheel arches.
The Chevrolet Blazer was introduced by General Motors in 1969. Its shorter wheelbase and excellent off-road capabilities made it the clear leader among 4x4 off-roaders. Today, the 1979 Chevrolet K5 Blazer, on which the RC model is based, is a collector's item.
The TRX-4 chassis features state-of-the-art technology with portal axles, remote-controlled differential locks and a remote-controlled two-speed transmission. You can switch between different driving modes and there is also a cruise control function. The model can be further equip with a functional winch, multi-function lighting and a wide range of other accessory parts (sold separately) . It is the top quality, wide range of tuning parts and the possibility of gradual improvement that makes the TRX-4 the best expedition model in the world.
New chassis
The new, modified TRX-4 chassis is built from two steel profiles, which ensure sufficient rigidity of the chassis. Thanks to the proven placement of the engine in the front, sufficient load on the front wheels is ensured. The battery is located in the chassis axis, so the model is precisely balanced and does not tilt while driving. The fenders are directly on the chassis and at the same time the body is snapped into them using beaks.
Portal axles
The TRX-4 chassis uses portal axles with an axle gearbox. The axle gearbox increases ground clearance, reduces stress on the differentials, transmission, and driveshafts, and further reduces torsional force.
The front wheels can be turned 45° to each side, and the steering is provided by a Traxxas servo with metal gears. Thanks to the new chassis, the model has achieved an excellent approach angle of 63°.
Two-speed gearbox
The model is equipped with a two-speed gearbox. Gear changes are controlled by a red rocker switch on the transmitter. This solution makes the TRX-4 chassis a very versatile model that can drive slowly or quickly - as you need.
Lockable differentials
The differential locks are independently controlled by 2 servos. The power from the servos is transmitted via Bowden cables to the differentials. The locks are controlled by a three-position switch on the transmitter and provide the following combinations:
Both differentials are open
Only the front differential is locked
Both differentials are locked
GTS oil shock absorbers
Four oil-filled GTS shock absorbers provide smooth damping and perfect driving characteristics. The aluminum shock absorber bodies are equipped with a nut for adjusting the spring preload. Special X-rings ensure maximum tightness of the shock absorber around the piston rod.
Licensed bikes
The 1.9" TRX-4 Canyon Trail wheels are newly chromed and complete the overall look of the model, along with chrome bumpers and differential covers.
Stapleless bodywork
The beautifully crafted bodywork features lots of great details, such as chrome side moldings, mirrors, wipers and a front grille. The new bodywork attachment system using hooks in the wheel arches ensures quick and easy battery replacement and the bodywork's appearance is not disturbed by clips. To remove the bodywork, simply press the hook and pull the bodywork upwards. Installing the bodywork is even easier, just place it on the chassis.
Power steering
The model is controlled by a Traxxas 2075X high-torque digital servo, with a torque of 9 kg.cm. The servo is equipped with two ball bearings on a milled shaft and metal gears for maximum durability. Waterproof* construction.
Transmission and differential servos
The model is equipped with a total of three waterproof* 2065 micro servos with a torque of 2.5 kg.cm. Two servos independently control the front and rear differential locks. The third servo then provides shifting for the two-speed gearbox.
Titan 21T engine
The model is powered by a Titan 21T 550 DC motor. The motor provides smooth operation even from low speeds. For better cooling, the motor has an integrated fan blowing air to the rotor.
DC regulator
The heart of the Traxxas model is the XL-5 HV DC electronic controller. The controller is designed to be powered by a 2-cell or 3-cell LiPo battery. The model can also be powered by 6-7-cell NiMH batteries. Easy selection of driving modes and other settings using the EZ-SET button. Controller status indication by LED diode. LVD protection against underdischarge of the LiPo battery. Thermal protection. Water-resistant* construction.
The Traxxas XL-5 HV controller supports 5 driving modes:
Sport : Forward, brake and reverse
Race : Forward and brake. Reverse is not available.
