Shopping Cart
There are no more items in your cart
KAVAN Power CA 20g medium instant glue (CZ)
KAV56.9952.CZ
Kavan
Excellent medium-second adhesive, working time 7–10 s, solid joint 20–30 s. For gluing wood, metals, most plastics incl. EPP/EPO (not suitable for polystyrene foam, polyethylene and Teflon). Packaging: 20g bottle.
Express delivery
Large selection of carriers
Satisfaction guarantee
Medium second (cyanoacrylate) glue for modeling and general use. It comes in a bottle with an applicator attachment.
Medium second adhesive with medium viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical method of application: glue is applied to one of the contact surfaces and the parts are immediately attached to each other, but it is also possible to apply the glue to the joint of well-fitting parts attached to each other.
Properties
- Color: clear
- Viscosity: 90-120 mPa.s
- Density: 1.04 g/cm3
- Optimum temperature for application: 23 °C
- Curing time (depends on the temperature and nature of the bonded materials): 5–30 s
- Full curing: 24 h
- Optimal gap width between glued parts: zero
- Cured glue is soluble in: acetone, dimethylformamide, acetonitrile
Recommended activator: KAV56.9958.CZ Activator CA 150ml, KAV56.9959.CZ Activator CA 200ml spray, KAV9977 KAVAN PRO activator CA spray 150ml.
Recommended peeler/debonder: KAV9979 KAVAN peeler CA 20g
Removing excess uncured glue: a cloth or paper towel moistened with KAV9979 CA releaser or acetone (if the bonded materials can withstand it).
Thinning the glue: if the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" super glue, just use a lower viscosity type. Individual types of POWER CA instant glues can be mixed together to achieve optimal viscosity.
Use as sealant, suitable fillers: microballoon filler KAV9980 CA KAVAN filler.
Suitable for bonding: soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.
Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 °C to +10 °C). Do not expose to temperatures below +2 °C.
Durability: if the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.
The product contains substances classified as dangerous in the sense of Regulation (EC) No. 1272/2008. For detailed information, see the "Downloads" section.
Last items in stock
Speed boat kit for 400 series electric motors. Bulk model with hull and superstructures made of PSH plastic, ship's shaft, rudder and scale accessories.
Last items in stock
Motor yacht kit for electric series 400. Model in bulk with hull and superstructures made of PSH plastic, ship's shaft, rudder and scale accessories.
Glider category A1 (F1H) classic all-balsa construction from CNC cut parts. High pre-workmanship, easy construction, excellent flight characteristics. Ideal as the first "adult" model of a glider.
Kit of the free-flying glider A1 (F1H) "Der kleine FALKE" with a span of 1240 mm with the possibility of installing RC control and a drive unit with an electric motor. All-balsa model made of laser-cut parts with pre-ground Jedelsky system wing and...
All-balsa handball with laser-cut and pre-ground parts with a span of 710 mm for beginning modelers. Ideal as a first kit for learning the basics of building model aircraft.
Glider category A3 classic all-balsa construction from CNC cut parts. High pre-workmanship, easy construction, excellent flight characteristics. Ideal as the first "adult" model of a glider.
Quick kit of the semi-scale model Me-109 with a span of 280 mm with a rubber beam drive from laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
Last items in stock
Cyanoacrylate (instant)
KAVAN POWER CA PACK adhesives 3x20g (_, S, H) + PRO activator 200ml (CZ)
Kavan
KAV56.9955.CZ
Set of three 20g instant glues (thin, medium, thick) and PRO activator 200ml.
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Finely porous polypropylene-based material for ultra-light, extremely durable flying models - indoor airplanes and park-flyers, shock-flyers and many others. VectoPor plates are almost indestructible and extremely resistant to breaking and tearing; can...
Torpedo boat kit for 400 series electric motors. Loose model with PSH plastic hull and superstructures, boat shaft, rudder and model accessories.
Last items in stock
Patrol boat kit for electric series 400. Model in bulk with hull and superstructures made of PSH plastic, ship's shaft, rudder and scale accessories.
Pilot boat kit for 400 series electric motors. Scale model with hull and superstructures made of PSH plastic, ship's shaft, rudder and mock-up accessories.
Quick kit of the Pilatus PC-12 shadow semi-scale model with a span of 273 mm with a rubber beam drive made of laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
Last items in stock
Motor Yacht Kit for 500 Series Electric Motors. Model in hull and body shells from PSH plastic, ship shaft, rudder and macadam accessories.
Glider category A3 classic all-balsa construction from CNC cut parts. High pre-workmanship, easy construction, excellent flight characteristics.
Speed kits of the semi-scale model Edge 540 with a span of 280 mm with a rubber bundle drive made of laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
Category A1 (F1H) glider of classic all-balsa construction made of CNC carved parts. High sophistication, easy construction, excellent flight characteristics. Ideal as a first "adult" glider model.
A simple glider of the classic all-balsa construction category. Ideal for learning the basics of classic model aircraft construction.
F6F Hellcat shadow semi-scale quick kit with a span of 260 mm with a rubber beam drive made of laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
P-40 Warhawk shadow semi-scale quick kit with a span of 286 mm with a rubber beam drive made of laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
Beech Bonanza shadow semi-scale quick kit with a span of 318 mm with a rubber beam drive made of laser-cut balsa parts. Construction wing with self-adhesive foil printed cover. Ready to fly in 2 hours.
Last items in stock
Police boat kit for 400 series electric motors. Model in bulk with hull and superstructures made of PSH plastic, ship shaft, rudder and model accessories.
Fire boat kit for 400 series electric motors. Model in bulk with hull and superstructures made of PSH plastic, ship shaft, rudder and model accessories.
Customers who bought this product also bought:
Six-cell battery pack 7.2 V 2000 mAh NiMH with low self-discharge "tailor-made" for Hitec Aurora 9 transmitters. Hitec connector. Max. discharge current 6A, max. charging current 1A. Dimensions: 103x43.5x14.5 mm. Weight: 172 g.
Programmable AC controller for aircraft models. Constant current 30A (peak 45A), power supply 2-4 LiPo cells, switched BEC 5.2V / 3.5A, weight 23g, dimensions 37x17x5mm.
- -0.71 €
Water-soluble dyes for models - 18 ml
Wall thickness: 0.45mm, weight: approx. 20g/m, outer diameter: 6.0mm, inner diameter 5.1mm, applicable for 5mm shafts.
Excellent super-thin instant glue, solid bond 1-5 s. For gluing wood, metals, most plastics (not suitable for polystyrene foam, polyethylene and Teflon). Packaging: 20g bottle.
Clear nitro lacquer for protection of metal parts and tensioning of covering papers for small models and mini models. For application by brush, roller or spray. Packaging can 100 ml.
Tap to zoom
