The 1979 Ford Bronco TRX-4 expedition RC model car is a 1:10 scale replica of the real car. New with a detailed clipless body with a classic look from the 70s-80s. Excellent TRX-4 chassis, remote controlled 2-speed transmission, differential locks and p
The package contains a fully assembled Ford Bronco RC model with installed components: XL5 HV DC controller, Titan 550 21T 14V DC motor, 2075X high-torque MG servo, 3x 2065 servo, TQi 5-channel receiver. TSM, telemetry. TQi transmitter 4 channels Bluetooth Ready. Accessories: tool set (hexagon 1.5, 2.0, 2.5 mm, cross key). Instructions CZ, manual EN, DE, FR, SP.
Characteristics
The 1979 Ford Bronco TRX-4 expedition RC model car is a 1:10 scale replica of the real car. New with a detailed clipless body with a classic look from the 70s-80s. Authentic chrome wheels, bumpers, side moldings, mirrors and grille all add authenticity to the Ford Bronco. Excellent TRX-4 chassis with 4x4 drive, remote controlled 2-speed transmission, differential locks and portal axles.
Traxxas has prepared for you a completely assembled RC car model on the TRX-4 chassis, very realistically processed according to the model from 1979. The model stands out not only with great equipment, but also with perfect and faithfully processed bodywork details in the style of the 70s. A clipless body system is used for quick and easy battery replacement. The body simply snaps its beaks into the wheel arches.
The Ford Bronco is a legendary multi-purpose off-road vehicle (formerly MPV) manufactured by Ford from 1966 to 1996. The Bronco has been produced for more than five generations, including the new 2021 model.
The TRX-4 chassis features top-of-the-line technology with gantry axles, remote-controlled differential locks, and a remote-controlled two-speed transmission. You can switch between individual driving modes and the cruise control function is also available. For example, the model can be further equipped with a functional winch, multifunctional lighting and a wide range of other accessories (sold separately) . It is the top quality, the wide range of tuning parts and the possibility of gradual improvement that make the TRX-4 the best expedition model in the world.
New chassis
The new, modified TRX-4 chassis is built from two steel profiles that ensure sufficient rigidity of the chassis. Thanks to the proven location of the engine in the front part, sufficient load on the front wheels is ensured. The battery is located in the axis of the chassis, so the model is precisely balanced and does not tilt while driving. The mudguards are directly on the chassis and at the same time the body is snapped into them with the help of beaks.
Portal axles
The TRX-4 chassis uses gantry axles with an axle gearbox. The axle gearbox increases the ground clearance, reduces stress on the differentials, transmission, cardan shafts and further reduces the torsional force.
The front wheels can be turned by an angle of 45° to each side, the steering is provided by a Traxxas servo with metal gears. Thanks to the new chassis, the model achieved a great approach angle of 63°.
Two-speed gearbox
The model is equipped with a two-speed gearbox. Gear change is controlled by the red rocker switch on the transmitter. This solution makes the TRX-4 chassis a very versatile model that can drive slowly and quickly - as you need.
Lockable differentials
The differential locks are independently controlled by 2 servos. The power from the servos is transmitted via bowdens to the differentials. The shutters are controlled by a three-position switch on the transmitter and provide the following combinations:
Both differentials are open
Only the front differential is locked
Both differentials are closed
GTS oil dampers
Four oil-filled GTS dampers provide smooth damping and perfect handling. The aluminum bodies of the shock absorbers are equipped with a nut to adjust the preload of the springs. Maximum tightness of the shock absorber around the piston rod is ensured by special sealing X-rings.
Licensed bikes
The 1.9" TRX-4 Canyon Trail wheels are newly chromed and complete the overall look of the model, along with chromed bumpers and differential covers.
Clipless bodywork
The amazingly finished bodywork offers a lot of great details, such as chrome side moldings, rearview mirrors, wipers and front grille. The new system of fixing the body with beaks in the wheel arches ensures quick and easy battery replacement, and the appearance of the body is not disturbed by the clips. Dismantling the body can only be done by pressing the beak and pulling the body upwards. Fitting the body is even easier, just put it on the chassis.
Servo steering
The control of the model is ensured by the digital servo Traxxas 2075X high-torque, with a moment of 9 kg.cm. The servo is equipped with two ball bearings on the milled shaft and metal gears for maximum durability. Waterproof* construction.