Training : Forward limited to 50% power, brake 100% and reverse limited to 50%. This mode is suitable for children
Trail : Forward, brake, reverse. Controls near neutral are very smooth
Crawl : Drive forward, brake in neutral, and straight into reverse.
Traxxas TQi Four-Channel RC Kit with Bluetooth
The four-channel transmitter, in addition to precise and reliable control, is also equipped with a slot for placing a Bluetooth module (sold separately). The Bluetooth module will allow you to connect the RC model with the clear graphical Traxxas Link application, which you can install on your Smartphone for free.
The Traxxas Link app for Apple devices is available for free on the AppStore , and the app for Google Android devices is available for free on GooglePlay .
The Traxxas Link App is a powerful app that gives you complete control over the operation and tuning of your Traxxas RC model with stunning visualization and absolute precision of settings. Traxxas Link can display telemetry data that the model provides in real time, such as speed, rpm, temperature, battery voltage and tilt of the model. You can share the settings of your RC models, you can create any number of profiles for a specific track or user, such as children. All in an app with brilliant graphics, which is a given from Traxxas.
Telemetry capabilities vary by model. Telemetry sensors may need to be installed to obtain telemetry data. For compatible telemetry parts with this model, see the "Accessories - Telemetry" section. More information on installing telemetry here.
Telemetry - model tilt
Using a wireless Bluetooth module (sold separately) and the Traxxas link app, you can monitor the tilt of the model on your phone. To view additional telemetry (battery voltage, RPM, temperature), telemetry sensors must be installed.
Traxxas TQi receiver
RC receiver Traxxas TQi 5-channel TSM with telemetry for Traxxas TQi transmitters. Easy to use, pairing with a button. Status indication by LED. The receiver has integrated 3-axis MEMS sensors for learning the receiver's position.
The 5-channel receiver is also equipped with two connectors for connecting RPM (speed) and V/T (voltage/temperature) telemetry sensors.
Furthermore, a telemetry expansion module can be connected to the 4-pin connector, into which you can connect up to 6 additional sensors, including a very accurate GPS speed sensor.
Features of the Traxxas TRX-4 Chevrolet RC car model
The model is fully assembled and ready to drive.
Licensed clipless bodywork based on the 1979 model
TRX-4 chassis with metal profiles
Remotely controlled differential locks
Remote-controlled two-speed transmission
Portal axles with gearbox
Powerful Traxxas Titan 21T DC motor
Traxxas XL-5 HV DC electronic controller with special modes
Front wheel turning 45° to both sides
Optimized geometry limiting bump-steer effect (change in wheel toe-in depending on ground clearance)
Tires for excellent grip on the surface
Long driving time - with LiPo battery 11.1 V 5000 mA up to 2 hours
*Please refer to the user manual for water resistance specifications. For tips and tricks on wet operation, please visit the blog.
We recommend buying
To operate the model, you need 4x AA batteries for the transmitter, a drive battery and a charger for the drive battery.
Recommended LiPo batteries
The model can be operated with a 2 or 3 cell LiPo battery. For normal driving, a 2 cell LiPo battery (7.4 V) is fully sufficient. For operation with a higher speed range, a 3 cell LiPo battery can be used.
For normal driving 2S LiPo battery Traxxas 7.4 V 5000 mAh
For normal driving and mechanical durability 2S LiPo battery Traxxas 7.4 V 5200 mAh Hardcase
For normal driving and maximum driving time 2S LiPo battery Traxxas 7.4 V 7600 mAh
For demanding users and high speed range 3S LiPo battery Traxxas 11.1 V 4000 mAh
Recommended NiMH batteries
NiMH batteries do not require precise handling and are therefore suitable if the RC model car is operated by children (the NiMH battery will not be destroyed by a complete discharge). However, NiMH batteries have a lower capacity and a higher weight, so the driving time will be slightly shorter.
For normal driving, NiMH battery 8.4 V 3000 mAh
For maximum driving time NiMH battery 8.4 V 5000 mAh
Recommended Traxxas chargers
Traxxas universal chargers can charge Traxxas LiPo and NiMH batteries. Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , so you can always be sure that everything is connected easily and safely. There is an integrated chip in the battery connector that the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.
