Shopping Cart
There are no more items in your cart
- -2.68 €
Krick Cabin boat Müritz kit
KR-20350
Krick Modelltechnik
RC boat model kit from Krick, Müritz cabin boat. Semi-scale model of the ship, length 650 mm, width 220 mm, detailed design, classic wooden plywood construction, suitable for beginners.
Express delivery
Large selection of carriers
Satisfaction guarantee
The police boat Müritz is very well known from the GDR. The designer was Karl Schulze, the boat has a very clear shape that will be appreciated by all ship modellers. Krick company has prepared for you a semimaket of a classic wooden boat. The less experienced engineer should handle the ship.
Required accessories to complete the Müritz kit
- Two-channel RC ship management kit
- Servo standard for rudder control
- Controller for motor control
- DC motor 600
- NiMH 7.2 V powered battery pack with a capacity of at least 2000 mAh
- Wood glue and paint to complete
Straight pliers for ball joints, size 3.45 mm, total length 14 cm.
H-Speed black acrylic spray paint is suitable for a wide range of materials including lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
H-Speed blue acrylic spray paint is suitable for a wide range of materials including lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
H-Speed Yellow Fluorescent Acrylic Spray Paint is suitable for a wide range of materials including Lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
H-Speed red acrylic spray paint is suitable for a wide range of materials including lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
H-Speed white acrylic spray paint is suitable for a wide range of materials including lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml.
H-Speed Tinting Acrylic Spray Paint is suitable for a wide range of materials including Lexan bodywork. The advantage is a short drying time, excellent coverage and scratch resistance. Content 150 ml. Ideal for imitating tinted car windows.
A special grease with a grease nipple for the lubrication of ship shafts by RC boats is an essential complement to all ship modelers. The special composition ensures smooth running of the shaft in the
A special lubricating grease for lubricating RC ship shafts is a necessary accessory for all ship modelers. The special composition ensures smooth operation of the shaft in the Teflon tube while maint
Modelcraft metal folding knives, set in three sizes. Standard knife for everyday work in the workshop, you can choose the right size. Steel blades can be easily broken off and available again
Modelcraft cutting knife A6 is a do-it-yourself kit that includes a cutting pad made of 3-layer sandwich PVC and a modeling knife with 6 different interchangeable blades. For crafts
Modelcraft folding metal knife with 10 blades 9x0.3mm. Standard knife for normal work in the workshop. For craftsmen, modelers and professionals.
The Modelcraft mini pliers set in the case forms a complete package of precise mini pliers. Classic combined, splitting classic and straight, narrow, curved pliers are included in the package. Pliers
Modelcraft modeling knife large # 5, with blade # 24. Aluminum holder, 115mm plastic handle for heavy duty work, deburring, stripping and sealing, plastic, hard d
Modelcraft set of 3 knives with 13 blades consists of 3 holders size # 1 small, # 2 medium and # 5 large and 13 different blades. Use for fine straight and round cuts. For craftsmen, modellers and pro
Modelcraft tools with cutting mat (set of 15pcs) is a 15-piece set of tools for craftsmen, modellers and do-it-yourselfers. Includes cutting mat A5, knife no.5 with spare sheets, 5pc clamps 50mm, 1pc
Modeling reamer with scale for holes up to 14mm.
Medium consistency Robitronic cyanoacrylate adhesive. Content 20 ml.
Roket Cyano Gel is an ethyl cyanoacrylate gel consistency adhesive. Glue consistency can be applied to vertical surfaces from which it does not flow. IC-Gel is applied only by squeezing the tube on
Roket Rapid is a medium density cyanoacrylate adhesive. It can also be used in cases where glue has to bridge gaps. The adhesive is applied to one surface only, and both parts are then pressed firmly
ROMARIN Lubrication for ship shafts GLS 80g. Special lubricating grease for lubrication of RC ship shafts is necessary for operation, special composition ensures smooth operation of the shaft while ma
Spektrum conversion cable with connectors IC3 battery (female) - IC2 device (male). Cable including data cable.