Gearbox and differential servos
The model is equipped with a total of three waterproof* micro servos 2065 with a torque of 2.5 kg.cm. Two servos independently control the front and rear differential locks. The third servo then ensures the shifting of the two-speed gearbox.
Titan 21T engine
The model is powered by a Titan 21T 550 DC motor. The motor provides smooth operation from low revs. For better cooling, a propeller is integrated in the motor, blowing air to the rotor.
DC regulator
The heart of the Traxxas model is the XL-5 HV DC electronic controller. The regulator is intended for powering with a 2-cell or 3-cell LiPo battery. The model can also be powered by 6-7-cell NiMH batteries. Simple choice of driving modes and other settings, using the EZ-SET button. Indication of the status of the controller by an LED diode. LVD protection against undercharging of the LiPo battery. Thermal protection. Water-resistant* construction.
The Traxxas XL-5 HV controller supports 5 driving modes:
Sport : Drive forward, brake and reverse
Race : Drive forward and brake. Reverse is not available
Training : Forward driving limited to 50% power, braking 100% and reverse limited to 50%. this mode is suitable for children
Trail : Drive forward, brake, reverse. Handling near neutral is very subtle
Crawl : Driving forward, brake in neutral and straight back.
Traxxas TQi Four-Channel RC Kit with Bluetooth
In addition to precise and reliable control, the four-channel transmitter is also equipped with a slot for placing a Bluetooth module (sold separately). The Bluetooth module will allow you to connect the RC model with the clear graphic application Traxxas Link, which you can install for free on your smartphone.
The Traxxas Link app for Apple devices is available for free on the AppStore , the app for Google Android devices is free on GooglePlay .
The Traxxas Link App is a powerful application that gives you complete control over the operation and tuning of your Traxxas RC model with stunning visualization and absolute accuracy of settings. Traxxas Link can display telemetry data that the model provides in real time, such as speed, rpm, temperature, battery voltage and model roll. You can share settings of RC models, you can create any number of profiles for a specific track or user, e.g. children. All in the app with the brilliant graphics that come naturally from Traxxas.
Telemetry options vary by model. It may be necessary to install telemetry sensors to obtain telemetry data. Compatible telemetry parts with this model can be found in the "Accessories - Telemetry" section. More information on telemetry installation here.
Telemetry - model tilt
Using a wireless Bluetooth module (sold separately) and the Traxxas link app, it is possible to track the model's pitch on your phone. To display additional telemetry (battery voltage, revolutions, temperature) installation of telemetry sensors is required.
Traxxas TQi receiver
RC receiver Traxxas TQi 5 channel. TSM with telemetry for Traxxas TQi transmitters. Simple operation, pairing with a button. LED status indication. 3-axis MEMS sensors are integrated in the receiver for learning the position of the receiver.
The 5-channel receiver is also equipped with two connectors for connecting telemetry sensors RPM (revolutions) and V/T (voltage / temperature).
Furthermore, a telemetry expansion module can be connected to the 4-pin connector, into which you can connect up to 6 more sensors, including a very accurate GPS speed sensor.
Traxxas TRX-4 Ford Bronco RC Model Car Features
The model is completely assembled and ready to drive
Licensed clipless body based on a 1979 model
TRX-4 chassis with metal profiles
Remotely controlled differential locks
Remote controlled two-speed gearbox
Portal axles with gearbox
Powerful Traxxas Titan 21T DC motor
Traxxas XL-5 HV DC electronic controller with special modes
Turning the front wheels by 45° to both sides
Optimized geometry limiting the bump-steer effect (change in wheel toe-in depending on ground clearance)
Tires for excellent grip on the surface
Long driving time - with LiPo battery 11.1 V 5000 mA up to 2 hours
* Refer to the user manual for information on the water resistance specification. You can find tips and tricks for operating in wet conditions in the blog.
We recommend to buy
To operate the model, you need 4x AA batteries for the transmitter, a drive battery and a charger for the drive battery.
Recommended LiPo batteries
The model can be operated on a 2 or 3 cell LiPo battery. A 2-cell LiPo battery (7.4 V) is fully sufficient for normal riding. For operation with a higher speed range, a 3-cell LiPo battery can be used.