Universal chargers for batteries up to 3S LiPo
Traxxas EZ-Peak 50W Single Output Charger
Traxxas EZ-Peak 2x50W charger with 2 outputs
Universal chargers for batteries up to 4S LiPo
Traxxas EZ-Peak 75W Single Output Charger
Traxxas EZ-Peak Live 100W charger with single output and Bluetooth phone connection option
Traxxas EZ-Peak Live 2x100W charger with 2 outputs and Bluetooth phone connection option
Wireless connection to your phone
By adding a Bluetooth module to the transmitter, you get the function of wirelessly connecting the RC model to the Traxxas Link application, which you can install on your phone for free. We recommend a phone holder to attach your phone to the transmitter.
The clear graphical application allows for easy model setup. The application also allows you to view the telemetry provided by the model. Telemetry options for specific models are listed in our blog Telemetry for Traxxas RC Models.
LED lighting
For a breathtaking look during evening adventures, we recommend fitting the model with original LED lighting. The lighting not only looks great, but also perfectly illuminates the road.
Constant Lighting - All LED lights of this lighting are permanently on. The set can be upgraded to Pro Scale later.
Pro Scale multi-function lighting - realistic functions like on a real car (functional brake and reversing lights, functional turn signals and hazard lights, adjustable headlight intensity). Possibility of remote control of lighting using a phone via Bluetooth module.
Both types of lighting can be supplemented with fender lighting.
Winch
The winch is an integral part of every expedition model that will pull you out of any terrain. The original Traxxas winch is precisely designed to scale for TRX models. The winch is controlled by a remote control and develops a pulling force of up to 4.5 kg. To install the winch, it is necessary to add a tuning bumper - (more in the item description).
Traxx tracks for every terrain
The new Traxxas Traxx Track Kit gives your TRX-4 a dramatic, unique look and will take you on any terrain. Easy to install, this tuning kit delivers a virtually unstoppable upgrade in power and traction.
Boat transport trailer
For stylish boat transport behind your model car, we recommend the three-axle trailer for the Traxxas Spartan/DCB M41, or the trailer for the Disruptor. For an extra dose of realism, the trailers can be further equipped with an optional lighting kit or an electric winch. More information in the trailer description.
Other accessories
Carrying bag and backpack
Carry your RC model comfortably and safely in a Traxxas sports bag or backpack. In addition to the main large pocket for the model, there are specially designed side pockets for batteries, charger, tools, etc.
Stand
The aluminum rotating stand will be the perfect addition to your service table or display shelf. The stand makes it easier to maintain the model and at the same time prevents deformation (sag) of the tires during long-term parking.
Work mat
Work mat 91x51cm, for RC model servicing and other model work. Prevents damage to the workbench, resistant to chemicals. Practical compartments for organizing parts and tools.
Screw and bearing sets
Exclusive complete sets of screws and bearings are available for the model. You can use the sets when servicing the model and as a tuning for driving in wet conditions we recommend installing a stainless steel set. A complete overview of sets for Traxxas models can be found in the blog.
Screw set (blackened)
Screw set (stainless steel)
Bearing set (standard)
Bearing set (stainless steel)
Recommended tuning servos, required when using optional accessories (increasing model weight)
The TRX-4 model, as one of the most user-modified models, often gains 1-2 kg in weight due to accessories. When increasing the weight of the model, it is necessary to use a stronger servo. In newly sold TRX models, the controller already has a powerful switched-mode BEC power supply and it is not necessary to use an external BEC power supply for stronger tuning servos with current consumption up to 5 A (short-term).
Recommended tuning servos:
Traxxas servo 2270 16.9 kg.cm MG waterproof
Traxxas servo 2250 24 kg.cm MG waterproof
Traxxas servo 2255 29 kg.cm BL MG waterproof, with brushless motor
Traxxas servo 2280 50 kg.cm BL MG waterproof, with brushless motor
Accessories for normal operation
For normal operation of your Traxxas RC car, you need screw glue, quality tire glue, silicone shock absorber oil and a set of screwdrivers. We recommend an affordable car tool set from our range.
