Platinum Pro 130A-HV V4

Top programmable microprocessor controller for brushless motors without sensors ( "brushless, sensorless") designed by taking advantage of the most advanced semiconductor technology features with excellent usability and extensive programming options and settings. Serves to control the speed of AC motors in the larger and giant model aircraft or helicopters power NiCd / NiMH and Li-poly / Li-ion / Li-Fe. It is designed with a high regard for long-term durability and what is required in the competition and giant models. Helicopter offers advanced functionality governor with a number of adjustable parameters constant speed control. It is equipped with a high performance switching BEC power stabilizer with adjustable output voltage providing power the receiver and servos, accumulator. For easy adjustment controller is a special multifunctional LCD programming box Hobbywing or wi-fi module WiFi Express, which are supplied separately.

DESCRIPTION AND FUNCTION CONTROLLER

• Suitable for the vast majority of aircraft brushless motors with power from the battery 6-14S LiPo / Li-ion / LiFe.
• High-performance microprocessor for its governor function (constant speed) and super soft start.
• Special stabilizer for power microprocessor for high noise immunity and reduce the risk of loss of control.
• Technology optimized control DEO (Driving Efficiency Optimization) significantly improves the response of the gas and control the power level that reduces the temperature controller.
• New feeding BEC switched stabilizer with an adjustable output voltage in the range 5-8 V and the carrying capacity of 10 A continuous / 25 A peak.
• BEC is separated from other circuits of the regulator can maintain correct operation even when burning power board with MOSFET controller. < / Li>
• Extensive programming options with a wide variety of customizable features and parameters.
• Flight modes: airplanes, helicopters (linear gas) Chopper (Elf Governor) Chopper (Store Governor)
• The new program governor with adjustable parameters governor P / I provides excellent constant speed, ensures stable rotor speed and sudden changes in load.
• FDR writing speed, minimal stress and maximum temperature during the flight.
• The "restart during autorotation" can manually interrupt autorotation and quickly restart the engine to prevent accidents caused by improper operation model.
• Independent output port for the signals of the tachometer.
• Special programming port for programming the controller parameter setting Multifunctional LCD programming box or module Wi-Fi Express.
• Supports online monitoring data, programming controller firmware update on a PC or smartphone / tablet (requires Multi-function LCD programming box or Wi-fi Express).
• Wi-fi wi-fi module Express (sold separately) for wireless programming of the controller with your smartphone (iOS or Android).
• A number of protective functions: protection at startup, electronic thermal control, thermal protection capacitors, overload protection, overcurrent protection and loss control signal.

PROGRAMMABLE FUNCTIONS

• Flight mode: Allows you to select programs for aircraft, helicopters (linear throttle control), helicopters (s Elf Governor) or helicopters (the governor Store).
• Number of LiPo regulator offers automatic detection of articles or manual settings.
• Method of disconnecting the motor when the activation voltage protection: controller gradually reduces the power at 50% of full power, within 3 seconds after activation voltage protection mode is selected, "Power limitation". When the selected mode is "hard shutdown", the engine is immediately shut down. < / Li>
• PCO - Voltage Protection: Threshold voltage protection is adjustable from 2.7 to 3.7 V / cell.
• Voltage BEC: BEC voltage stabilizing power supply is adjustable in a range from 5.0 to 8.0 in steps of 0.1 V.
• Start Time: The acceleration time is adjustable in the range of 4 to 25 in steps of 1 s.
• Parameter governor P: Determines the ability of the regulator to keep a stable speed.
• Parameter governor I: Specifies the dynamic response of the controller.
• Automatic restart time: In the helicopter mode (Elf / store the Governor) controller switches off the motor, if the gas is between 25 and 40%. If the throttle above 40% during the preset time of automatic restart, the engine is started and rapidly (during the acceleration time set-reset), accelerates to a speed corresponding to the current value of the gas. If the throttle above 40% after a preset time of automatic restart, the controller goes to the soft start.
• Acceleration restart time: Adjustable in the range of 1-3 with increments of 0.5 seconds. This function determines the time it takes the motor restarted and accelerated to full speed in the helicopter mode (Elf / store the Governor).
• Brake: Sets the propeller brake - off, the normal proportional reversal (reversal turn enables the engine is running by means of another channel switch).
• The braking intensity: Adjustable in the range from 0 to 100% in 1% increments to Normal mode brake.
• Timing: Adjustable in the range 0 to 30 ° in increments of 1 °.
• Direction of rotation: Clockwise / counterclockwise.
• DEO freewheel: This function can be enabled or disabled in airplane mode or helicopter (linear gas) to achieve better linearity of response of the gas.

PROTECTION FUNCTIONS REGULATOR

• Protection during acceleration regulator during acceleration measured engine speed. If the revolutions stop or increase their growth is not stable, the controller recognizes this as a wrong start. If at this point the gas to less than 15%, the controller will automatically attempt to restart a new engine; If gas is more than 15%, you must download the throttle all the way down to the new engine is restarted.
• Thermal protection controller If the controller temperature exceeds 110 ° C, the controller will gradually limit performance, but does not switch off the motor entirely. To ensure that the engine keeps performing and not causing the crash, the maximum power limit of about 50% full power. As the temperature regulator to drop, the controller gradually restore maximum performance. Additionally, when the switching regulator temperature must exceed 70 ° C, otherwise the engine can not be turned on.
• Thermal protection capacitors: the controller activates this protection, if the temperature of the filter capacitor exceeds 130 ° C. Protects the filter capacitors as well as thermal protection controller protects the controller itself.
• Signal loss of gas regulator switches off the engine when the signal is missing for 0.25 s to avoid even greater damage and risks resulting from the rapidly rotating rotor or propeller. When there is a normal signal, the controller resumes normal operation.
• Overload Protection: The controller turns off the engine and restarts automatically when the load suddenly increases to a very high value. (Perhaps due to blockage of the propeller or rotor).
• Thermal protection: the controller switches off the engine when the current approaches the value of short-circuit current (400 A). This protection can be activated by a short-burning engines or other causes.

Tip: When ever you first turn on the regulator first calibrate the extent of gas according to the instructions. Only then you can use the controller and set other parameters via the multifunction LCD programming box or Wi-Fi Express.