AT10II transmitter with R12DS receiver + phone. module

AT10II is a twelve-channel computer transmitter for advanced recreational and sports modellers, enabling comfortable control of all currently common types of models - motor acrobatic models, gliders, helicopters, multicopters, cars and other ground equipment and ships. It features a practical cabinet that fits perfectly into your hand with the classic, ergonomic layout of the controls over the years.

Controls: To control the main functions, use the precise cross controls with adjustable neutralizing spring force and the possibility to move the locked gas axis to the left or right. This allows you to freely select the operating modes of the cross controls 1-4. Control levers are adjustable in length, you can also buy long aluminum heads (with M3 thread). Digital trimmers have a step-by-step sound indication and a graphical display of the display positions. They are located slightly eccentrically and are easy to reach. Additional proportional functions can control two rotary knobs on the transmitter sides with a mechanically locked center position and three knobs located in the center above the main switch. 8 switches (of which three three-position and one torque two-position) can be used as channel switches, for switching flight modes or switching mixers on / off. The controls are freely assignable.

Transmitter Power: The AT10II allows a wide range of power sources to be used: 8 alkaline batteries inserted in the transmitter holder, 8 cell NiMH battery packs (AA size, pencil type), or two to four LiPo, LiFe, Li-ion kits. The battery voltage is displayed on the display in both numerical and graphical form, the low voltage threshold is adjustable. We recommend our 9.6 V NIMH low self-discharge cell kit (Eneloop, RayLong) made to measure by the transmitter and equipped with a tap for charging. / p>

Transmission System: The AT10II uses a unique Radiolink technology using simultaneous DSSS and FHSS frequency hopping to ensure long range, reliability and excellent interference immunity. The system allows the transmission of telemetry data from the receiver and their display on the transmitter display.

User Interface: The 3D programming wheel / button, two buttons and a miniature joystick cursor together with a backlit color graphic LCD display are used for programming the transmitter. The display has adjustable contrast and a choice of "color on black" or "color on white" display modes to perfectly match ambient light conditions.

Software: The software is of the classic type with pre-programmed mixes and program templates for different types of models. The AT10II has memory for 15 models.

The operation menu has three basic screens: The start screen serves to operate the transmitter in normal operation - displays the type and name of the selected model, the current flight mode, the type of receiver used, the position of the digital trim, the supply voltage of the transmitter, the timekeeping data and, when using a telemetry receiver, also the supply voltage the receiver. The telemetry screen clearly displays data from all connected telemetry sensors and modules, and the Servo Monitor screen provides a graphical representation of servo movements across all channels.

The program menu is always divided into two parts for clarity - the basic menu BASIC contains the basic system settings of the transmitter, the basic model setting (model type, assignment of drivers and switches, size and senses of deflections, subtrim trims, double deflections and exponentials, etc.). Advanced ADVANCE menu includes freely programmable mixes, special type-specific mixes (gas and team curves, butterfly mix, mixer tail mix, etc.) .

Pre-programmed model types

• Glider (1 wing + 1 flap)
• Glider (2 ailerons + 1 flap)
• Glider (2 wings + 2 flaps)
• Motorized acrobatic plane
• Helicopter
• Multikoptéra

Pre-programmed mixes and features

• Adjustment of servo deflection
• Setting the end points of deflections
• Subtrim
• Trim step size
• Double deflections
• Servo speed setting
• Exponential course of deflections
• Switching off the engine
• Safe Idling
• Failsafe emergency deflections
• Remote gyra gain control for helicopters and airplanes
• Three timekeepers
• Teacher-pupil
• Servo monitor
• Flaperony
• Elevony
• Butterfly tail
• 8 freely programmable mixers (4 linear, 4 with 5-point curve)
• Aerodynamic brakes
• Control of the trailing edge curvature for gliders
• Aileron-rudder mix
• Mixer elevator-flaps
• Mix flaps-wings
• Ailevator - elevator for 2 servos
• Trim flaps
• Butterfly mix
• Dredged roll
• Gas Curve (for Aircraft)
• Gas Delay
• Gas Curve (7-point for helicopters)
• Collective Curve (7-point for helicopters)
• Revomix
• Swashplate Mixing (8 types)
• Gas Mixing (for Helicopters)
• Cyclic deflection limit
• Trim collective and gas when hanging
• Trimming high and low teams
• Autorotation
• Governor Control
• Flight modes (up to 5 modes for gliders and helicopters)
• Flight control modes of flight control unit for multicopters and drones

The Micro USB socket is used to update the firmware using a PC.

The teacher-pupil socket is used to control the models with the dual-control system by two Radiolink transmitters connected by a teacher-pupil cable; The AT10II can serve as a teacher and pupil transmitter. As a teaching transmitter, it allows a pupil to pass all or only selected channels; the pupil can also be given partial control. In addition to the classic cable (1RL0058), it is also possible to use a wireless connection using a receiver with PPM output connected via a special adapter (1RL0056) to the teacher-pupil socket of the teaching transmitter; the receiver is paired with the pupil transmitter.

Strap: You can hang the AT10II around the neck with a strap using a strap (sold separately).

Telemetry: When using a telemetry receiver (R12DS, R9DS), the transmitter display shows the receiver's supply voltage and signal strength (with an adjustable alarm threshold). When the PRM-01 telemetry module is connected, the voltage of the battery (1-6S LiPo) is also measured and displayed.

Compatible Receivers

• Telemetry, Full Range: R9DS, R12DS
• Neteletric, full range: R12DSM Mini
• Neteletric, limited range: R6DS, R6DSM Mini

Kit includes:

• Transmitter AT10II
• 12-channel telemetry receiver R12DS
• Telemetric module for voltage measurement PRM-01 with cable
• Operating Instructions