Screw glue is applied to the thread or head of the screw, which fixes it and prevents the vibrations caused by driving from loosening the screw connection. Screw glue has a special composition that allows the screw connection to be easily loosened with an appropriate torque without damaging the screw head. Never use ordinary superglue, a screw glued in this way may be impossible to loosen at all!
Tire glue is used to glue tires to the rim of the wheel. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not glued around the entire circumference, it may burst. Tire glue has a special composition that is able to glue materials such as rubber or nylon and at the same time the glue is flexible after hardening. Never use ordinary superglue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!
Sometimes it is necessary to add silicone oil to the model's shock absorbers. During normal operation, only slight silicone oil leaks occur along the shock absorber piston rods. If the surface of the shock absorber piston rods or the condition of the seals is in poor condition, the oil leak can be large. So-called repair kits are available for these cases. The tuning parts offer includes piston rods with an extremely hard TiN (titanium nitride) coating for all shock absorbers. Piston rods with a TiN coating can be easily recognized by their golden-green color.
Alkaline battery LR6 AA is designed for devices with low current consumption, shelf life up to 7 years, leakage protection, working temperature -20 ° C to +60 ° C.
Licensed body Killerbody Toyota Land Cruiser 70 for expedition RC car models 1:10 (wheelbase 313 mm, width 197 mm - Axial SCX10, Vaterra Ascender, etc.). It is made of ABS material, very child
Robitronic bag for expedition cars has dimensions of 29 cm x 47 cm x 14 cm, at the end of the hem is a drawstring. The length of the ear is about 30 cm. Sturdy stitched fabric with firm handles. Save
Special instant glue Robitronic Tire Glue designed for gluing tires to RC car discs. The adhesive is flexible after solidification, thus minimizing the risk of the tire tearing at the joint. O
The Traxxas 13-bit screwdriver (Master set) contains a Premium handle with interchangeable Allen bits 1.5, 2.0, 2.5, 3.0 mm, ball bits 2.0, 2.5, 3.0 mm and socket bits 4.0, 4.5, 5.0, 5.5, 7.0, 8.0 mm.
Replacement Stems for Traxxas Premium Screwdriver or Cordless Screwdrivers, with 2.0mm and 2.5mm Allen End Caps. The stems are made of high quality HSS steel.
Replacement shafts for Traxxas Premium Hand Screwdriver or Cordless Screwdrivers, with 1.5mm Allen, 2.0mm and 2.5mm. The stems are made of high quality HSS steel.
The Traxxas circular saw is used to precisely circle holes in car bodies up to a diameter of 15 mm. A practical aid for modelers, the cutting part with 2 knives is made of high-quality steel, the handle is made of aluminum.
The Traxxas reamer is used to precise holes in car bodies up to 15 mm in diameter. Practical tool for modellers, cutting part with 2 knives is made of quality steel, handle is plastic.
Dual charger Traxxas EZ-Peak Plus for NiMH and LiPo batteries. Thanks to today's very common RFID technology, the charger itself identifies the connected types of batteries and sets the charging param
A revolutionary way to charge batteries! Just connect a NiMH or LiPol battery with an ID connector and press the Start button. The charger detects the type and number of batteries and starts charging.
A revolutionary way to charge batteries thanks to EZ-Peak Live Dual 2x100W! Just connect a NiMH or LiPol battery with an ID connector and press the Start button. The charger detects the battery parame
Traxxas charger EZ-Peak Plus 75W, for extremely simple and safe charging of Traxxas batteries. Automatic recognition of Traxxas iD batteries. High performance - charging current up to 8A. Charging
The Traxxas USB-C charger with a maximum power of 40W is intended for charging Traxxas batteries 2-3S LiPo or NiMH (7.2-8.4 V) with an iD connector. The charger automatically recognizes the Traxxas iD battery type and automatically sets the optimal...
