Express delivery
Large selection of carriers
Satisfaction guarantee
The GTPower C6D 100W is a small, easy-to-use, easy to use universal mains charger for home charging of all types of batteries. The C6D Mini allows
to charge and discharge common cell types (NiCd, NiMH, Li-Poly, Li-Ion, Li-Fe, LiHV, Pb),
plus a built-in four-channel balancer that ensures very safe
and comfortable charging of lithium batteries.
"Mains power 100-240 V / 50-60
Hz
"For charging and discharging 6-8 NiCd / NiMH cells, 2-4 Li-ion / Li-poly / Li-Fe / LiHV
cells or 6-12 V lead-acid batteries
"Adjustable charging current (0.1
A - 10.0 A)
"Adjustable Discharge Current (0.1 A - 2.0 A)
"Max power
to charge 100 W, to discharge 10 W
"Automatic charge and discharge mode
for NiCd, NiMH with adjustable current limit
"Finish charging with
delta-peak automatics for NiCd and NiMH batteries
"Lithium and Pb batteries
are charged by constant current / constant voltage"
"Adjustable sensitivity
delta-peak detection for NiCd and NiMH batteries
"Adjustable Charging and Discharge Voltage
for lithium batteries
"Repeated cyclic operation
charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
"Four
charging modes for lithium batteries - normal charging, fast charging,
with balancer charging and storage charging / discharging. The last two modes require connection of
balancing kit service connector, in other modes it can charge
with or without balancer.
"Stop charging when set time,
charge or limit temperature is exceeded.
"Memory for 5 charge / discharge programs
for each battery type.
"Measurement of the total voltage of the set and individual cells
(for lithium batteries).
"Measurement of total internal resistance of a set and individual
cells (for lithium batteries).
"Temperature sensor socket. < br /> "Output
socket of the XT60 charger.
"Two-line backlit LCD display with simple a
clear menu and parameter display during charging / discharging
"A number of warning text messages contribute to safe
operation - incorrect input voltage, wrong
wiring, inappropriate battery or battery condition, incorrect polarity at output
"Reverse polarity protection and short circuit on output.
"Compact plastic cabinet, small size
"Built - in fan for forced cooling
"Built - in power supply.
The charger is equipped with an
XT60 output socket and a versatile JST-XH service connector, allowing
to directly connect battery power cables and JST-XH 2-6S service connectors - if
you are using XT60 and JST-XH connector kits, you can do without
and adapters. To connect the service connectors of other systems, you can use standard
Sky RC or RC System adapters to cut off the 5th and 6th channel output connector part
.
To measure the temperature of the charged / discharged batteries, you can
purchase a temperature sensor.
Note: The charger uses 2.40 V / cell to charge lead-acid batteries
and is therefore suitable for charging conventional
lead-acid batteries and gel batteries with a reversible valve .
For charging gas-tight gel batteries that must not be charged more
than 2.30 V / cell, not applicable.
The charger kit includes: charger GTPower
C6D 100W charger, mains cable, instructions .
Parameters:
AC input voltage AC 100 ~ 240V
Charging power max .: 100W
Discharge
Max: 10W
Charge current range: 0.1 ~ 10A
Discharge range: 0.1 ~ 2.0A
Charging
modes :: LiPo / LiHv / LiFe / Lilon 2 ~ 4 cells
NiCd / NiMH 6 ~ 8 cells
Pb
Battery Voltage 6V (3P) ~ 12V (6P)
Balance current: 300mA per cell
Dimensions
115 * 112 * 55 mm
Output Power Connector: XT60
XT60 / Dean-T cable included
Weight 302g
