Kyosho KB10L Toyota Tacoma TRD Pro Elec Lime VE 3S 4WD 1:10 Readyset

Enjoy the powerful performance of a pickup truck in a realistic 1:10 scale!

With large tires, off-road chassis and large rear cargo space, pickups are in high demand in North America, Southeast Asia, Africa and Australia, and many popular pickups have been converted into R/C models. This model is based on the 3rd generation Tacoma, which first appeared to great acclaim in 2016 for its aggressive styling and practicality.

The top model Tacoma TRD Pro has been rendered by Kyosho with a durable 1:10 scale Readyset chassis. The KB10L chassis is based on the off-road chassis KB10 and, thanks to the long wheelbase and short tread, perfectly matches the bodywork. The 4WD shaft drive system reliably transmits the brutal power of the TORX10L AC motor, and under the control of ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery, it reaches a maximum speed of approximately 75 km/h . This bargain Readyset package packs the fun of an ultra-large pickup on a dynamic off-road chassis with build quality similar to premium, show-only models.

• • The readyset includes an R/C system pre-installed on the chassis and a transmitter with a pistol grip.
  • The pre-painted and assembled body "Toyota Tacoma TRD Pro" in ultra scale fully reflects the appearance of the original truck.
  • Newly designed body mounts cover the body pins from the outside to realize a greater sense of scale.
  • LED lights (sold separately) can be attached to the front and rear light buckets. The sense of scale is further enhanced when the 4 front lights and 2 rear lights (4 if rear fog lights are installed) are fully lit.
  • We recommend: Front 4 lights, rear 2 lights (97054-4CR x 1, 97054-2B x 1) / with rear fog lights, front 4 lights, rear 4 lights (97054-4B x 1, 97054-4CR x 1)
  • The KB10L chassis with full-time all-wheel drive can handle rough roads and flats.
  • Battery holder compatible with 3S size batteries. The battery is fixed with a belt that can be easily removed and put on.
  • It features a powerful TORX 10L AC motor and a waterproof BRAINZ 10+ AC controller.
  • Construction with three differentials for better running stability. The center differential is pre-filled with No. 10000 oil and the front and rear differentials are pre-filled with No. 5000 oil.
  • Fully equipped ball bearings (22) for optimal drive efficiency and durability.
  • Each gearbox, receiver is enclosed in a sealed box to prevent exposure to sand and dirt while driving.
  • The included Syncro KT-231P+ pistol grip transmitter allows for various setting changes.
  • Charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately.

The low and wide polycarbonate body shape has been perfectly rendered with the exclusive TRD Pro front grille. Durable 1.5mm PC body.

Front and rear body mounts are provided from under the chassis so the look is not marred by exposed body pins on the outside of the body.

The KB10L model is based on the Mad Wagon off-road chassis in 1/10 scale. It has an extended wheelbase and shortened suspension arms with 4WD drive.

The 4WD drive axle system with center differential transmission reduces engine speed for optimal power transfer to the front and rear wheels. The newly designed long aluminum chassis ensures reliable traction even on surfaces with low grip.

Oil shock absorbers reliably dampen feedback from the road surface and thus stabilize the chassis during driving. The pre-mounted shocks are pre-filled with oil and the stiffness (hardness) of the springs has been optimized for the KB10L chassis.

Suspension and steering linkages allow for easy camber and lean angle adjustments.

The newly used inter-axle differential on the KB10L chassis optimizes the distribution of power to the front and rear wheels when cornering and thus ensures smooth cornering. An IF245 steel spur gear can be installed as an option for the 1/8 scale NEO series Inferno Buggy. (Requires separate bearing BRG005.)

The chassis is equipped with planetary differentials at the front and at the back with the option of being driven by a powerful AC motor. The IS117 hard bevel gear can be installed as an option for the 1/8 Inferno NEO ST 3.0 model. (Bearing BRG005 must be purchased separately.)

The newly designed wheels and tires show excellent grip on and off the road. The tire tread and wheel design replicates the actual vehicle style, giving it a fully realistic feel.

Completion Requirements:

• • AAA size x 4 batteries for the transmitter
  • Battery for drive (2-3S LiPo battery *Battery size 143x47x30mm)
  • Charger for LiPo battery

Technical parameters:

• • Length 572 mm
  • Width 274 mm
  • Height 214 mm
  • Wheelbase 340 mm
  • Spacing F/R 224 mm
  • Tires (F & R) ?110 x 47 mm
  • Gear ratio 10.41:1
  • Weight 3410g (approx)
  • Motor TORX10L AC motor kv2850

Package contains:

• • Factory assembled chassis with complete control rods.
  • Pre-cut and painted bodywork with pasted decals
  • Syncro KT-231P+ 2.4 GHz transmitter
  • L-shaped hex key 1.5mm/2.0mm/2.5mm
  • Cross key
  • 4/5/5.5/7/10mm integrated wrench