Shopping Cart
There are no more items in your cart
R9DS receiver
1RL0048
Nine-channel 2.4GHz FHSS / DSSS telemetry receiver for Radiolink AT9S and AT10II transmitters. PWM operating mode: 9 units. servo channel outputs. S-BUS operating mode: S-BUS serial output + 6x PWM channels (10 channels in total). Dimensions 43x24x15mm, 10g. F
Express delivery
Large selection of carriers
Satisfaction guarantee
Radiolink R9DS 2.4GHz is a 9-channel telemetry receiver with DSSS and FHSS frequency hopping compatible with Radiolink AT9, AT 9S, AT10 and AT10II transmitters (AT10II must be switched to 10CH). The R9DS offers PWM signal output (9 channels) or S-BUS serial (10 channels). The receiver is compatible with the PRM-01 and PRM-02 telemetry modules.
It offers two operating modes - with standard width modulated (PWM) signal servo outputs (9 channels) or with S-BUS serial output (10 channels).
The receiver is suitable for RC models of all kinds (manufacturer's range is 900 m on the ground and 2000-3000 m in the air).
The use of DSSS / FHSS transmission technology delivers high interference immunity and fail-safe capability in case of power failure or strong interference.
Operating modes
- With individual PWM servo signal outputs: the red LED indicates PWM signal output, a total of 9 channels.
- With SBUS serial output: the blue / purple LED indicates the SBUS signal output, a total of 10 channels. SBUS and PWM signal outputs can be used in SBUS mode simultaneously. The socket 9 is the SBUS signal, and at the same time socket 1 is the PWM signal of channel CH3, at the sockets 2 to 6 the PWM signal is CH6 to CH10.
The pairing with the transmitter is done with the help of a pairing button on the receiver, the operating states are indicated by an LED.
The receiver is equipped with contact strips for standard UNI connectors (= JR / Graupner, Hitec, Futaba); the outlets are oriented in the direction of the longitudinal axis of the receiver.
The receiver set includes: R9DS receiver, instructions.
| Modulation / Encoding | 2.4GHz FHSS / DSSS |
| Number of Channels (PWM) - (S-BUS) | 9-10 |
| Serial output | S-BUS |
| Function | Fail-safe |
| Power supply | 4.8 V, 6V, 7.2V, 7.4V |
| Unserved [mA] | 40-180 |
| Length [mm] | 43 |
| Width [mm] | 24 |
| Height [mm] | 15 |
| Weight [g] | 14 |
Telemetry module for measuring the voltage of 1S to 6S powered lithium battery. For Radiolink R9DS and R12DS receivers. It is connected to the battery via a service connector (JST-XH).
Twelve-channel RC kit 2.4GHz FHSS / DSSS with cross controls, 8 switches, 5 turns. drivers. R12DS telemetry receiver. Memory of 15 models, mixes acro, gliders, heli, helicopters, up to 5 years. modes, freely assignable controls and switches, display...
Ten-channel RC set 2.4GHz FHSS / DSSS with cross controls, 8 switches, 4 turns. drivers. R9DS telemetry receiver. Memory of 15 models, mixes acro, gliders, heli, helicopters, up to 5 years. modes, freely assignable controls and switches, telemetry on...
Customers who bought this product also bought:
Small six-channel 2.4GHz FHSS / DSSS receiver for Radiolink AT9S and AT10II transmitters. PWM operating mode: 6 units. servo channel outputs. S-BUS operating mode: serial output S-BUS + PPM + 4 PWM channels (10 channels in total). Dimensions...
High quality 5-min two-component, high-strength epoxy adhesive for general modeling use. Package 2x50g.
LiPo battery pack KAVAN with increased load capacity 40 / 80C, charging up to 2C. Three-cell 3s1p 11.1 V 850 mAh, dimensions: 60x30x20.5mm, weight: 67g, service connector JST-XH.
Two-pin power connector with 3.5 mm gold-plated contacts with reduced transition resistance and a load capacity of max. 60 A with plastic cable covers. For cables with a cross-section of max. 3.3 mm2 (12AWG). Transition resistance 0.50 mOhm, max. 500...
Excellent medium-second adhesive, working time 7–10 s, solid joint 20–30 s. For gluing wood, metals, most plastics incl. EPP/EPO (not suitable for polystyrene foam, polyethylene and Teflon). Packaging: 20g bottle.
Fast nanoservo 4.8 g with plastic gears for small electrolets. Thrust 0.6 kg.cm, speed 0.09s / 60 ° at 4.8 V. Dimensions 20x8.6x17 mm. Only for 4.8 V supply (or 5 V from BEC).
Polyurethane adhesive for bonding EPP, expanded polystyrene and general ingestion. It foams after about 20 minutes.
Last items in stock
Practically finished model of a 1400mm wingspan school motor glider made of almost indestructible extruded polyolefin foam (EPO) with AC motor, 20A controller and 4 servos. Controlled rudder, elevator, ailerons.
Tap to zoom
