KAVAN light balsa putty 200ml - balsa color (CZ sticker)

Super light modeling putty ready for use on balsa, plywood, expanded polystyrene and glass laminate. Easy to apply, dries quickly; it is ground and processed like balsa. It dries without shrinkage; ideal for making fills and transitions. Compatible with most paints, varnishes and coating foils (if in doubt, first test the sealant on a piece of material).

Color: balsa color

Use

• Clean the sealed area with a brush or vacuum cleaner.
• Stir before use. If the sealant is too dry, add a few drops of water and mix. Too much water can cause shrinkage after drying.
• Apply the sealant with a plastic spatula or spoon. Close the container carefully immediately after use.
• Wash contaminated surfaces, tools and hands with soap and water before the sealant dries.
• After the sealant is completely dry, sand with a sandpaper until smooth. Avoid breathing dust when sanding. Always use a respirator.
• The curing time depends on the thickness of the applied layer. Thin layers (up to 1.5 mm) can be sanded after 15 minutes, thicker layers allow to dry for 1 hour or longer.
• If the sealed area needs to be strengthened, simply saturate it with KAVAN (PRO) thin instant glue.

Suitable for sealing: balsa, chipboard, plywood, metal, expanded polystyrene, glass and carbon laminates.

Not suitable for sealing: soft and flexible plastics (incl. EPP and EPO), polyethylene, polypropylene, Teflon, metals.

Storage: in a cool (10 ° C to 25 ° C), dry and dark. Do not expose to temperatures below 10 ° C.

Shelf life: If the conditions of proper storage are observed, we guarantee the shelf life of the unopened product for a period of 1 year while maintaining the above properties.

The mixture is not classified as dangerous according to Regulation (EC) No 1272/2008.