BLH54550
New product
1 pcs
Place to pick up | Delivery |
Store Českobrodska 566, Praha 9, 19800 | in 30 minutes |
Mode of transport | Delivery |
DPD Private- Delivery to the Czech Republic | Tomorrow |
Czech Post | Tomorrow |
PPL - Delivery to the Czech Republic | Tomorrow |
Zásilkovna | Tomorrow |
Balíkovna | Tomorrow |
Mode of transport | Delivery |
DPD - Delivery to the Slovakia | After tomorrow |
GLS - Delivery to the Slovakia | After tomorrow |
PPL - Delivery to the Slovakia | After tomorrow |
DPD - Delivery to Germany | After tomorrow |
DPD - Delivery to Poland | After tomorrow |
DPD - Delivery across Europe | 30.04. |
GLS - Delivery across Europe | 02.05. |
PPL - Delivery across Europe | 02.05. |
Zásilkovna SK - výdejní místa | After tomorrow |
Zásilkovna SK - Packeta home | 29.04. |
Zásilkovna PL - na adresu | 29.04. |
Zásilkovna PL - paczkomaty | 29.04. |
Hermes DE - výdejní místa | 29.04. |
Rakouská pošta | 29.04. |
-5,44 €
Availability date:
The package includes a ready-made RC helicopter Blade 150 S, which has the following components installed: Spectrum receiver SPMAR6250MHXC, 3x Spectrum servo H2070 MG, main Blade motor AC 1310-5800Kv, tail Blade tail motor AC 150 S / 130 S and Blade regulator dual, AC : 150 S. Instructions in Czech, manual EN, DE, FR, IT.
The RC model of the Blade 150 S BNF Basic helicopter is ideal for advanced piloting training. Rotor diameter 360mm, carbon construction, fully assembled and ready to fly. The controlled team with flight modes for acrobatics offers high possibilities of use. Receiver with advanced SAFE function.
Thanks to the advanced system functions of the innovative SAFE® technology, flying is now much more comfortable. Even if it is your first helicopter with a controlled team, you have electronic stabilization, Panic function and self-balancing flight modes, which give intermediate to advanced pilots greater confidence that they can handle 3D flying indoors and outdoors. The main frame is made of carbon fiber, the servos have metal gears and the main blades are made of reinforced plastic, so they can more easily survive the learning time and increase the life of the model.
Thanks to the innovative SAFE® technology, the Blade 150 S RC helicopter is an excellent model for beginners and advanced pilots. 3 progressive flight modes allow you to learn at your own pace. The flight mode is selected by a switch on the transmitter (5th channel).
Panic function is available in all flight modes. At the touch of a button, the Blade 150S RC helicopter automatically hangs straight, regardless of the previous position of the model.
The all-new design of the Blade 150S chassis, made of carbon plates and aluminum components, takes the rigidity of the frame to a higher level and thus ensures a greater flight experience. In addition, the reinforced tailpipe holder eliminates the need for cross braces, at the same time has a better appearance and is extremely durable.
Cutting-edge technology The spectrum contained in the AR6250MHXC control unit with expertly tuned electronic stabilization and SAFE technology simplifies the learning process and allows the choice of flight mode. Each flight mode has different characteristics, which belong to the degree of piloting. Advanced stabilization simplifies control, fast digital servos respond precisely to control unit commands, and stabilization and control responses are accurate and fast.
If you run the model with a 2nd generation Spectrum transmitter and higher, (an update is required), then you can easily adjust all stabilization parameters directly in the transmitter menu. This feature will be appreciated especially by advanced pilots.
For commissioning you need a 6+ channel transmitter Spektrum ™ DSMX / DSM2 (Spektrum DX6e, DX6 and higher), a LiPol battery 11.1V 400mAh to 500mAh with a JST connector and a corresponding charger.
For pairing models in BNF versions, we recommend modern SPEKTRUM programmable RC kits:
To power the model, we recommend a propellant LiPol battery with 3 cells (11.1 V) 450mAh.
If you decide to use modern Smart LiPo batteries in RC models of planes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:
There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.
If you decide to run the model on conventional LiPo batteries , we recommend using universal chargers with a power of at least 50 W.
Dynamite Prophet Sport charger with two 50 W outputs
To connect a battery with a JST connector and a charger with a 4mm socket output, you will need a charging cable with bananas: JST female charging cable. To connect Spectrum chargers with IC3 connector you need a reduction Conversion cable EC3 male - JST female 20AWG. < / p>
For normal operation of flying RC helicopter models, you need a suitable set of tools and packaging for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). Modelcraft mini pliers in a case (set) will certainly be suitable for assembly.
For quick repair of helicopter models, we recommend a fast-curing instant adhesive. From our offer we recommend Robitronic instant glue medium 20ml or Roket Cyano Gel gel instant glue 20ml.
To secure the screws against loosening, Robitronic screw glue blue 10ml can be recommended.
Modelcraft precision oiler with Teflon oil 7.5ml can be recommended for fine lubrication of gears.
NANOPROTECH ELECTRIC 75ml can be recommended for fine lubrication of gears.
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.