Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Sale is over
Obrázek
Obrázek
Obrázek

KAVAN Li-Po 3300mAh / 22.2V 40 / 80C, 73.2Wh

KAV33.6050
Kavan
LiPo battery set KAVAN with increased load capacity 40 / 80C, charging up to 2C. Six-cell 6s1p 22.2V 3300 mAh, dimensions: 138x43x41.5mm, weight: 439g, service connector JST-XH.
More info

Sale is over

 

Express delivery

 

Large selection of carriers

 

Satisfaction guarantee

 

KAVAN 40 / 80C series lithium-polymer batteries with increased load capacity pump new fresh energy into the veins of your models! Thanks to the advanced technology used in production, they guarantee an extremely high current carrying capacity during discharging, enable fast charging with a long service life and a favorable purchase price.

KAVAN batteries of the 40 / 80C series have a standard discharge current of 40C, peak up to 80C and the possibility of fast charging (1-2C). They are designed for more demanding applications in aircraft models for classic and 3D acrobatics, models powered by a blower and helicopters for classic and 3D acrobatics. The high current carrying capacity guarantees maximum use of engine power and allows a vigorous flying style while maintaining a very good long life.

Do not charge KAVAN 40 / 80C batteries with a current greater than 2C, for normal operation we recommend using currents in the range of 1-2C. We recommend using a balancer each time you charge. KAVAN 40 / 80C series batteries do not require initial molding, but if you intend to charge the kits with a current greater than 1C, we recommend that you do not exceed 1C for the first three charging cycles. There is no need to discharge them before charging - for example, you can safely charge 50% discharged batteries.

The set is supplied in the "Air Pack" version designed primarily for the propulsion of aircraft and helicopter models. It is equipped with silicone power (charging) cables with a cross-section dimensioned with respect to the expected current load (without connectors). The service connector is a standard type of JST-XH system - their advantage is small size and weight (which is especially appreciated by users of small capacity sets), they have easy connection of terminals and can even be connected directly to balancer sockets on many chargers KAVAN, RAYTRONIC, SkyRC, GT Power etc. without the use of any adapter.

The set contains: KAVAN battery series 40 / 80C, instructions.

Capacity [mAh] 3300
Voltage [V] 22.2
Charging current [A] 3.3 - 6.6
Max. charging current [A] 6.6
Discharge current [A] 132
Max. discharge current [A] 264
Energy [Wh] 73.2
Length [mm] 138
Width [mm] 43
Height [mm] 41.5
Weight [g] 439
Obrázek Obrázek 2
Last items in stock
Accessories

iSDT BAP6 smart LiPo module for 5-6S

iSDT
ISDT1020
Smart module for 5-6S LiFe, LiPo, LiHv, ULiHv. Connection via battery balance connector. Miniature dimensions 36x24x9mm, weight only 4.7g. Controlled by BT via BattAir application.
Dual-channel quick charger with balancers for 1-16 cells NiCd / NiMH, 1-6 cells Li-Po / Li-ion / Li-Fe / LiHV, 2-24V Pb current 0.2-20A (max. 2x100W with mains supply or 2x 500W with DC power supply). Discharge 0.2-1.5 A (max. 2x 15W). Power supply...
margin from 1.5 to 1.7 m

60” Edge 540 ARF - green 1.52m

OMP
OMPP004G
ARF kit of a 3D acrobatic special with a span of 1,524 mm, intended for propulsion by an AC electric motor 1200-1600W with 6S LiPo. Very light structural construction with Kevlar® and carbon reinforced parts, many carbon parts.
Obrázek
Last items in stock
margin from 1.5 to 1.7 m

60” Edge 540 ARF - orange 1.52m

OMP
OMPP004O
ARF kit of a 3D aerobatic special with a span of 1,524 mm, intended for propulsion by an AC electric motor 1200-1600W with 6S LiPo. Very light structural construction with Kevlar® and carbon reinforced parts, many carbon parts.
margin from 1.5 to 1.7 m

60” Edge 540 ARF - yellow 1.52m

OMP
OMPP004Y
ARF kit of a 3D acrobatic special with a span of 1,524 mm, intended for propulsion by an AC electric motor 1200-1600W with 6S LiPo. Very light structural construction with Kevlar® and carbon reinforced parts, many carbon parts.
1.7-2 margin

74" Edge 540 ARF - green 1.87m

OMP
OMPP006G
ARF kit of a 3D aerobatic special with a span of 1,880 mm, intended for propulsion by a gasoline engine with a content of 35-40ccm or an AC electric motor of at least 3000W with 8-12S LiPo. Very light structural construction with Kevlar® and carbon...
1.7-2 margin

74" Edge 540 ARF - orange 1.87m

OMP
OMPP006O
ARF kit of a 3D aerobatic special with a span of 1,880 mm, intended for propulsion by a gasoline engine with a content of 35-40ccm or an AC electric motor of at least 3000W with 8-12S LiPo. Very light structural construction with Kevlar® and carbon...
1.7-2 margin

74" Edge 540 ARF - red 1.87m

OMP
OMPP006R
ARF kit of a 3D acrobatic special with a span of 1,880 mm, intended for propulsion by a gasoline engine with a content of 35-40ccm or an AC electric motor of at least 3000W with 8-12S LiPo. Very light structural construction with Kevlar® and carbon...
1.7-2 margin

74" Edge 540 ARF - yellow 1.87m

OMP
OMPP006Y
ARF kit of a 3D acrobatic special with a span of 1,880 mm, intended for propulsion by a gasoline engine with a content of 35-40ccm or an AC electric motor of at least 3000W with 8-12S LiPo. Very light structural construction with Kevlar® and carbon...
margin from 1.4 to 1.6 m

Turbo Bushmaster ARF 1830mm Red

Taft Hobby
4ST24TB
The kit contains an almost finished STOL model of the Turbo Bushmaster airplane from EPP with a span of 1830 mm with an AC motor, a controller and fitted servos. Controlled ailerons, flaps, rudder and elevator.
margin from 1.4 to 1.6 m

Turbo Bushmaster ARF 1830mm Red LED

Taft Hobby
4ST24TBL
The kit contains an almost finished STOL model of the Turbo Bushmaster airplane from EPP with a span of 1830 mm with an AC motor, a controller and fitted servos. Controlled ailerons, flaps, rudder and elevator.

Customers who bought this product also bought: