- -5.76 €
Traxxas Stampede 1:10 BL-2s RTR Green
Express delivery
Large selection of carriers
Satisfaction guarantee
Package contents
The package includes a fully assembled Traxxas Stampede 1:10 2BL RTR RC car model with installed components: 3300rpm AC motor, BL-2S AC controller, Traxxas 2056 servo, 2.4GHz 3-channel receiver. TQ. Traxxas transmitter 2.4GHz 2 channels. TQ. Accessories: Allen key (1.5, 2, 2.5 mm), Phillips key, pistons and washers for springs. Instructions CZ, manual EN, DE, FR, SP.
Characteristics
The Stampede 1:10 Monster Truck RC model is powered by an AC motor and a BL-2S controller for powering 2S LiPo batteries. The alternating drive system brings more brutal acceleration, long life and a model speed of up to 64 km/h. In addition, the model is equipped from the factory with an Extreme Heavy Duty kit for high durability and an exclusive clipless body clamping system.
The construction with a nylon chassis provides high strength, durability, and the model is light and agile at the same time. The proven Magnum 272 transmission with an adjustable friction clutch is used to drive the rear wheels. High traction is ensured thanks to the placement of the engine behind the rear axle. The excellent driving characteristics are due to the precise geometry of the suspension, and in combination with the long lift of the shoulders, you can overcome even more demanding terrain.
The regulator with three driving modes guarantees fun for adults and children thanks to the possibility of limiting the power to 50%. Despite the increased speed and acceleration, compared to the DC drive, affordable operation on 2S LiPo batteries is maintained. Control is provided by a TQ 2.4 GHz transmitter with precise control mechanics. Of course, a wide range of tuning parts is available, including complete spare parts.
News overview
AC drive BL-2S
The BL-2s AC drive with a 3300rpm/V motor increases speed and acceleration by up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings and an internal cooling fan give the motor long life with minimal maintenance.
Extreme Heavy Duty kit installed
The Factory Installed Extreme Heavy Duty suspension and drivetrain kit is made from the most durable materials Traxxas uses.
Clipless bodywork
The unique system of fixing the body with beaks in the wheel arches, allows quick and easy battery replacement, and the clean look of the model is not disturbed by clips. Unlike traditional posts with clips, the body fits the clipless holder with a much larger area and does not crack.
Construction
The chassis is made of nylon, which is filled with glass fibers for greater strength and toughness. The chassis is spatially shaped to have high rigidity. The engine with gearbox and differential is located at the rear of the model. The drive system forms a compact closed unit, which makes the Traxxas Stampede RC car model an undemanding model.
Gearbox, adjustable disc clutch and planetary differential
The gearbox, disc clutch and planetary differential are enclosed in one compact unit. A gearbox with a friction clutch reliably transmits the power of the engine to the axles, a planetary differential gearbox The Magnum 272™ has gears made of hardened steel. This system requires absolutely minimal maintenance. There are pinions and sprockets with different numbers of teeth, so you can fine-tune the model for speed and technical tracks.
Friction clutch
The Revo Spec Torque Control friction clutch ensures smooth power transmission and is adjustable. A properly set amount of slip protects the drive train, while not reducing the acceleration of the model.
Oil dampers
High-lift oil shocks use dual X-rings for perfect sealing and perfect running. Robust design combined with high oil volume can absorb even hard impacts in difficult terrain. You can tune the dampers to your liking by adjusting the springs and changing the viscosity of the oil.
Wheelie wheels
Thanks to the rear bar with Wheelie wheels, you can enjoy driving on the rear wheels without worrying about the model tipping over. In addition, the durable nylon wheel holder provides extra protection for the engine and transmission.
High ground clearance
With more than 10 cm of ground clearance in the center of the chassis, you can go places and overcome obstacles with the model that other RC cars cannot handle.
Wheels and tires
The Bigfoot rides on large chrome All-Star 2.8" wheels. The unique rubber compound of the Talon tires has high grip on a wide variety of surfaces including dirt, grass, concrete and rocks.
Servo steering
Digital servo standard size Traxxas servo 2056 6.2kg.cm waterproof with DC motor and nylon gears has a torque of 6.2 kg.cm and a speed of 0.20 s/60°@ 6.0 V. For water resistance*, the servo box is fitted with a seal.
AC motor 3300kv
The Traxxas 3300kv AC motor provides the ideal affordable drive for 1:10 models with all the benefits of high performance, long life and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. Other features include:
- Integrated cooling fan
- High speed ball bearings
- High acceleration
- Efficient operation for longer driving time
Electronic regulator BL-2S
Waterproof* BL-2S electronic AC controller with three driving modes, 2S LiPo battery support and easy EZ-Set™ button control. The controller is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually familiarize themselves with the features of the model and prepare for the full power of the car. Thermal protection, protection against underdischarge of LiPo batteries, gold-plated connectors, simple operation, intuitive signaling with a two-color LED diode and a powerful cooler that can be supplemented with an optional fan (not included in the package).
