Charging cable 50cm from G4 to Futaba, Sanwa, Graupner, JR RX/TX connector
L499201
LRP Electronic
Express delivery
Large selection of carriers
Satisfaction guarantee
This charging cable is 50cm long and comes with G4 charger connection and Futaba,Sanwa,Graupner,JR RX/TX output connector.
With 50cm Silicon-Flex cables and premium 4mm gold connectors, this charging cable is perfectly suited for its use.
For protection and reliable operation, these charging cables are equipped with a protective net and a shrink tube on both sides with a printed LRP logo.
A range of general purpose charging cables are available with different connectors.
Dimensions: 51x38x20 mm, weight 84g, Connector: JR / Hitec
Dimensions: 84x30x17 mm, weight 91g, Connector: JR / Hitec
Dimensions: 56x31x31 mm, weight 99g, Connector: JR / Hitec
Dimensions: 61x43.5x11mm, weight: 59g, Connector: JR/GRAUPNER. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Capacity: 2000mAh, 4 cells, voltage: 4.8V, weight: 110g, dimensions: 54x30x30mm and connector: JR/HITEC
Capacity: 2000mAh, 4 cells, voltage: 4.8V, weight: 108g, dimensions: 57x53x15mm and connector: JR/HITEC
Tx
4.8V 2000AA ENELOOP Sanyo Tx (Flash 7, LYNX 4S, T6K, T10J, T3PV) 4 pcs. areas
Kavan
KAV33.1061804F
Battery pack 4.8 V NiMH with low self-discharge "tailor-made" for transmitters Hitec Flash 7 and LYNX 4S, Futaba T3PV, T4PM, T7PX, T7XC, T6K, T10J.
Dimensions: 87x43,5x12,5mm, weight: 99g, Connector: JR / GRAUPNER
Capacity: 2000mAh, 5 units, voltage: 6V, weight: 136g, dimensions: 71x53x15mm and connector: JR/HITEC
Capacity: 2000mAh, 5 cells, voltage: 6V, weight: 134g, dimensions: 52x43x27mm and connector: JR/HITEC
Microprocessor quick charger controlled by touch screen with balancer for 1-14 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / Li-F / LiHVe, 2-20V Pb current 0.2-10A (max. 100W). Discharge 0.1-3.0A (max. 8W). Mains or 10-18V supply. MicroUSB port, fan...
Five-cell NiMH battery 6V / 1800 mAh for Futaba transmitters.
Microprocessor quick charger with balancer for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe, LiHV, 2-20V Pb with current 0.1-6A (max. 80W). Discharge max. 2A (max. 10W). Power supply 11-18V / 230V 50Hz. Internal resistance measurement,...
LiPo battery set KAVAN with charging up to 1C and discharging 5 / 10C. Dual cell 2s1p 7.4 V 2600 mAh, dimensions: 93x42x14.5mm, weight 108g, service connector JST-XH, power connector mini-T, adapters for Aurora 9 and 9X.
Transmitter LiPo battery set KAVAN with charging up to 1C and discharging 5C. Dual cell 2s1p 7.4 V 2800 mAh, dimensions: 93x30x16.5mm, weight 88g, service connector JST-XH, power connector FUTABA.
Four-cell receiver set KAVAN 4.8 V/1050mAh in a flat layout with a JR/Hitec/UNI connector. Dimensions 68x31x17.5 mm, weight 85 g.
Four-cell receiver NiMH battery pack 4.8 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. "Cube" arrangement. Dimensions: 55x30x30mm. Weight: 118 g.
Four-cell receiver NiMH battery pack 4.8 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. Side-by-side flat arrangement. Dimensions: 57x53.5x14.5mm. Um
Four-cell 4.8 V 2000 mAh NiMH battery pack with low self-discharge "tailor-made" for Hitec Flash 7 and LYNX 4S, Futaba T3PV, T4PM, T7PX, T7XC, T6K, T10J, T10PX transmitters. Futaba servo connector. Max. discharge current 6A, max. charging current 1A....
Five-cell receiver NiMH battery pack 6.0 V 2000 mAh with cable with JR/UNI servo connector. Cells KAVAN 1.2V 2000 mAh with low self-discharge, max. discharge current 6A, max. charge current 1A. Side-by-side flat arrangement. Dimensions: 71.5x53.5x14.5mm.
RX
LiPo RX-kit 2/3A in series 2500mAh RX-7.4V and transmitter FUTABA 7PX/10PX
LRP Electronic
L430351
Dimensions: 84x30x17 mm, weight 90g, JR connector, EHR balance connector.
Dimensions: 56x31x31 mm, weight 98g, JR connector and XHR balance connector.
Dimensions: 51x38x20 mm, weight 82g, JR connector, EHR balance connector.
Dimensions: 89x29x12 mm, weight 62.3g, Connector: JR/Hitec
Two-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe / LiHV, 2-20V Pb and maintenance-free Pb AGM with 0.1-14A current (max. 2x130W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V. Measurement...
Microprocessor charger 30W with balancer for 2-4 cells Li-poly / Li-Fe with switchable current 1, 2 or 3A. Mains supply 100-240V. Ideal as a much more powerful and intelligent replacement for "box" chargers from RTF / RTR sets.
Microprocessor fast charger with balancer for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe / LiHV, 2-20V Pb / Pb AGM current 0.1-8A (max. 80W). Discharge 0.1-2A (max. 10W). Power supply 12 V / 230 V-50Hz. Measurement of internal resistance,...
for MZ-10 and 12. SJ / JR connector, width 29mm, height 15mm, length 102mm, weight 115g,
Connector: GRAUPNER / JR, width: mm, height mm, length mm, voltage: 3.7V, weight g, For SANWA M-17 transmitter. Can be charged via mini USB type B cable.
Connector: GRAUPNER/JR, width: 29mm, height 14mm, length 62mm, voltage: 3.7V, weight 39g,
Batteries for MZ-16.32 and similar.
Dimensions: 61x46x8.5mm, weight 51g, JR RX connector. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Dimensions: 61x46x8.5mm, weight 51g, JR RX connector. For transmitters: Sanwa MT-44/MT-5, M17 and similar
Dimensions: 95x29x18mm, weight 98g, JR RX connector. For transmitters: Sanwa M 12 / MT-4 / SD-10G, Ezes-X and HITEC LYNX 4.
Capacity: 4000mAh, 5 cells, voltage: 6V, weight: 336g, size: 115x46x24mm and connector: JR / HITEC
Dimensions: 84x30x17 mm, weight 90g, JR connector, EHR balance connector.
Dimensions: 56x31x31 mm, weight 98g, JR connector and EHR balance connector.
Dimensions: 51x38x20 mm, weight 82g, JR connector, EHR balance connector.
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 50x30x32mm and connector: JR
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 84x32x17mm and connector: JR
Capacity: 1600mAh, 5 cells, voltage: 6V, weight: 116g, size: 84x32x17mm and connector: JR