- -27.98 €
Scirocco L 4.0m ARF
Express delivery
Large selection of carriers
Satisfaction guarantee
Package contents
The package contains parts for the RC model glider Scirocco L and Manual DE.
Characteristics
Scirocco L is a high-performance RC model of the F5J glider with a span of 4 m, a modern construction with a laminate fuselage and a composite wing with a HN-354 profile. Suitable for flying in thermals, on a slope or for competition flying. Clean aerodynamic shapes, finished coloring. ARF version.
The fuselage is laminate, reinforced with carbon reinforcements, the wing is 4-flap with flaps and ailerons. The elevator is floating, two-part, the wing is divided into 3 parts. The set is in the ARF version without electronics and drive. You will need to add a motor, a controller, a cone with a tilting propeller, servos with cables, a battery and an RC kit to the model.
Properties Scirocco L 4m PNP
- Laminate painted hull with carbon reinforcements
- The composite wing is painted into molds, reinforced with carbon
- Finished coloring in molds, perfectly smooth surface
- 4-flap wing flap (ailerons and flaps)
- The rudders are rotatable on the cover
- Spacious battery compartment and large fuselage cover
- Floating elevator
Spacious hull
The design of the Scirocco L ARF kit does not include electronics or motor, so it is necessary to add your own equipment. There is enough space in the fuselage for the assembly of the drive, the propeller cone is recommended with a diameter of 45 mm.
Floating elevator
The floating elevator slides onto a carbon tube with a diameter of 5 mm. The rudder has a rudder lever inside the fuselage, so the tail surfaces are aerodynamically completely clean / p>
Composite wing
The wing is completely made in molds, so it has precise shapes, a smooth surface and high strength. The centerplane is one-piece, to which the outer parts of the wing are attached with connectors.
We recommend buying
The Scirocco L model is delivered as an ARF kit without equipment. It is therefore necessary to install a motor, a cone propeller, a controller, a receiver, servos, a battery, cables with connectors and have a transmitter and charger available in the model.
Recommended transmitters Spectrum of the new generation of the NX series
We recommend modern SPEKTRUM NX programmable transmitters for controlling aircraft models:
- 6-channel transmitter series NX Spectrum NX6 DSMX, AR6610T with Smart compatibility, USB and WiFi connection .
- 8-channel transmitter series NX Spectrum NX8 DSMX, AR8020T with voice output, Smart Technology compatibility, USB port and WiFi connection .
- NX Spektrum NX10 DSMX series 10-channel transmitter with the latest trends, voice output, Smart Technology compatibility, USB port and WiFi connectivity .
Recommended batteries
To power the model, we recommend a propellant LiPol battery with 4-6 cells (14.8–22.2V).
- For economical flying LiPo battery 4S Black Magic LiPol Car 14.8V 5000mAh 50C EC5 with EC5 connector.
- Higher power 6S Spectrum Smart LiPo 22.2V 4000mAh 50C IC5 with EC5 connector and Smart technology.
Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.
Recommended chargers for conventional and Smart batteries
If you decide to use modern Smart LiPo batteries in RC aircraft models, then we recommend the following chargers:
- Charger with mains power supply Spektrum S1100AC with one output 1x100W .
- Charger with mains power supply Spektrum S2100 with two outputs 2x 100W .
Recommended modern chargers for Smart batteries
- High performance AC charger Spektrum Smart G2 charger S1400 1x400W AC with one output 400W .
- High performance AC charger Spektrum Smart G2 charger S2200 2x200W AC with two outputs 2x200W .
There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.
Accessories for normal operation
For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). The Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.
For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g
Protective covers for batteries
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.