Shopping Cart
There are no more items in your cart
18x35mm (2 pcs)
Cadet
3BB5066
Billing Boats
Sophisticated RC model of a 540 mm long motorboat with a plastic hull from the Danish company Billing Boats. Kits in bulk for beginning shipbuilders.
Express delivery
Large selection of carriers
Satisfaction guarantee
Billing Boats
In the early 50s Danish architect and former wartime RAF pilot Ejnar Billing exhibited a self-made model of a fishing boat in the window hobby store belonging to his wife. After the photo of the model appeared in a magazine, Mr. Billing overwhelmed in order to position dozens of pieces of the same model. Because it was not in his power so much to handle, it occurred to him that the boat will offer a kit - the first mass-produced kit with wooden frames with the keel, ribs and planking hull design mimicking the most real ship. This method of construction is quickly befriended by Mr billing models and began to conquer the world. In 1958, then founded the company bearing the family name still Billing Boats. Over the years, the design perfected and upgraded models in the '60s introduced the use of plastic moldings hulls, then embarked on CNC machines at the turn of the 80s and 90s in Billing Boats started to benefit from laser cutting parts. Today the company manages the third generation billing and floating RC models and mock-leafing table still represents the ultimate in marine modeling.
We are pleased to offer a series of kits Billing Boats from which you can build a gorgeous elaborate mock-ups floating remote control or create a stylish complement your interior with salty smell of the sea and the call of faraway places ...
Cadet
Cab model speedboat with a simple structure designed for novice boat builders.
Kadet has a body formed by plastic molding plywood with internal stiffeners, deck and superstructure made of plywood and plastic parts. The kit includes a molded plastic hull and all other plastic and wooden parts needed to complete the model, dummy accessories (eg. Position lights, anchor, lifebuoys etc.) , Marine shaft sleeve and the propeller.
To drive model includes a DC motor series 400 or 500, 20-30 A bidirectional controller (depending on engine) and 6 articulated NiMH or 2S LiPo battery with a capacity of 3 to 5000 mAh.
For basic operation, in principle, sufficient even the most ordinary two-channel radio system; to control the rudder servo meet the current standard. But for right maketáře of course, is "duty" adding as much maketových functions (lights, sound module, etc.), which will require the use of multi-channel RC system - and the channel is never enough.
| Length [mm] | 540 |
| Width [mm] | 160 |
| Height [mm] | 250 |
| controlled functions | M, LK |
| Building intensity | S1 |
| Difficulty piloting | P1 |
Brass anchor light 8x10mm on 70mm brass rods with a diameter of 2 mm.
Last items in stock
35x35mm (2 pcs)
45x50mm (2 pcs)
Last items in stock
Last items in stock
Last items in stock
Wire copper eyelet with a diameter of 2 mm with a shank, total length 11 mm (100 pcs).
Wire brass eye with a diameter of 3 mm with a shank, total length 10 mm (100 pcs).
22x65mm (2 pcs)
Last items in stock
25x65mm (2 pcs)
Last items in stock
25x95mm (2 pcs)
26x80mm (2 pcs)
Last items in stock
Brass mast light 8x12mm 2pcs. Inner bore 6 mm, hole in flange 6 mm.
Last items in stock
Brass light on the top of the mast 4x7 mm (2pcs).
Last items in stock
Brass position light 8x12mm 2pcs. Internal hole 5mm.
Brass position light 4x6mm 4pcs. Internal hole 3 mm.
Brass railing post 15 mm with 3 holes for ropes with a diameter of 1 mm.
Brass railing post 26 mm with 1 hole (in the middle) for a rope with a diameter of 1 mm (10 pcs).
Brass railing post 30 mm with 2 holes for ropes with a diameter of 1 mm.
Brass railing post 38 mm with 2 holes for ropes with a diameter of 1 mm.
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Plastic frame of the round ship window - port - with an outer diameter of 6 mm with 5 mm shoulder; hole diameter 3.5 mm. Without glass.
Last items in stock
Brass frame of the round ship window - port - with an outer diameter of 10 mm with 9 mm shoulder; hole diameter 7 mm. Without glass.
Last items in stock
Last items in stock
Last items in stock
5x8mm (4 pcs)
Brass stern (trailing) light 11x20mm - own light has a diameter of 6 mm and a height of 8 mm.
Brass stern light (trailing) light 14x20mm - own light has a diameter of 8 mm and a height of 12 mm.
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Last items in stock
Tap to zoom
