QuicRun WP 1080 G2
HW30120202
HOBBYWING car
QuicRun Series 80A Bidirectional Electronic Controller for 540/550 Series DC Motors, Waterproof, Dustproof, Built-in BEC, Suitable for 1/10 RC Cars and Especially Rock Crawlers. Power supply 2-3S LiPo/5-9 ch. NiMH, switched BEC 6-7.4-8.4 V/4A, dimensions 37.2x
Express delivery
Large selection of carriers
Satisfaction guarantee
The EZRUN MAX10 G2 80A controller offers everything you need to fully utilize the potential of your 1:10 DC motor RC car - especially for RC crawlers and expedition cars, it offers a number of extraordinary functions. It allows the use of a 540 or 550 series DC motor and offers a wide range of 15 programmable parameters to perfectly match the motor, chassis and track. So, if you're serious about riding your bloated "tenth" with a DC motor, Hobbywing's QUICRUN WP1080 G2 controller is for you!
Function
- Specially developed for 1:10 RC cars with special features for rock crawlers and expedition cars
- For DC motors size 540-550
- Compact dimensions, low weight
- Waterproof and dustproof construction, waterproof electronic switch
- Ideal in combination with Hobbywing QUICRUN 540 and 555 Brushed engines
- 15 programmable parameters
- Possibility of remote adjustment of the braking effect on the transmitter while driving
- Special "real car" driving mode with manual reverse gear (When this mode is selected, pressing the throttle always means braking; the purpose is to simulate a real car and smoothly go down the hill by controlling the brake. Switching the direction of rotation of the engine will be done using the switch assigned to the auxiliary (AUX) channel on the transmitter. Thanks to this, when you press the throttle, the car will go forward or backward depending on the position of the auxiliary channel switch. For example, if the maximum braking effect is not enough to stop the car on a slope, you can also try to switch the direction of rotation of the engine and off the slope drive smoothly with the engine in reverse.)
- Powerful switching BEC stabilizer up to 4 A with selectable voltage of 6.0 V, 7.4 V or 8.4 V
- Advanced protection functions (voltage protection, thermal protection, fail-safe, etc.)
- Possibility of programming with the help of a transmitter or LED programming box, special programming socket
Programmable parameters
- General: Driving Mode (Forward/Reverse, Forward/Brake/Reverse, Forward/Reverse, Real Car), Max. reverse power, Battery type (LiPo/NiMH), Voltage protection, BEC voltage, Switching frequency, Freewheel
- Throttle Control: Initial Throttle Value, Start, Max. forward power, Max. power reverse, Throttle neutral range
- Brake control: Max. braking effect, Initial braking effect, Resistive brake, Progressiveness of resistive brake
The controller set includes: QUICRUN WP1080 G2 controller with cables, user manual.
Use | Car |
Type | Direct current |
Continuous current [A] | 80 |
Max. peak current [A] | 400 |
Li-Po [Art.] | 2 - 3 |
BEC voltage [V] | 6 - 8.4 |
BEC current [A] | 4 - 6 |
Length [mm] | 37.2 |
Width [mm] | 31.9 |
Height [mm] | 18.4 |
Weight [g] | 70.2 |
Regulation | Two-way |
Brake | Yes |
Programmable | Yes |
LED programming box for Platinum V1 / V2 series flight controllers, Flyfun V5, for a large number of XeRun, EzRun and QuicRun series car controllers (alternating ESC). And also for Seaking ship regulators. Specific supported versions in the description.
The KIT model CRX2.1 is supplied without bodywork, wheels and electronic components.
KIT model CRX2.1 with a Peugeot 504 body with a wheelbase of 313 mm. Supplied without wheels and electronic components.
KIT kit of the CRX2.1 model with a Survival body with a wheelbase of 313 mm. Supplied without wheels and electronic components.