For normal riding, 2S LiPo battery Traxxas 7.4 V 5000 mAh
For normal riding and mechanical resistance 2S LiPo battery Traxxas 7.4 V 5200 mAh Hardcase
For normal riding and maximum driving time 2S LiPo battery Traxxas 7.4 V 7600 mAh
For demanding users and a high speed range 3S LiPo battery Traxxas 11.1 V 4000 mAh
Recommended NiMH batteries
NiMH batteries do not require precise handling and are therefore suitable if the RC model car is operated by children (NiMH batteries are not destroyed by complete discharge). However, NiMH batteries have a lower capacity and a higher weight, so the driving time will be slightly shorter.
NiMH 8.4 V 3000 mAh battery for normal riding
NiMH 8.4 V 5000 mAh battery for maximum driving time
Recommended Traxxas Chargers
Traxxas universal chargers can charge Traxxas LiPo and NiMH batteries. Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , thanks to which you are always sure to connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.
Universal chargers for batteries up to 3S LiPo
Traxxas EZ-Peak 50W Single Output Charger
Traxxas EZ-Peak 2x50W charger with 2 outputs
Universal chargers for batteries up to 4S LiPo
Traxxas EZ-Peak 75W Single Output Charger
Traxxas EZ-Peak Live 100W Single Output Charger with BlueTooth Phone Connection
Traxxas EZ-Peak Live 2x100W charger with 2 outputs and the option of BlueTooth connection to the phone
Wireless connection with the phone
By adding a Bluetooth module to the transmitter, you get the function of wireless connection of the RC model with the Traxxas Link application, which you can install on your phone for free. We recommend a phone holder for attaching the phone to the transmitter.
A clear graphic application enables simple model settings. The telemetry provided by the model can also be viewed in the application. Telemetry options for specific models are listed in our Traxxas RC Model Telemetry blog.
LED lighting
For a breathtaking look during evening adventure trips, we recommend fitting the model with original LED lighting. The lighting not only looks great, but also illuminates the road perfectly.
Constant lighting - All LED lights of this lighting are constantly on. The kit can later be upgraded to Pro Scale.
Pro Scale multifunctional lighting - realistic functions like on a real car (functional brake and reversing lights, functional turn signals and warning lights, adjustable headlight intensity). The possibility of remote lighting control using a phone via a Bluetooth module.
Both types of lighting can be supplemented with fender lighting.
Winch
The winch is an integral part of every expedition model that will pull you out of any terrain. The original Traxxas winch is accurately, to scale, designed for TRX models. The winch is controlled by a remote control and develops a pulling force of up to 4.5 kg. To install the winch, it is necessary to add a tuning bumper - (more in the description of the item).
Traxx tracks for every terrain
The new Traxx crawler chassis will give your TRX-4 an extraordinary, dramatic look, and you'll drive it like a dream through any terrain. The easy installation of this belt tuning kit delivers a virtually unstoppable power and traction upgrade.
Boat transport trailer
To transport your boat behind your model car in style, we recommend the Traxxas Spartan/DCB M41 tri-axle trailer or the Disruptor trailer. For an added dose of realism, the trailers can be further equipped with an optional lighting kit or an electric winch. More information in the description of the trailers.
Other accessories
Carrying bag and backpack
Carry the RC model comfortably and safely in a Traxxas sports bag or backpack. In addition to the main large pocket for the model, there are specially designed side pockets for batteries, charger, tools, etc.
Stand
The aluminum swivel stand will be the perfect addition to your service table or display shelf. The stand facilitates the maintenance of the model and at the same time prevents the deformation (stretching) of the tires during long-term standing.
Work mat
Work mat 91x51cm, for service of RC models and other modeling work. Prevents damage to the workbench, resistant to chemicals. Practical compartments for organizing parts and tools.
Bolt and bearing sets
Exclusive complete sets of screws and bearings are available for the model. You can use the sets when servicing the model, and as tuning for driving in wet conditions, we recommend the installation of a stainless steel set. You can find a complete overview of kits for Traxxas models in the blog.
Set of screws (blackened)
Screw set (stainless steel)
Bearing set (standard)
Bearing set (stainless steel)
Recommended tuning servos, required when using optional accessories (increase in model weight)
The TRX-4 model, as one of the most user-modified models, often gains 1-2 kg in weight due to accessories. When increasing the weight of the model, it is necessary to use a stronger servo. Newly sold TRX models already have a regulator with a powerful switching BEC source, and it is not necessary to use an external BEC source for stronger Tunig servos with a current draw of up to 5 A (short-term).
