Blade 330 S Smart RTF Basic

SAFE technology

The innovative SAFE technology provides a high degree of confidence in the protection of the flight envelope, and during flight it can facilitate piloting with the help of electronic stabilization for pilots who have not yet reached the level of aerobatic piloting. Stability and 3D flight modes are available, which will allow gradual learning from intermediate to advanced maneuvers.

Progressive flight modes

• 
  
• Stability mode - the tilt angle is limited, after releasing the cyclic lever, the model is leveled to hang
  
• Intermediate mode - tilt angle is not limited, basic acrobatics can be performed
  
• Agility mode - tilt angle is not limited, advanced acrobatics can be performed
  

Panic function

If you get into an emergency while flying in any mode, activate the Panic function and move the control levers to the neutral position (including the cyclic lever). If the model is at a sufficient height, the SAFE technology immediately returns the model to a horizontal position.

Digital servos

The flywheel servos are digital with Spektrum™ H3055 metal gears with a speed of 0.053s/60° at 6V and a torque of 2.5kg.cm and a Spektrum™ H3065 tail rotor servo with a speed of 0.029s/60° at 6V.

Main rotor mechanics

The consistent purposefulness of the construction is obvious, solid steel shaft, aluminum elements for high rigidity and the use of strength plastics for the lowest possible weight, precise control and solid blade holders, all elements in ball bearings, precision processing. Easy to replace if damaged.

Main rotor carbon blades 325 mm

Precise and rigid main rotor blades are very important for favorable flight characteristics, Blade CF FBL (BLH4315) blades are installed

Composite model skeleton

The frame of the Blade 330S consists of a composite 2-part molding on which all the electronics and drive components are installed. The tail pipe is aluminum with a black finish, the drive to the balancing rotor is a belt. The model has a freewheel rotor for the possibility of autorotation.

AC motor

The Blade 330S is powered by a powerful 440X Brushless Outrunner, 4200Kv (EFLM1360HA) high-speed AC motor. The pinion has bevel teeth, the motor is fixed between the sides on an aluminum motor bed.

Control unit

The Spektrum FC6250HX control unit, which contains the necessary SAFE and AS3X technology control software, is attached to the damping moss pad.

Spektrum ™ DXS transmitter

The included seven-channel Spektrum ™ DXS transmitter provides full-range control, proven ergonomics, safe, interference-free transmission, and an LED battery charge indicator in the model.

Recommended batteries

To power the model, you need an 11.1 V LiPo drive battery with a capacity of 2200 mAh with an IC3 or EC3 connector.

• 
  
  
• LiPo battery Spektrum Smart 11.1V 2200mAh 30C
  
• LiPo battery Spektrum Smart 11.1V 2200mAh 50C
  
• LiPo battery Spektrum Smart 11.1V 2200mAh 100C
  
• LiPo battery Spektrum Smart G2 11.1V 2200mAh 100C
  
  

Spektrum batteries with Smart technology currently represent the most modern and safest way to maintain and charge batteries. The benefits of Spektrum Smart technology can be found here.

Recommended chargers for conventional LiPol and Smart batteries

If you decide to use modern Smart LiPo batteries in RC models of airplanes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:

• 
  
• Network charger Spektrum S155 with one output 1x 55W .
  
• Network charger Spektrum S1100 with one output 1x 100W .
  
• Network charger Spektrum S2100 with one output 2x 100W .
  
• Network charger Spektrum S2200 with two outputs 2x 200W .
  

Blade maintenance accessories

For the normal operation of flying RC helicopter models, you need a suitable set of tools and a LiPol battery storage case. From our assortment, we recommend a quality set of 1.5/2.0/2.5/3.0mm allen screwdrivers and Modelcraft Phillips screwdrivers (set of 6). Modelcraft mini pliers in a case (set) will surely come in handy for assembly.

Quick fix adhesives

For quick repair of z helicopter models, we recommend fast curing second adhesives. From our offer, we recommend Robitronic instant glue medium 20ml or Roket Cyano Gel gel instant glue 20ml.

Preparations for securing screws

To secure the screws against loosening, we recommend Robitronic screw glue blue 10ml.

Gear lubrication preparations

For gentle gear lubrication, we recommend the Modelcraft precision oiler with Teflon oil 7.5ml.

Protection of electronics

NANOPROTECH ELECTRIC 75ml can be recommended for gentle gear lubrication.

Protective covers for accumulators

Protective packaging is intended to limit the risk associated with the transport and charging of accumulators. LiPo accumulators, while maintaining small dimensions and low weight, can provide high discharge currents and have a large capacity. The LiPo battery is particularly susceptible to mechanical damage and therefore needs to be thoroughly protected.