BL-2S controller modes
- Sport : Default mode, forward, braking and reverse are possible.
- Race : Mode suitable for racing. Forward and brake is possible; reverse is not available.
- Training : Mode suitable for children or novice riders. It is possible to drive forward with a power limitation of 50%, brake and drive backwards again with a power limitation of 50%.
Traxxas TQ RC Kit
The model is controlled by a two-channel proportional steering wheel RC radio Traxxas TQ, working in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.
There is a rotary knob on the transmitter that trims the steering (so that the model goes straight if the steering wheel is in the center position). The status of the batteries in the transmitter is indicated by an LED. Reverse can be set on the transmitter on the throttle and steering channels.
TQ receiver
The Traxxas TQ 2.4 GHz three-channel receiver ensures safe driving without interruptions. Easy pairing with one button. Status indication by means of an LED diode.
Properties
- Complete assembled model in 1:10 scale
- Factory installed kit for high durability - Extreme Heavy Duty
- Clipless body attachment system
- 3300Kv AC motor with integrated cooling and Quick Connect connector
- BL-2S AC controller with three driving modes
- Waterproof* servo 2056 High Torque
- Magnum 272 transmission with hardened steel gears
- Revo Spec Torque-Control™ friction clutch
- Telescopic shafts with joints
- Oil dampers
- Traxxas TQ 2.4 GHz RC Kit
- The model is ready for upgrade to a more powerful VXL drive
* Refer to the user manual for information on the water resistance specification. You can find tips and tricks for operating in wet conditions in the blog.
We recommend to buy
To operate the model, you need 4x AA batteries for the transmitter, a drive battery and a charger for the drive battery.
Recommended LiPo batteries:
With modern LiPo batteries, the RC model will have high performance and drive for the maximum possible time. The model can be operated on a 2-cell (7.4 V) LiPo battery.
- For higher performance Traxxas LiPo battery 7.4 V 5000 mAh
- For higher performance and mechanical resistance, the Traxxas 7.4 V 5200 mAh Hardcase LiPo battery
- For higher performance and long driving time Traxxas LiPo battery 7.4 V 5800 mAh
- For higher performance and extra long driving time Traxxas LiPo battery 7.4 V 7600 mAh
Recommended NiMH batteries:
NiMH batteries do not require precise handling and are therefore suitable if the RC model car is operated by children (NiMH batteries are not destroyed by complete discharge). However, NiMH batteries do not provide such performance.
- Traxxas NiMH battery 8.4 V 3000 mAh (high)
- For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (high)
- NiMH battery Traxxas 8.4 V 3000 mAh (flat)
- For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (flat)
Recommended Traxxas Chargers
Traxxas universal chargers can charge Traxxas LiPo and NiMH batteries. Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , so you're always sure to connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.
- Traxxas EZ-Peak 50W Single Output Mains Charger
- Traxxas EZ-Peak 2x50W mains charger with 2 outputs
To use larger batteries, you can purchase a Traxxas compartment extension.
LED lighting
Equip the model with front LED lighting for a breathtaking ride day and night. Thanks to this lighting, your model will become a real gem. High-luminosity diodes are not only effective, but also provide a strong stream of light. At the same time, the lighting provides a better overview of the model's position. Lighting assembly requires the following parts:
- LED front lighting
- Cable for LED lighting
Other accessories
Carrying bag and backpack
Carry the RC model comfortably and safely in a Traxxas sports bag or backpack. In addition to the main large pocket for the model, there are specially designed side pockets for batteries, charger, tools, etc.
Stand
The aluminum swivel stand will be the perfect addition to your service table or display shelf. The stand facilitates the maintenance of the model and at the same time prevents the deformation (stretching) of the tires during long-term standing.
Work mat
Work mat 91x51cm, for service of RC models and other modeling work. Prevents damage to the workbench, resistant to chemicals. Practical compartments for organizing parts and tools.
Accessories for normal operation
For normal operation of the Traxxas RC car, you need bolt glue, good quality tire glue, silicone shock oil and a set of screwdrivers. We recommend an affordable set of tools for cars from our range.
The thread or head of the screw is dripped with screw glue, which fixes it and the vibrations caused by driving prevent the screw joint from loosening. The screw adhesive has a special composition that allows the screw connection to be easily loosened with an adequate torque without damaging the screw head. Never use ordinary instant glue, it might be impossible to loosen a screw stuck like this!
Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!
Sometimes it is necessary to add silicone oil to the dampers of the model. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. So-called repair kits are supplied for these cases. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are delivered to all shock absorbers. Piston rods with a TiN surface are easily recognized by their golden-green color.