Obrázek
Obrázek
Obrázek
Obrázek

HS-5646WP HV Waterproof (12.9kg 0.18s)

1HI3212
Hitec
Strong standard digital servo 61g with metal gears and increased supply voltage (2s LiPo) 2xBB, thrust 12.9 kg/cm, speed 0.18s/60st at 7.4 V. The servo is dustproof and waterproof. Ideal for off-road cars 1:10 and 1:8, boats, submarines. Replaced by Hitec D6 s
More info
In stock - main warehouse: 3 pcs
Recommended retail price
54.78 €
Your price with VAT
()
45.27 €
Price without VAT
45.27 €

  • Did you find a better price?
  • Did you find a better price?

    * Required fields

    We will reply as soon as possible, usually within a few hours.

    By submitting the form you agree to the processing of your personal data (read)

     

     

    Express delivery

     

    Large selection of carriers

     

    Satisfaction guarantee

     

    Powerful, accurate and particularly powerful digital servo standard size with metal gears and output shaft is mounted in two ball bearings. Thanks to the increased supply voltage (up to 7.4 V, 2s Li-poly / Li-Fe) enables very simple implementation of the on-board electronics with 2.4GHz Optima series receivers when power dvoučlánku Li-poly or Li-Fe without the need of additional stabilizers or regulators .

    Thanks prachutěsnému and waterproof case (resistance according to International Protection Code IP-67 - completely prevents contact with dust, can withstand immersion in water to a depth of 1 m for 30 minutes the test run) is particularly suitable for off-road models of cars, ships and submarines - simply places exposed to dust and moisture, with high demands on tensile strength and overall mechanical performance servos.

    Programmer digital servos Hitec HFP-10 *, HFP-20 HFP-25, HPP-21 or HPP-21 Plus can be programmed:

    • reset to factory defaults,
    • the width of the deadband
    • sense of rotation
    • rotational speed
    • neutral
    • the deflection
    • enable or disable fail-safe
    • Setting emergency deflection fail-safe
    • Servo protection against overload (power limit 0-50% Overload)

    *) Note .: Hacker older HFP-10 can not be programmed overload protection.

    size servos Standard
    type servo digital
    Move at 6.0V [kg / cm] 11.3
    Move at 7.4V [kg / cm] 12.9
    The speed at 6.0V [s / 60st.] 0.2
    The speed at 7.4V [s / 60st.] 0.18
    transfers servos a metal
    Ball bearings 2xBB
    High-voltage Yes
    [V] 6 - 7.4
    Length [mm] 41.8
    Width [mm] 21
    Height [mm] 40
    Weight [g] 61
    Intended for aircraft, terrain cars, sailboats, boats
    Obrázek Obrázek 2
    Last items in stock
    Universal PC interface for software programmer and servotester for all Hitec programmable servos (classic and brushless). Allows you to set the amount of deviations, neutral, fail-safe, speed, direction of rotation, deadband, soft start and resolution
    Flat extension cable with JR connectors 100 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the connection of the connectors.
    Flat extension cable with JR connectors 150 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the connection of the connectors.
    Flat extension cable with JR connectors 300 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the connection of
    Flat extension cable with JR connectors 600 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the connection of
    Flat extension cable with JR connectors, length 750 mm with PVC insulation, conductor cross-section 0.33mm2 / 22AWG. The socket (counterpart) is equipped with a snap-in fuse to secure the connection of the connectors.
    Flat extension cable with JR connectors 900 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the connection of
    Twisted strong extension cable with JR connectors, length 600 mm with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-in fuse to secure the connection of the connectors.
    electronic

    HFP-30 Hitec digi servo programmer

    Hitec
    1HI3306
    HITEC digital servo programmer (all series) and servo tester. For programming HITEC digital servos of the HS-5xxx, HS-7xxx, HSB-9xxx, Dxxx series and testing all types of servos (digital and analog). Possibility of synchronous programming of two...
    Obrázek
    Last items in stock
    Professional double-sided servo lever 24 teeth with offset for Hitec HS-5xxx/7xxx servos. Made from aluminum and ready to use M3 ball studs. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm for servos
    levers

    Servo lever 45mm (1.75 ") 25 teeth M3

    Kavan
    KAV20.3705
    Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 45mm; 38mm; 32mm.
    levers

    Servo lever 51mm (2 ") 25 teeth M3

    Kavan
    KAV20.3706
    Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 36mm; 42.5mm; 51mm.
    Obrázek
    Last items in stock
    Professional double-sided 24-tooth servo lever for Hitec HS-5xxx / 7xxx servos. Made of aluminum and ready to use M3 ball joints. Hole spacing: 89mm; 76.5mm; 63.5mm
    Double arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo discs.
    Double arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
    levers

    Servo lever carbon single arm 40x21mm

    Kavan
    KAV20.3914
    Single-arm universal carbon lever for servos 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
    One-arm universal carbon lever for servos 66x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
    Single arm universal arc carbon lever for servos 53x20mm, center hole 9mm. For screwing onto standard plastic servo discs.
    Obrázek
    Last items in stock
    Double arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
    Professional double-sided servo lever with offset for servos with 25-tooth output hexagon (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm
    Obrázek Obrázek 2
    Last items in stock
    Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 89mm; 76.5mm; 63.5mm.
    Other

    Servo Washers (8pcs)

    PELIKAN
    2DH0066
    High quality aluminum washers for servo mounting.
    Twisted extension cable with JR connectors with a length of 1200 mm with PVC insulation, conductor cross-section 0.33 mm2 / 22AWG. The socket (counterpart) is equipped with a snap-on safety device to
    Twisted strong extension cable with JR connectors 300 mm long with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-on safety device to ensure the con
    Twisted strong extension cable with JR connectors, length 900 mm with PVC insulation, conductor cross-section 0.25 mm2. The socket (counterpart) is equipped with a snap-in fuse to secure the connection of the connectors.
    For servos Hitec HS-765/5745/7966/6975/7975/5955/7955/7954/7940/7950/7945/5646) Massive levers for heavy servos including mounting silent blocks

    Customers who bought this product also bought:

    🎁 Dear customer, we would like to inform you that all orders will be shipped from January 6th. Thank you for your understanding and we wish you a happy holiday!!