Recommended tuning servos:
Traxxas servo 2270 16.9 kg.cm MG waterproof
Traxxas servo 2250 24 kg.cm MG waterproof
Traxxas servo 2255 29 kg.cm BL MG waterproof, with AC motor
Traxxas servo 2280 50 kg.cm BL MG waterproof, with AC motor
Accessories for normal operation
For normal operation of the Traxxas RC car, you need bolt glue, good quality tire glue, silicone shock oil and a set of screwdrivers. We recommend an affordable set of tools for cars from our range.
The thread or head of the screw is dripped with screw glue, which fixes it and the vibrations caused by driving prevent the screw joint from loosening. The screw adhesive has a special composition that allows the screw connection to be easily loosened with an adequate torque without damaging the screw head. Never use ordinary instant glue, it might be impossible to loosen a screw stuck like this!
Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!
Sometimes it is necessary to add silicone oil to the dampers of the model. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. For these cases, the so-called repair kits. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are delivered to all shock absorbers. Piston rods with a TiN surface are easily recognized by their golden-green color.
Alkaline battery LR6 AA is designed for devices with low current consumption, shelf life up to 7 years, leakage protection, working temperature -20 ° C to +60 ° C.
Robitronic bag for expedition cars has dimensions of 29 cm x 47 cm x 14 cm, at the end of the hem is a drawstring. The length of the ear is about 30 cm. Sturdy stitched fabric with firm handles. Save
Special instant glue Robitronic Tire Glue designed for gluing tires to RC car discs. The adhesive is flexible after solidification, thus minimizing the risk of the tire tearing at the joint. O
The Traxxas 13-bit screwdriver (Master set) contains a Premium handle with interchangeable Allen bits 1.5, 2.0, 2.5, 3.0 mm, ball bits 2.0, 2.5, 3.0 mm and socket bits 4.0, 4.5, 5.0, 5.5, 7.0, 8.0 mm.
Replacement Stems for Traxxas Premium Screwdriver or Cordless Screwdrivers, with 2.0mm and 2.5mm Allen End Caps. The stems are made of high quality HSS steel.
Replacement shafts for Traxxas Premium Hand Screwdriver or Cordless Screwdrivers, with 1.5mm Allen, 2.0mm and 2.5mm. The stems are made of high quality HSS steel.
The Traxxas circular saw is used to precisely circle holes in car bodies up to a diameter of 15 mm. A practical aid for modelers, the cutting part with 2 knives is made of high-quality steel, the handle is made of aluminum.
The Traxxas reamer is used to precise holes in car bodies up to 15 mm in diameter. Practical tool for modellers, cutting part with 2 knives is made of quality steel, handle is plastic.
Dual charger Traxxas EZ-Peak Plus for NiMH and LiPo batteries. Thanks to today's very common RFID technology, the charger itself identifies the connected types of batteries and sets the charging param
A revolutionary way to charge batteries! Just connect a NiMH or LiPol battery with an ID connector and press the Start button. The charger detects the type and number of batteries and starts charging.
A revolutionary way to charge batteries thanks to EZ-Peak Live Dual 2x100W! Just connect a NiMH or LiPol battery with an ID connector and press the Start button. The charger detects the battery parame
Traxxas charger EZ-Peak Plus 75W, for extremely simple and safe charging of Traxxas batteries. Automatic recognition of Traxxas iD batteries. High performance - charging current up to 8A. Charging
The Traxxas USB-C charger with a maximum power of 40W is intended for charging Traxxas batteries 2-3S LiPo or NiMH (7.2-8.4 V) with an iD connector. The charger automatically recognizes the Traxxas iD battery type and automatically sets the optimal...
With regard to the new 4-cell LiPo batteries for the Traxxas X-Maxx 8S models, there is a new adapter for two to four-cell LiPo batteries Traxxas with iD connector. Part of the adapter output is a con
The new Traxxas iD system is the easiest way to charge your batteries! Thanks to today's completely common RFID technology, the charger itself identifies the connected battery type and sets the charging parameters by itself. Just plug in the battery...
Traxxas LiPo battery tester with integrated balancer. Accurate and immediate measurement of individual cells always at hand. Possibility of connecting a 1 to 6 cell battery via the included adapter. I
Traxxas precision modeling knife with 5 blades. Aluminum handle with non-slip surface and engraved Traxxas logo. Attaching the blades with collets. High quality carbon steel blades.
The Traxxas rubberized screwdriver handle is equipped with a comfortable practical rubber ergonomic handle, which guarantees a pleasant grip and a long service life. Traxxas exchangeable bits can be inserted into it as well as other standard bits.
The Traxxas screwdriver handle large is equipped with a comfortable practical rubber ergonomic handle that guarantees a comfortable grip and a long service life. Traxxas exchangeable bits can be inserted into it as well as other standard bits.
The Traxxas screwdriver with interchangeable bits (Master set) contains a Premium handle with interchangeable Allen keys 1.5, 2.0, 2.5, 3.0 mm and ball bits 2.0, 2.5, 3.0 mm. Tool case with embroidere
The Traxxas screwdriver with interchangeable bits (Essential set) contains a Premium handle with interchangeable hex bits of 1.5, 2.0, 2.5 mm and plug-in bits 5.0, 5.5, 7.0, 8.0 mm. Tool case with emb
Traxxas set of silicone oils (7x 60ml) with swivel stand. Silicone oil bottles with viscosities - 200cSt, 350cSt, 500cSt, 600cSt, 700cSt, 900cSt, 1000cSt, with cap and nozzle for fast as
Lithium grease is used to lubricate bearings or servo gears . It is water and moisture-free, does not corrode, has excellent antioxidant effects, wide range of operating temperatures, very good
Traxxas ball bearing with an inner diameter of 10 mm, an outer diameter of 15 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 15 mm, an outer diameter of 21 mm and a width of 4 mm with a double-sided rubber seal of black. There are 2 pieces of bearings in the package.
Traxxas ball bearing with an inner diameter of 4 mm, an outer diameter of 10 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 10 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 11 mm and a width of 4 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 5 mm, an outer diameter of 8 mm and a width of 2.5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 6 mm, an outer diameter of 13 mm and a width of 5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas ball bearing with an inner diameter of 7 mm, an outer diameter of 14 mm and a width of 5 mm with a black-sided rubber seal on both sides. The package contains 2 pieces of bearings.
Traxxas 3975 550 Series DC Motor with 21 turns with reverse rotation. The motor is intended for DC versions of the E-Maxx, E-Revo, or TRX models. For better cooling, a propeller is integrated in the motor, blowing air to the rotor.
Traxxas long ball joint ends. Designed for rods with M3 threads, hole for ball pin with a diameter of 5.5 mm. The set also includes ball pins with a 3 mm hole.
Traxxas 5 Channel Traxxas Receiver for Traxxas TQi with Integrated Telemetry and Traxxas Stability Management (TSM). The receiver is compatible with the older version of the TQi transmitters (p
Traxxas silicone grease is suitable for lubricating differentials or parts that may be in direct contact with water, eg cross joints, half axles, open gearboxes, and so on. Silicone va
Complete universal wheels. Chrome wheels with Canyon Trail tires for TRX-4 Ford Bronco (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118x48 mm. The carrier is a 12 mm hexagon with of
XL-5 HV DC controller for Traxxas 1:10 scale DC motor driven cars. Powered by up to 3S LiPol batteries. 5 driving modes, including Crawler and Trail mode.
The BlueTooth module is used for wireless connection with the Traxxas TQi BlueTooth Ready transmitter and the Traxxas Link application, which is intended for mobile de
Traxxas Body Chevrolet Blazer 1972 Clear. Requires painting, including grille, mirrors, door handles, wipers and clipless mounting system. Designed to mount on #8072X.
Traxxas Body Chevrolet Blazer 1972 Red. Complete painted bodywork, including radiator grille, mirrors, door handles, wipers and clipless mounting system. Designed to mount on #8072X.
Conversion kit for the Traxxas TRX-4 chassis allowing the wheelbase to be increased from 312mm to 324mm. Includes rear upper and lower suspension rods, front and rear shock towers and axle drive output shaft.
Conversion kit for the Traxxas TRX-4 chassis allowing the wheelbase to be reduced from 324mm to 312mm. Includes rear upper and lower suspension rods, mudguards, outer drive shaft, modified battery holder and fasteners.