With these color plugs, you can easily distinguish which battery is charged, discharged or ready for long-term storage. The blanking plugs are compatible with both old and new types of Traxxas connect
With regard to the new 4-cell LiPo batteries for the Traxxas X-Maxx 8S models, there is a new adapter for two to four-cell LiPo batteries Traxxas with iD connector. Part of the adapter output is a con
The new Traxxas iD system is the easiest way to charge your batteries! Thanks to today's completely common RFID technology, the charger itself identifies the connected battery type and sets the charging parameters by itself. Just plug in the battery...
Traxxas LiPo battery tester with integrated balancer. Accurate and immediate measurement of individual cells always at hand. Possibility of connecting a 1 to 6 cell battery via the included adapter. I
Traxxas precision modeling knife with 5 blades. Aluminum handle with non-slip surface and engraved Traxxas logo. Attaching the blades with collets. High quality carbon steel blades.
The Traxxas rubberized screwdriver handle is equipped with a comfortable practical rubber ergonomic handle, which guarantees a pleasant grip and a long service life. Traxxas exchangeable bits can be inserted into it as well as other standard bits.
The Traxxas screwdriver handle large is equipped with a comfortable practical rubber ergonomic handle that guarantees a comfortable grip and a long service life. Traxxas exchangeable bits can be inserted into it as well as other standard bits.
The Traxxas screwdriver with interchangeable bits (Master set) contains a Premium handle with interchangeable Allen keys 1.5, 2.0, 2.5, 3.0 mm and ball bits 2.0, 2.5, 3.0 mm. Tool case with embroidere
The Traxxas screwdriver with interchangeable bits (Essential set) contains a Premium handle with interchangeable hex bits of 1.5, 2.0, 2.5 mm and plug-in bits 5.0, 5.5, 7.0, 8.0 mm. Tool case with emb
Traxxas set of silicone oils (7x 60ml) with swivel stand. Silicone oil bottles with viscosities - 200cSt, 350cSt, 500cSt, 600cSt, 700cSt, 900cSt, 1000cSt, with cap and nozzle for fast as
Traxxas silicone grease is suitable for parts that may be in direct contact with water, such as universal joints, half-axles, open parts of gearboxes, etc. Silicone grease is highly water-repellent.
Traxxas silicone grease to differential 20,000,000 cSt. Traxxas silicone grease is suitable for lubrication of differentials or parts that may be in direct contact with water, eg crosses
Traxxas silicone grease is suitable for lubricating differentials or parts that may be in direct contact with water, eg cross joints, half axles, open gearboxes, and so on. Silicone va
Lithium grease is used to lubricate bearings or servo gears . It is water and moisture-free, does not corrode, has excellent antioxidant effects, wide range of operating temperatures, very good
Traxxas ball bearing with an inner diameter of 10 mm, an outer diameter of 15 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 15 mm, an outer diameter of 21 mm and a width of 4 mm with a double-sided rubber seal of black. There are 2 pieces of bearings in the package.
Traxxas ball bearing with an inner diameter of 4 mm, an outer diameter of 10 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 10 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 11 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 8 mm and a width of 2.5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 6 mm, an outer diameter of 13 mm and a width of 5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 7 mm, an outer diameter of 14 mm and a width of 5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Complete universal wheels. Chrome wheels with Canyon Trail tires for TRX-4 Chevrolet blazer (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118x48 mm. The carrier is a 12 mm hexagon s
Traxxas bolt kit for TRX-4 RC car models. Restore the screws on your model to like new with this replacement set of blackened hex screws. The set of screws is packed in a practical box with compartments and a label for easy identification.
Traxxas 3975 550 Series DC Motor with 21 turns with reverse rotation. The motor is intended for DC versions of the E-Maxx, E-Revo, or TRX models. For better cooling, a propeller is integrated in the motor, blowing air to the rotor.
Traxxas long ball joint ends. Designed for rods with M3 threads, hole for ball pin with a diameter of 5.5 mm. The set also includes ball pins with a 3 mm hole.
