Express delivery
Large selection of carriers
Satisfaction guarantee
Fully assembled Losi Polaris RZR Pro R RC car model with installed components: Spektrum AC motor Firma 3800Kv 4-P, Spektrum Smart AC regulator Firma 130A 2-4S, Spektrum receiver 6200A DSMR AVC, Spektrum servo S614S MG (steel) WP 23T. Spektrum DX3 Smart DSMR transmitter. Accessories: 4x AA batteries for the transmitter. Instructions CZ, manual EN, DE, FR, IT.
The Losi Polaris RZR Pro R RC model car is officially licensed by Polaris and modified from its top-of-the-range SxS range, it is built on the RZR Rey chassis - an evolution of the highly successful Losi Baja Rey chassis. Until now, the Rey was only available with front independent and rear fixed axle. On the RZR Rey, the rear suspension was redesigned with new independent trailing arms. The Polaris RZR Pro R looks and handles like the real thing, with excellent off-road handling.
With a 1:10 scale and four-wheel drive, the Polaris RZR Pro R handles a wide range of terrain. It will pass over smaller stones, sand, clay, grass and bushes. You can even take it with you to sandy terrain. Fit the right sand tires and it's a great machine that you can run around loose and clay with no worries. In America, large off-road vehicles are very popular, the first UTVs (Utility Terrain Vehicles), from the early 2000s, were utility vehicles made for agricultural and construction work. It didn't take long for the desert racing community to modify them into more powerful off-road SxS (side-by-side) machines at a fraction of the price of a full-fledged race car. Now all SxS enthusiasts can enjoy the same fun anytime, anywhere with this first ever 1:10 scale SxS RC model from Losi!
The Losi Polaris RZR Pro R is fully assembled and ready to go, replicating the look of a full-on big car with molded body panels, a roll cage and officially licensed BFGoodrich KM3 tires on Raceline A93 Podium rims. The model has a Spektrum AC drive installed, which can be powered by a 2S or 3S LiPol battery (not included) and reaches a maximum speed of more than 70 km/h!
The Losi RZR Pro R RC model is produced under license from Polaris. Now you can drive this original model in 1:10 scale! The model is fully assembled and ready to run, replicating the look of the original SxS with molded body panels, roll cage and officially licensed wheels and tires. You only charge your battery with a charger.
The RZR Rey is the next model in the successful Losi Baja Rey development line, with a new independent rear trailing arm suspension. As a result, it combines the cornering speed of the independent A-arm suspension, with the ability to absorb uneven terrain similar to a solid rear axle.
Access to chassis components and battery is just as easy as other one-piece body and clip-on cars. To replace the battery or perform maintenance, the complete Polaris RZR Pro R body panel cage can be removed with just four body clips.
The car's lighting is provided by LEDs, which are part of the front and rear lights for dark driving when the sun goes down. Light up the night desert darkness and start Off-Road action with new experiences!
The 8-spoke design of the officially licensed Raceline A93 Podium Wheels is truly iconic. They are used on the Losi Polaris RZR Pro R model and are also the most popular brand of wheels used on full-sized Side-by-Side cars.
Officially licensed BFGoodrich KM3 tires feature the design of the Baja Championship series winners. Not only are the tires durable and realistic, they give the Polaris RZR Pro R relentless traction on the most extreme and demanding terrain.
The RZR Rey cuts through tough terrain with confidence! Its carefully designed, fully independent A-arm front suspension allows each side to respond to the situation at hand, providing more precise steering, greater control and confident handling.
Adjustable long stroke oil shocks easily absorb energy from big jumps. There is a thread on the damper body for the adjustment sleeve nut, so you can fine-tune the spring preload setting. Outer stops provide a soft landing after long jumps.
The single-speed gearbox and all three differentials are sealed to withstand tough driving conditions. M1 module steel gears increase durability and have the ability to handle the performance of a high-performance AC motor.
The basis of the RZR Rey platform is a 3mm aluminum chassis strength plate with a 2.5mm top plate for added durability. The underside is an excellent sliding surface when driving over terrain and has high strength and stiffness at the same time.
The RZR Rey model car's installed power system consists of a waterproof Spektrum 3800Kv AC motor and a SMART Spektrum Firma 130A AC controller. Handling 2S or 3S LiPo batteries (sold separately), this powerful combination can blast your car onto the racetrack or over the hills at 70km/h!
The included Spektrum DX3 RC kit has several advanced features for better car control. The battery status indicator on the transmitter will inform you when it is time to recharge the LiPol drive battery. A 3-position switch allows you to set throttle limits if you don't want to use the full speed potential. AVC (Active Vehicle Control) technology allows you to set the stability you need to ensure stable cornering or use full speed without having to ease off the gas.
To put the model into operation, a LiPo 2S or LiPo 3S drive battery and an adequate drive battery charger are required.
The model can be operated on a 2- to 3-cell LiPo battery. The accumulator should be fitted with an EC5 or IC5 connector. For normal driving, we recommend a 2-cell LiPol battery (7.4 V).
Spektrum batteries with SMART technology currently represent the most modern and safest way to maintain and charge batteries. The benefits of Spektrum Smart technology can be found here
Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. In addition, G2 batteries have up to 3x faster automatic discharge into storage mode. Smart G2 batteries can only be charged on Spektrum Smart and Smart G2 chargers .
Spektrum Smart chargers can charge both Smart and Smart G2 batteries as well as conventional batteries. Previously sold Smart chargers, once updated, also support Smart G2.
For the normal operation of the Axial RC car, you need tire glue, screw glue, a tool kit and silicone shock oil. We recommend an affordable tool kit for RC cars from our range.
Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. We recommend Robitronic Tire Glue from our offer.
Sometimes it is necessary to add silicone oil to the shock absorbers of the model and change the oil in the differentials. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. Repair kits or individual parts are supplied for these cases.
For routine maintenance, screw glue is needed. Screws screwed into the metal material (e.g. screws in the motor, worm gear in the pinion) must be secured against loosening with this glue.
Protective packaging is intended to limit the risk associated with the transport and charging of accumulators. LiPo accumulators can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for a long driving time. Conversely, the LiPo battery is especially susceptible to mechanical damage.