Remote controlled winch for all RC models of the Traxxas TRX-4 and TRX-6. Realistic processing. Tah 4.5 kg. 120 cm long tow rope. Quick manual unwinding function 2 channel control for steering on
Tuning conversion set in red for the Traxxas TRX-4 chassis enabling higher wheel lift. The set contains all the necessary parts needed for the conversion.
Complete LED lighting for TRX-4 Ford Bronco or Ford F-150. Original light kit. Precisely shaped front LED lights. Backlight for tail lights and side indicators. Power supply module included in the package.
Traxxas Complete Pro Scale LED Lighting Kit for TRX-4 Ford Bronco 1979 or Ford F-150 (1979). Functional brake and reversing lights, functional turn signals, functional warning lights, taillights, adjustable headlight intensity. Possibility of...
Traxxas set of stainless steel ball bearings for TRX-4 RC car models. Upgrade the bearings on your model to stainless steel for long-lasting performance in wet conditions. The bearing set is packed in a box with compartments and a label for...
Traxxas 3.17 mm (1/8 ") shaft pinion with 10 teeth and 32DP (0.8 mm) gear module for RC car models. Made of sintered steel. The package includes a worm.
Traxxas 3.17 mm (1/8 ") shaft pinion with 20 teeth and 32DP (0.8 mm) gear module for RC car models. Made of hardened tool steel. The package includes a worm.
Traxxas installation kit required to install Pro Scale lights is for TRX-4 1979 Ford Bronco, 1979 Ford F-150 and 1979 Chevrolet K10 RC cars. Includes bracket, reverse light harness, mounting hardware.
Standard size digital servo for 1:10 RC car models, Traxxas 2075R, plastic body, waterproof*, has a torque of 9 kg.cm @ 6V and a speed of 0.17 s/60° @ 6V. Metal gears, pair of bearings, dimensions: 20x41x36mm, weight 54g. Thousand square 25T
Standard size digital servo for 1:10 RC car models, Traxxas 2250, waterproof, aluminum body, has a torque of 24 kg.cm @ 6V and a speed of 0.19 s/60° @ 6V. Metal gears, dimensions: 41x20x43mm, weight 68g. Thousand edge 25T
Standard size digital servo for 1:10 RC car models, Traxxas 2255, waterproof*, aluminum body, has a torque of 29 kg.cm @ 6V and a speed of 0.15 s/60° @ 6V. Metal gears, dimensions: 41x20x43mm, weight 68g. Thousand square 25T
Standard size digital servo for 1:10 RC car models, Traxxas 2270, waterproof, plastic body, has a torque of 16.9 kg.cm @ 6V and a speed of 0.175 s/60° @ 6V. Metal gears, dimensions: 41x20x45mm, weight 68g. Thousand square 25T
Standard size digital servo for RC car models 1:10 to 1:8, Traxxas 2270, waterproof, finned aluminum body, has a torque of 50 kg.cm @ 7.4V and a speed of 0.09 s/60° @ 7.4V. Metal gears, dimensions: 41x20x44.5mm, weight 68g. Thousand square 25T
GTS tuning aluminum shock absorbers with Teflon (PTFE) insert and rods with titanium nitride (TiN) coating designed for RC chassis of Traxxas TRX-4 car models.
Traxxas BEC source for receiver and servos. The source is necessary where a higher consumption of servos is expected. The kit includes accessories for mounting on the chassis. The power supply must be
Transport your Traxxas Disruptor boat to the water in style with the detailed dual-axle trailer. The trailer includes an aluminum frame, folding front stand, body supports, rubber tires and elastic mounts. Trailer can be towed behind TRX-4/TRX-6 and...
Transport your Traxxas Spartan/DCB M41 boat to the water in style with the detailed 3-axle trailer. The trailer includes an aluminum frame, a collapsible front stand, height-adjustable bed supports, rubber tires and elastic mounts. The trailer can be...
Silicone inserts 1.9" provide excellent flexibility for better tire grip and traction. The inserts are water resistant. Suitable for 1:10 scale RC car models of Crawler / Expedition type (TRX-4, SCX10). Dimensions o108x48 mm, weight 80 g (4pcs - 320 g).
Silicone inserts 1.9" provide excellent flexibility for better tire grip and traction. The inserts are water resistant. Suitable for 1:10 scale RC car models of Crawler / Expedition type (TRX-4, SCX10). Dimensions o108x48 mm, weight 80 g (4pcs - 320 g).