Traxxas 5 Channel Traxxas Receiver for Traxxas TQi with Integrated Telemetry and Traxxas Stability Management (TSM). The receiver is compatible with the older version of the TQi transmitters (p
Traxxas 2065A micro servo. New more durable plastic gears. Moment 2.5 kg.cm, speed 0.20 s/60° at 6.0 V. Dimensions 12.8 x 22.8 x 23.0 mm. Weight 11 g. Increased water resistance.
Standard size digital servo for 1:10 RC car models, Traxxas 2075X, plastic body, waterproof*, has a torque of 9 kg.cm @ 6V and a speed of 0.17 s/60° @ 6V. Metal gears, pair of bearings, dimensions: 20x41x36mm, weight 57g. Thousand square 25T
Traxxas silicone grease is suitable for lubricating differentials or parts that may be in direct contact with water, eg cross joints, half axles, open gearboxes, and so on. Silicone va
XL-5 HV DC controller for Traxxas 1:10 scale DC motor driven cars. Powered by up to 3S LiPol batteries. 5 driving modes, including Crawler and Trail mode.
Spare part for RC car models Traxxas 1:10 4-Tec 2.0, drift Ford, Ford Mustang: battery holder aluminum blue. Suitable for 4-Tec® 2.0 RC cars with a wheelbase of 256 mm.
Spare part for RC car models Traxxas 1:10 4-Tec 2.0, drift Ford, Ford Mustang: battery holder aluminum gray. Suitable for RC cars 4-Tec® 2.0 with a wheelbase of 256 mm.
Spare part for RC car models Traxxas 1:10 4-Tec 2.0, drift Ford, Ford Mustang: battery holder aluminum red. Suitable for 4-Tec® 2.0 RC cars with a wheelbase of 256 mm.
Traxxas Body Chevrolet Blazer 1972 Clear. Requires painting, including grille, mirrors, door handles, wipers and clipless mounting system. Designed to mount on #8072X.
Traxxas Body Chevrolet Blazer 1972 Red. Complete painted bodywork, including radiator grille, mirrors, door handles, wipers and clipless mounting system. Designed to mount on #8072X.
Traxxas LED lighting Pro Scale, for Traxxas TRX-4 and TRX-6 models. Functional brake and reverse lights, functional turn signals, functional warning lights, taillights, adjustable intensity of front headlights. Possibility of additional lighting....
Conversion kit for the Traxxas TRX-4 chassis allowing the wheelbase to be increased from 312mm to 324mm. Includes rear upper and lower suspension rods, front and rear shock towers and axle drive output shaft.
Conversion kit for the Traxxas TRX-4 chassis allowing the wheelbase to be reduced from 324mm to 312mm. Includes rear upper and lower suspension rods, mudguards, outer drive shaft, modified battery holder and fasteners.
Remote controlled winch for all RC models of the Traxxas TRX-4 and TRX-6. Realistic processing. Tah 4.5 kg. 120 cm long tow rope. Quick manual unwinding function 2 channel control for steering on
Tuning conversion set in red for the Traxxas TRX-4 chassis enabling higher wheel lift. The set contains all the necessary parts needed for the conversion.
Traxxas LED lighting complete set - for TRX-4 Chevrolet model 1979. Original tuning set with complete LED lighting, power module, and mounting accessories. Complete LED lighting will make your model a real gem and you can enjoy the extraordinary
Traxxas Complete Pro Scale LED Lighting Kit for 1979 Chevrolet TRX-4 RC Model Cars. Functional brake and reverse lights, functional turn signals, functional hazard lights, tail lights, adjustable headlight intensity. The possibility of additional lighting
Traxxas set of stainless steel ball bearings for TRX-4 RC car models. Upgrade the bearings on your model to stainless steel for long-lasting performance in wet conditions. The bearing set is packed in a box with compartments and a label for...
Traxxas 3.17 mm (1/8 ") shaft pinion with 10 teeth and 32DP (0.8 mm) gear module for RC car models. Made of sintered steel. The package includes a worm.
