Axial LED lighting Night Visions System

The Night Visions System Axial LED Lighting Set is specially programmed for RC car models. The control unit has a 4-9V power supply, external switch, receiver cables (direction, gas) reversing switch and 10 connectors for LED light series. Included are 3mm and 5mm LED sets in different colors.

Connection to the model is simple. Connect the power cable and connect it to the NiMH 6-7S or LiPol 2S battery after completing the lighting. Connect the servo connectors on the control unit to the receiver, to the control unit connect the connectors of the control servo and controller. Connect the appropriate light cables to the LED connectors according to the diagram and install them in the body. On the control unit there is either an external switch on the cable or a power button on the NVS box. In addition, you have the option of using reverse switches for both channels.

LED lighting Axial Night Visions System has a separate power supply 4-9V, if you use a small separate battery (2S LiPol eg BMF25-1300-2EC3), you can use the lighting in any car regardless of the power of the car.

Night Visions System Features

• When driving forward, the white lights come on, while the rear lights are braking, it lights red
• When turning left or right, the orange lights indicate a change of direction
• The control unit has a box of 47 x 32 x 23 mm
• The external switch allows the lighting to be switched off without removing the body
• Separate switch also on the NVS border
• NVS connectors for up to 10 light chain cables