Express delivery
Large selection of carriers
Satisfaction guarantee
The package contains a ready-assembled model of the Blade Nano S micro RC helicopter, with installed electronics. Instructions for use CZ and manual EN, DE, FR, IT.
Blade Nano S3 is one of the best micro helicopters for both normal flight and 3D aerobatics. The model includes a controlled collective, the latest electronics, AS3X and SAFE stabilization systems, altitude hold function and integrated telemetry. Thanks to the top-notch design and stabilization systems, the model is suitable for a wide range of pilots. Less experienced pilots can practice normal flight, while advanced pilots will hone more demanding aerobatic tricks. In the BNF Basic version, it is necessary to add a battery, charger and transmitter (not included in the package).
The new control unit is installed vertically to reduce vibrations and increase control accuracy. As a result, the Blade Nano S3 RC helicopter is easier to control. The rotor blades have better steering response. AS3X stabilization compensates for turbulence and ensures a smooth flight. By choosing one of the three SAFE modes, you can adjust the level of assistance according to your abilities. There is also a Panic function that will put the model into a hover if you lose control of the model during flight or while performing acrobatics. Powerful linear servos in combination with a controlled collective give the model the ability to perform dazzling 3D acrobatics.
The helicopter's construction is made of highly flexible polymers and, together with the main shaft and tail section made of carbon fiber, provides the model with a lightweight airframe with amazing durability.
Most impacts that occur while practicing 3D maneuvers will not cause any damage.
However, if something breaks or breaks, replacement parts are available. The Nano S3 is an ideal small helicopter, mainly for indoor use, with which you can improve your flying skills like never before.
Pilots who have a compatible Spektrum transmitter with a display can take advantage of the battery voltage telemetry.
The Blade Nano S RC helicopter model is equipped with SAFE (Sensor Assisted Flight Envelope) technology - a revolutionary electronic flight protection system that will allow everyone to gain greater confidence in flying.
With the universal SAFE technology flight mode system, you will gradually master the control of the helicopter. To do this, you can use flight modes at your discretion, which you can easily change with a switch.
If you find yourself in trouble, activating Panic Mode will automatically bring the model into a stable hover, preventing a crash. A great feature that will save you money and time spent on repairs.
The SAFE-Z altitude control feature helps keep the helicopter at the same altitude using a carefully programmed accelerometer.
The Blade Nano S3 RC helicopter model has great potential thanks to the controlled collective, which changes the angle of attack of the rotor blades. This system, like in large helicopters, ensures precise control and the ability to perform complex aerobatics.
Thanks to the extensive use of carbon components in the construction and strong and, above all, lightweight composite plastic made of highly flexible polymers, the model has low weight and high resistance in the event of a collision.
With the new design of the control unit with a perpendicular mounting on the airframe, the electronic sensors have better resistance to vibrations. The control unit is mounted on flexible silent blocks.
The digital linear nano servos in the Nano S model weigh only 2.3 g! Only thanks to this can the model achieve extraordinary performance.
The Nano S has a finished light colored fairing with a new design and new Blade logo. The rudder has the SAFE logo.
For commissioning you will need:
For pairing the BNF version model, we recommend modern programmable SPEKTRUM transmitters:
We recommend powering the model with a 3.7V LiPo battery:
For normal operation of flying RC helicopter models, you need a suitable set of tools and a case for storing LiPol batteries. From our assortment, we recommend a quality set of 1.5/2.0/2.5/3.0mm Allen screwdrivers and Modelcraft Phillips screwdrivers (set of 6). For assembly, Modelcraft mini pliers in a case (set) will certainly come in handy.
For quick repairs of helicopter models, we recommend fast-curing instant glues. From our offer, we recommend Robitronic instant glue medium 20ml or Roket Cyano Gel gel instant glue 20ml.
To secure screws against loosening, we recommend Robitronic blue screw glue 10ml.
For gentle lubrication of gears, we recommend the Modelcraft precision oiler with 7.5ml Teflon oil.
For electronics protection NANOPROTECH ELECTRIC 150ml.
Protective packaging is designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can provide high discharge currents and have a large capacity while maintaining small dimensions and low weight. LiPo batteries are particularly susceptible to mechanical damage and therefore need to be carefully protected.