Spektrum conversion cable with connectors IC5 device (male) - IC3 battery (female), length 10cm, cable 10 AWG. Can be used to charge Smart batteries with IC5 connector Spektrum Smart chargers with only IC3 output. Cable including data cable.
Steering wheel 5-channel RC transmitter DX5 Pro 2021 with Spektrum Smart technology with receivers, SR2100. Lightweight, precise transmitter with display and advanced functions - setting of
Affordable Spektrum DX5C 5-channel RC steering kit with DSMR modulation, telemetry and support for Spektrum Smart technology. Memory for 20 models, large graphic
Affordable Spektrum steering wheel RC kit, 6-channel DX6C transmitter with DSMR modulation, telemetry and Spektrum Smart technology support. Memory for 20 models, large graphic LCD display, intuitive control. Including SR315 3-channel rece
Spektrum steering wheel RC kit, high-end 6-channel iXSR transmitter with DSMR modulation, color display, touch control and Android system. Accent lighting, incl. flashlights, precise hall probes , extensive programming options. Support
Mains switched stabilized power supply Spectrum power supply 24 V 16 A for powering chargers or other devices. The cooling fan is active with automatic speed control, overtemperature protection, over
Speed Epoxy II 4 min epoxy adhesive is suitable for parts that are exposed to vibrations. It creates a long-term flexible and strong connection. The joint can be stressed after 15 minutes, full streng
Spektrum Smart S100 USB-C charger with power up to 100W, new user interface and integrated connectors IC3 and IC5. Charges batteries 1-4 cells LiPo, LiIon, LiHV, LiFe and 1 to 12 cells Smart NiMH batteries. Charging current up to 6 A.
The new generation Spektrum Smart G2 S1100 1x100W AC charger with SMART technology brings the most modern user-friendly environment, button control, output with IC3/IC5 connectors and a 320 × 240 IPS LCD display. USB output 5V / 2A. Modern ergonomic...
Spektrum Smart S2200 2x200W AC charger of the new generation with two outputs of 200W each and SMART technology, brings the most modern user-friendly environment, button control, output with IC3/IC5 connectors, 320 × 240 IPS LCD display and USB output...
The Spektrum S250 charger with 2x 50W charging power of the new generation with SMART technology offers easy charging, two independent outputs, IC3/IC5 output connectors, color LCD display. LiFe/LiIon/LiPo/LiHv (1-4 cells), NiMH/Cd (1-12 cells),...
Do you have your off-road RC model and need a rugged and well-equipped RC transmitter? The Spectrum DX5 Rugged is this transmitter, its casing is protected from shock by softened rails all over the pe
A standard size digital servo for 1:10 RC car models, the Spektrum servo S6020 has a torque of 10.5kg.cm @ 6V and a speed of 0.19s/60° @ 6V. Metal + 1 nylon gears, 2 balls. bearings, dimensions: 41x20x39 mm, weight 49g. Thousand-sided 23T
Spektrum S650 standard size servo. Nylon gears, power supply 6V, moment 5.9 kg.cm, speed 0.12 s/60°, waterproof, dimensions 40x20x39.4mm, weight 50g, 23T thousandths. Replaces the ADS-5 servo.
Spectrum servo standard size S651. Metal gears, waterproof, power supply 6-7.4V, moment 6.3-7.4kg.cm, speed 0.143-0.122s/60°, dimensions 40x20x39.4mm. Thousand-sided 23T. Replacement for the ADS-7M servo.
Standard size digital servo for 1:10 RC car models, Traxxas 2056, plastic body, waterproof*, has a torque of 6.2 kg.cm @ 6V and a speed of 0.20 s/60° @ 6V. Nylon gears, dimensions: 20x41x36mm, weight 45g. Thousand square 25T