Traxxas 3.17 mm (1/8 ") shaft pinion with 12 teeth and 32DP (0.8 mm) gear module for RC car models. Made of hardened tool steel. The package includes a worm.
Traxxas 3.17 mm (1/8 ") shaft pinion with 20 teeth and 32DP (0.8 mm) gear module for RC car models. Made of hardened tool steel. The package includes a worm.
Traxxas servo 2065R with metal gears. Moment 2.5kg.cm, speed 0.20s/60° at 6.0 V power supply. Dimensions 12.8 x 22.8 x 23.0 mm. Weight 15 g. Increased water resistance.
Standard size digital servo for 1:10 RC car models, Traxxas 2250, waterproof, aluminum body, has a torque of 24 kg.cm @ 6V and a speed of 0.19 s/60° @ 6V. Metal gears, dimensions: 41x20x43mm, weight 68g. Thousand edge 25T
Standard size digital servo for 1:10 RC car models, Traxxas 2255, waterproof*, aluminum body, has a torque of 29 kg.cm @ 6V and a speed of 0.15 s/60° @ 6V. Metal gears, dimensions: 41x20x43mm, weight 68g. Thousand square 25T
GTS tuning aluminum shock absorbers with Teflon (PTFE) insert and rods with titanium nitride (TiN) coating designed for RC chassis of Traxxas TRX-4 car models.
Traxxas BEC source for receiver and servos. The source is necessary where a higher consumption of servos is expected. The kit includes accessories for mounting on the chassis. The power supply must be
Great and also functional model accessory for RC models of Traxxas TRX-4 cars. Traction boards are placed under the wheels, for example in sandy terrain.
Transport your Traxxas Disruptor boat to the water in style with the detailed dual-axle trailer. The trailer includes an aluminum frame, folding front stand, body supports, rubber tires and elastic mounts. Trailer can be towed behind TRX-4/TRX-6 and...
Transport your Traxxas Spartan/DCB M41 boat to the water in style with the detailed 3-axle trailer. The trailer includes an aluminum frame, a collapsible front stand, height-adjustable bed supports, rubber tires and elastic mounts. The trailer can be...
Experience an extraordinary and totally new driving experience with the Traxxas Traxx tracked chassis! Also go through the most difficult terrain with this tuning set for all Traxxas TRX-4 models. Dra
Silicone inserts 1.9" provide excellent flexibility for better tire grip and traction. The inserts are water resistant. Suitable for 1:10 scale RC car models of Crawler / Expedition type (TRX-4, SCX10). Dimensions o108x48 mm, weight 80 g (4pcs - 320 g).
Silicone inserts 1.9" provide excellent flexibility for better tire grip and traction. The inserts are water resistant. Suitable for 1:10 scale RC car models of Crawler / Expedition type (TRX-4, SCX10). Dimensions o108x48 mm, weight 80 g (4pcs - 320 g).
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Black anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Gray anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Red anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum bead lock collar ring Method 105 2.2 ". Black anodised surface. The package contains a total of 4 rings with a set of countersunk M2x10 mm screws.
Traxxas aluminum reinforcement bead lock ring discs Method 105 2.2 ". Blue anodized surface. The package contains a total of 4 pieces of ring with a set of M2x10 mm countersunk screws.
Traxxas aluminum bead lock wheel ring Method 105 2.2 ". Gray anodised surface. The package contains a total of 4 rings with a set of M2x10 mm countersunk head screws.
Traxxas aluminum bead lock collar ring Method 105 2.2 ". Green anodised surface. The package contains a total of 4 rings with a set of countersunk M2x10 mm screws.
Traxxas aluminum reinforcing bead lock ring discs Method 105 2.2 ". Red anodized surface. The package contains a total of 4 pieces of ring with a set of M2x10 mm countersunk screws.
