Express delivery
Large selection of carriers
Satisfaction guarantee
Four-channel computerized steering wheel RC kit Futaba using the T-FHSS SR 2.4GHz transmission system with super fast response for competition and advanced recreational model cars and boats. The transmitter can also be switched to transmission modes with T-FHSS telemetry or without S-FHSS telemetry to use the full range of T-FHSS and S-FHSS receivers for RC cars and boats. With the R334SBS T-FHSS SR/T-FHSS receiver included in the kit, you have 4 PWM channels for classic servos and the ability to transmit telemetry from sensors connected to the S.BUS2 socket. It also allows the connection of the FS-RM005 transmitter module for controlling Kyosho Mini-Z Evo models.
The T4PM plus transmitter in a classic steering wheel design with a handle that fits perfectly in the hand is equipped with a steering wheel control, a throttle trigger, two push-button switches, one rotary control and five digital trims (3 around the steering wheel, 2 on the handle). Three buttons and a multifunctional joystick are used for programming; a large backlit LCD display ensures easy orientation in the intuitive menu. The T4PM has a memory for 40 models and a wide range of advanced programming functions for common and special car models - e.g. independent steering and drive (with 2 regulators) of the front and rear wheels for crawlers, dual-circuit brakes for large 1:5 models, a gyro for drifting, ABS, traction control, mix for tanks, etc.
To start the transmitter, you will need 3 AA alkaline batteries or NiMH batteries stored in the holder supplied with the transmitter, or a 4-5-cell NiMH or 2S LiFe battery pack.
T-FHSS SR transmission system
The super-fast response transmission system (servo signal period 2.45 ms or repetition rate 408 Hz) allows the use of only special Futaba SR digital servos with extremely fast response on channels selected on the transmitter for which SR mode is enabled. On other channels where SR mode is not enabled, regular digital servos and speed controllers can be used. Analog servos CANNOT be used. Does not allow telemetry transmission.
T-FHSS transmission system: Normal/High Speed mode
This transmission system allows the transmission of telemetry data from sensors connected to the S.BUS2 socket on the receiver. The “Normal” mode allows the use of any servos (analog and digital) or RC devices, since the repetition period of the servo signals is 15 ms (repetition frequency 66.7 Hz). The “High Speed” mode can only use digital servos and most other devices, such as speed controllers for AC motors. The repetition period of the servo signals is 3.3 ms (repetition frequency 303 Hz). ATTENTION: The transmitter is not compatible with the T-FHSS Air receivers for flying models.
S-FHSS transmission system: Normal/High Speed mode
The “Normal” mode allows the use of any servo or RC device, since the servo signal repetition period is 13.6 ms (repetition frequency 73.5 Hz). The “High Speed” mode can only use digital servos, including the BLS series and most other devices such as speed controllers for AC motors. The servo signal repetition period is 6.8 ms (repetition frequency 147 Hz).
FUNCTION
Program functions
Compatible receivers
RC KIT INCLUDES
