R12DS receiver

The R12DS 2.4GHz Radiolink is a 12-channel DSSS and FHSS frequency hopping telemetry receiver compatible with Radiolink AT9, AT 9S, AT10 and AT10II transmitters (AT9, AT 9S and AT10 transmitters can be upgraded to 12 channels of their firmware updates which can be downloaded from the manufacturer's website http://radiolink.com.cn/doce/at10upgraded.html, the AT10II is 12-channel already in the basic version). The receiver is compatible with the PRM-01 and PRM-02 telemetry modules.

It offers two operating modes - with standard width modulated (PWM) signal servo outputs (11 channels) or with S-BUS serial output (12 channels).

The receiver is suitable for RC models of all kinds (manufacturer's range is 1100 m on the ground and 3000-4000 m in the air).

The use of DSSS / FHSS transmission technology delivers high interference immunity and fail-safe capability in case of power failure or strong interference.

Operating modes

• With individual PWM servo signal outputs: The red LED indicates PWM signal output, a total of 11 channels.
• With SBUS serial output: Blue / Purple LED indicates SBUS signal output, 12 channels in total. SBUS and PWM signal outputs can be used in SBUS mode simultaneously. The socket 11 is the SBUS signal, the sockets CH1 to CH10 simultaneously serve as PWM signal outputs of channels 3 to 12. How many PWM outputs you can use, depending on how many SBUS signal channels you use (eg if you use 4 S-BUS signal channels you have 8 PWM signal channels).

The pairing with the transmitter is done with the help of a pairing button on the receiver, the operating states are indicated by an LED.

The receiver is equipped with contact strips for standard UNI connectors (= JR / Graupner, Hitec, Futaba); the pins are oriented in the direction of the longitudinal axis of the receiver / p>

The receiver set includes: R12DS receiver, instructions.