Complete universal wheels for RC car models TRX-4. Method 105 discs in chrome-black, blue beadlock, with Canyon Trail tires (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118
Complete universal wheels for RC car models TRX-4 with beadlock rings . Method 105 discs in chrome-black with Canyon Trail tires (2 pcs in a package). Disk size o53x26mm mm. Total year
Complete universal wheels for RC car models TRX-4. Black TRX-4 Sport discs with silver rims and Canyon Trail tires (2 pcs in a package). Disk size 53x26 mm mm. Overall size 118x48 mm. Carrier
Complete universal wheels for RC car models TRX-4. Black Discs TRX-4 Sport with Canyon Trail tires (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118x48 mm. The carrier is a 12 mm hex
Complete universal wheels for RC car models TRX-4. Black Discs TRX-4 Sport with Canyon Trail tires (2 pcs in a package). Disk size 53x26 mm mm. Overall size 118x48 mm. The carrier is a 12 mm hexagon
Complete universal wheels for RC car models TRX-4 with Beadlock rings . Method 105 discs in chrome-black with Canyon Trail tires (2 pcs in a package). Disk size o48x35mm mm. Total year
Complete universal wheels for RC car models TRX-4. Black Discs TRX-4 Sport with Canyon Trail tires (2 pcs in a package). Disk size 48x35 mm mm. Overall size 137x52 mm. The carrier is a 12 mm hexagon
Wheel disc 2.2 "Method 105 gray chrome-plated with the possibility of installing bead lock rings. The package contains 2 pieces of discs. The discs are suitable for the Traxxas TRX-4 chassis.
Wheel disk 2.2" Method 105 black chrome with the possibility of installing bead lock rings. The package contains 2 pieces. The disks are suitable for the Traxxas TRX-4 chassis.
The Traxxas Canyon Trail 2.2" tire with liner is designed for Method 105 2.2" wheels. The package contains 2 pieces of tires. Diameter approx. 125mm, width 56mm. Fits Traxxas TRX-4 chassis.
Traxxas wheel 1.9 ", chrome-plated disc, Canyon Trail (4) tires - complete, with glued tires, including hub caps. Soft compound S1. Designed for mounting on part TRA8255.
Complete universal wheels. Chrome wheels with Canyon Trail tires for TRX-4 Ford Bronco (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118x48 mm. The carrier is a 12 mm hexagon with of
Traxxas wheel 1.9 ", classic chrome disc, Canyon Trail (4) tires - complete, with glued tires, including hub caps. Soft compound S1. Designed for mounting on part TRA8255.
Complete wheels. Black discs with Canyon Trail tires for RC models of TRX cars in 1:10 scale (2 pcs in a package). Wheel size o53x27mm mm, tire size o120x46 mm. The carrier is a 12 mm hexagon with off
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation blue Beadlock ring, Canyon Trail tire (2 pcs in a package). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation green Beadlock ring, Canyon Trail tire (2 pcs in a pack). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation red Beadlock ring, Canyon Trail tire (2 pcs in a package). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
The BlueTooth module is used for wireless connection with the Traxxas TQi BlueTooth Ready transmitter and the Traxxas Link application, which is intended for mobile de
Traxxas combined power adapter for ID connector - allows easy powering of other components from the battery. It contains a connector for connecting a voltage sensor. Mounting without soldering.
The temperature sensor holder for all Traxxas electric cars allows easy mounting of the thermocouple on the engine casing or its radiator. Easy and fast mounting.
The expansion telemetry module 2.0 connects to the 4-pin connector on the 6533 receiver. Thanks to the expansion module, you can use a new GPS sensor with support for GPS and GLONASS satellites for ma
They extend the telemetry 2.0 module with the GPS 2.0 module already installed. Thanks to this system, you can monitor the very accurate speed of the model in the Traxxas Link application. In a
The GPS sensor connects to the TRA6550X expansion telemetry module. Thanks to the GPS sensor, you can, thanks to the support of GPS and GLONASS satellites, measure the speed relative to the earth's su
Temperature sensor for expansion telemetry module. The sensor consists of a thermocouple, the sensor can be used to measure the temperature of the electric motor, internal combustion engines, regulato
