Traxxas TRX-4M Land Rover Defender 1:18 RTR ochre

Metal chassis frame

The chassis consists of two C-shaped steel profiles connected by plastic crossbars, thus ensuring a rigid structure that minimizes twisting. Heavier components such as the battery and motor are stored on the bottom of the chassis to maintain a low center of gravity.

Suspension for Trial

The TRX-4M uses a sophisticated 4-point solid axle suspension with heavy-duty tie rods and ball-joint ends.

4x4 drive

The 4x4 drive is realized through fixed differentials. For extremely smooth running, there are parallel CV joints on the front axle.

Telescopic shafts

Telescopic central drive shafts allow for full suspension travel and are also equipped with parallel CV joints.

Turning angle 45°

The 45° turning angle of the front wheels gives the model an exceptionally small turning radius and high maneuverability of the model, suitable for driving indoors or during trial rides over obstacles. Compared to other models of this size, the TRX-4M has a turning radius up to 50% smaller.

GTM oil shock absorbers

The TRX-4M is equipped with oil-filled GTM shock absorbers for a smooth ride and realistic ride characteristics without. The shock absorbers absorb the shocks and the ride is beautifully smooth without bouncy.

• 
  
• Easy spring preload adjustment with washers
  
• Long run of shock absorbers with oil filling
  
• Double O-rings for sealing
  

Easy removal of the battery

The well-thought-out system of securing the battery in the bulkhead using a rubber band is a small thing, but it greatly simplifies and speeds up the replacement of the battery. In addition, the rubber band firmly fixes the battery.

Terrain wheels and tires

The design of the 1" wheels and tires is taken from the larger TRX models, but even with smaller dimensions, a high level of detail is maintained. Tires with a foam insert and a soft compound provide high traction. The driver is six-edged 7 mm.

Servo steering

Traxxas servo 2065T digital nano servo with DC motor. The servo has a torque of 2.5 kg.cm and a speed of 0.20 s/60°@ 6.0 V. For water resistance*, the servo box is fitted with a seal. The gears are nylon and the main gear wheel is metal for high durability.

Powerful engine

The Titan 180 87T DC motor provides a wide range from low revs for technical riding to higher speed for crossings. The fixed gap between the teeth is precisely defined and does not need adjustment.

Control unit

The new ECM-2.5 control unit integrates the controller and receiver. The electronics are protected in a waterproof* box. Features include: LVD - LiPo battery under-discharge protection, easy one-button EZ-Set adjustment and 3 special driving modes.

Power supply max. 2S LiPo. Powerful 6V BEC for servo. Accurate and reliable control at 2.4 GHz frequency. The unit is ready to connect ProScale lighting.

Driving modes:

• 
  
• Sport Mode – gas, reverse and brake (no automatic brake in neutral)
  
• Trail Mode - gas, reverse and brake (soft brake in neutral), suitable for downhills
  
• Crawler Mode - throttle, instant brake in neutral, allows transition into reverse without double pressing. Suitable for technical riding
  

Traxxas TQ RC Kit

The model is controlled by a two-channel proportional steering wheel RC radio Traxxas TQ, working in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.

There is a rotary knob on the transmitter that trims the wheel steering (to make the model go straight if the steering wheel is in the center position). The status of the batteries in the transmitter is indicated by an LED. Reverse can be set on the transmitter on the throttle and steering channels.

Accumulator

The included 2S LiPo 750 mAh battery provides powerful power for up to 1 hour of operation. The specially designed connector plugs directly into the control unit.

USB charger

The package includes a USB charger for convenient charging. The specially designed ID connector is safe and prevents incorrect connection. The charging status is displayed by the LED on the charger.
Although the charger can be powered from any USB-A output, for fast charging with a current of up to 2A, it is necessary to have a sufficiently powerful USB source, such as a Network Universal USB Adapter (source).

Recommended spare batteries

To extend the driving time, we recommend purchasing another identical battery, which is included in the package.

• 
  
• Traxxas 2S LiPo 750 mAh battery
  

For charging at full power, we recommend powering the USB charger with a powerful Network universal USB adapter (source).

ProScale lighting

For a breathtaking look and new features, install the Pro Scale lighting, which gives you realistic car-like features (headlights, tail lights, functional brake and reverse lights, hazard lights).

Towing device with trolley

Transport cargo in style with a genuine Traxxas towbar and truck.

Tuning accessories

Enhance the Traxxas TRX-4M RC model car with a wide variety of tuning parts and accessories, thanks to which you can get new functions, modify the handling characteristics, increase the durability and change the appearance exactly to your liking. For inspiration, visit our blog: TRX-4M or TRX-4M Bronco Tuning Accessories - Tuning Upgrades.

Accessories for normal operation

For normal operation of the Traxxas RC car, you need bolt glue, good quality tire glue, silicone shock oil and a set of screwdrivers. We recommend an affordable set of tools for cars from our range.

The thread or head of the screw is dripped with screw glue, which fixes it and the vibrations caused by driving will not allow the screw connection to loosen. The screw adhesive has a special composition that allows the screw connection to be easily loosened with an adequate torque without damaging the screw head. Never use ordinary instant glue, it might be impossible to loosen a screw stuck like this!

Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!

Sometimes it is necessary to add silicone oil to the dampers of the model. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. For these cases, so-called repair kits are supplied. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are delivered to all shock absorbers. Piston rods with a TiN surface are easily recognized by their golden-green color.