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Black anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Gray anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum reinforcement bead lock ring wheel Method 105 1.9 ". Red anodized surface. The package contains a total of 4 pieces of ring with a set of screws M2x10 mm with countersunk head.
Traxxas aluminum bead lock collar ring Method 105 2.2 ". Black anodised surface. The package contains a total of 4 rings with a set of countersunk M2x10 mm screws.
Traxxas aluminum reinforcement bead lock ring discs Method 105 2.2 ". Blue anodized surface. The package contains a total of 4 pieces of ring with a set of M2x10 mm countersunk screws.
Traxxas aluminum bead lock wheel ring Method 105 2.2 ". Gray anodised surface. The package contains a total of 4 rings with a set of M2x10 mm countersunk head screws.
Traxxas aluminum bead lock collar ring Method 105 2.2 ". Green anodised surface. The package contains a total of 4 rings with a set of countersunk M2x10 mm screws.
Traxxas aluminum reinforcing bead lock ring discs Method 105 2.2 ". Red anodized surface. The package contains a total of 4 pieces of ring with a set of M2x10 mm countersunk screws.
Complete universal wheels. Chrome wheels with Canyon Trail tires for TRX-4 Chevrolet blazer (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118x48 mm. The carrier is a 12 mm hexagon s
Complete universal wheels for RC car models TRX-4. Method 105 discs in chrome-black, blue beadlock, with Canyon Trail tires (2 pcs in a package). Disk size o53x26mm mm. Overall dimension o118
Complete universal wheels for RC car models TRX-4 with beadlock rings . Method 105 discs in chrome-black with Canyon Trail tires (2 pcs in a package). Disk size o53x26mm mm. Total year
Complete universal wheels for RC car models TRX-4. Black Discs TRX-4 Sport with Canyon Trail tires (2 pcs in a package). Disk size 53x26 mm mm. Overall size 118x48 mm. The carrier is a 12 mm hexagon
Wheel disc 2.2 "Method 105 gray chrome-plated with the possibility of installing bead lock rings. The package contains 2 pieces of discs. The discs are suitable for the Traxxas TRX-4 chassis.
Traxxas wheel 1.9 ", chrome-plated disc, Canyon Trail (4) tires - complete, with glued tires, including hub caps. Soft compound S1. Designed for mounting on part TRA8255.
Traxxas wheel 1.9 ", classic chrome disc, Canyon Trail (4) tires - complete, with glued tires, including hub caps. Soft compound S1. Designed for mounting on part TRA8255.
Complete wheels. Black discs with Canyon Trail tires for RC models of TRX cars in 1:10 scale (2 pcs in a package). Wheel size o53x27mm mm, tire size o120x46 mm. The carrier is a 12 mm hexagon with off
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation blue Beadlock ring, Canyon Trail tire (2 pcs in a package). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation green Beadlock ring, Canyon Trail tire (2 pcs in a pack). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
Complete universal wheel for TRX-4 RC car models. Gray TRX-4 Sport disc with imitation red Beadlock ring, Canyon Trail tire (2 pcs in a package). Disc size 48x35 mm. Total size 137x52 mm. The driver is a 12 mm hexagon.
Traxxas combined power adapter for ID connector - allows easy powering of other components from the battery. It contains a connector for connecting a voltage sensor. Mounting without soldering.
The temperature sensor holder for all Traxxas electric cars allows easy mounting of the thermocouple on the engine casing or its radiator. Easy and fast mounting.
The expansion telemetry module 2.0 connects to the 4-pin connector on the 6533 receiver. Thanks to the expansion module, you can use a new GPS sensor with support for GPS and GLONASS satellites for ma
They extend the telemetry 2.0 module with the GPS 2.0 module already installed. Thanks to this system, you can monitor the very accurate speed of the model in the Traxxas Link application. In a
The GPS sensor connects to the TRA6550X expansion telemetry module. Thanks to the GPS sensor, you can, thanks to the support of GPS and GLONASS satellites, measure the speed relative to the earth's su
Temperature sensor for expansion telemetry module. The sensor consists of a thermocouple, the sensor can be used to measure the temperature of the electric motor, internal combustion engines, regulato
Voltage sensor for expansion telemetry module. The sensor measures the supply voltage against zero voltage. The voltage sensor is automatically detected, no adjustment is required.
