Combo XR10 PRO G3 G2 + V10-17.5T G5 Torque

XERUN XR10 Pro G3

The XERUN XR10 Pro G3 160A ESC offers everything you need to fully exploit the potential of your top-of-the-line 1:10 racing, drifting, rally or F1 RC car or 1:10 off-road buggy with a brushless motor. It allows the use of a brushless motor with sensors (sensored) and without sensors ("sensorless") and offers 3 selectable program profiles - each with a wide range of programmable parameters for perfect adaptation to the engine, chassis and track. It is suitable for competitions in which timing changes are allowed during the run as well as for races with zero timing (boost). So, if you take driving your supercharged "tenth" with a brushless motor seriously, the XERUN XR10 Pro G3 controller from Hobbywing is the right one for you!

Features

• Specially developed for RC cars: 1:10 road (including drift, rally and Formula 1) and off-road buggies, optimized for modified car racing with the ability to change timing
• For 3650/540 brushless motors with and without sensors with 2S LiPo power supply: motors 4.5 turns and more for touring cars, 5.5 turns and more for buggies
• Compact dimensions, low weight, intelligent fan
• Preset firmware (can be freely changeable) for races with zero and variable timing with 3 profiles (1/10 stock with zero timing, 1/10 On-Road, 1/10 Off-road) with 44 programmable functions including Boost and Turbo timing (up to 64°) brutally increasing performance
• Powerful switched BEC stabilizer up to 6 A with adjustable voltage 5.0-7.4 V
• Advanced protection functions (voltage protection, thermal protection, fail-safe, etc.), protection against reverse polarity of the supply voltage
• Programming possible using the multifunctional LCD programming box PRO (separately, with a PC program or mobile application) or the OTA Bluetooth module (with a mobile application)
• Updatable firmware using the multifunctional LCD programming box PRO or OTA Bluetooth (sold separately)
• Option to monitor operating data using the multifunctional LCD programming box PRO or OTA Bluetooth module and a mobile application, built-in memory module for data recording (up to 19 sets of records every 20 minutes) allowing viewing of recorded values after a ride in the mobile application using the OTA Bluetooth module

• General: Setup mode (offers a full menu with all 44 functions or a reduced basic menu with the 24 most necessary functions), Driving mode, Max. reverse power, Voltage protection, ESC thermal protection, Motor thermal protection, BEC voltage, Smart fan, Automatic shutdown (including the ability to turn off the controller with the transmitter), Sensor mode, Motor rotation direction, A/C phase reversal
• Throttle control: Throttle response control, Throttle curve, Neutral range, Throttle start value, Range, Driving switching frequency, Softening value, Softening range, Freewheel, RPM drop rate
• Brake control: Resistance brake intensity, Resistance brake aggressiveness, Resistance brake switching frequency, Max. braking effect, Brake control rate, Brake control mode (Linear/Traditional/Disc), ABS intensity, Brake curve, Brake switching frequency
• Timing: Boost timing, Boost timing activation, Boost initial speed, Boost final speed, Boost initial throttle, Boost final throttle, Turbo timing, Turbo delay, Turbo addition rate, Turbo subtraction rate
• Configuration: Number of motor poles, Gear ratio, Wheel diameter

XERUN V10-17.5T G5 Torque

The high-performance two-pole sensored AC electric motor of the XERUN V10 G5 series is ideal for racing series (STOCK) cars in scales 1:10 and 1:12. Compared to conventional motors of this size, it offers higher performance and efficiency, automatic optimization when used with HOBBYWING XERUN XR10 series controllers. The motor is dustproof and thanks to its modular design, it allows easy maintenance and repair. If you want to give your model a more powerful motor with a longer lifespan and greater adjustment options in cooperation with an intelligent controller, the XERUN V10 G5 electric motor is the right one for you!

• Compared to the previous generation of XERUN V10 G4R motors, it offers 4% more power and efficiency at a weight that is 13 grams (8.5%) lighter
• The built-in chip is optimized for use with HOBBYWING XERUN XR10 series controllers; the controller automatically identifies the motor and creates a drive system operating in full sensor mode with excellent performance and precise control.
• Highly stable power and torque throughout the entire operating speed range; extremely smooth operation at low speeds.
• The motor uses patented Hall sensor technology; The high-speed and high-precision encoder always provides a clean signal indicating the rotor position, which effectively suppresses possible sensor signal interference and makes the motor run more reliable.
• Adjustable distance between the rotor and Hall sensors for fine-tuning performance
• CNC machined aluminum alloy housing with large ventilation holes (further enlarged compared to G4R), high-purity copper wire winding, advanced rotor design with protective shell and patented cooling system, super-thin silicon steel sheets, high-quality stainless steel shaft, precision ball bearings for high durability and smooth operation, large-section solder leads with low internal resistance.
• Mechanical timing adjustable in the range of 20-60°.
• A pair of sensor sockets allows the sensor cable to be connected in the direction of the longitudinal axis of the motor or perpendicular to it for perfect adaptation to your chassis.
• Modular design for easy maintenance and repair/replacement of parts.

Combo includes: XERUN XR10 Pro G3 controller with cables, XERUN V10-17.5T G5 Torque motor, instruction manual.